a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Code 36- Distributor ignition system. Faulty high resolution (360X) pulse or multiple low resolution pulses detected. Check pigtail connector from distributor to main harness for any opens or shorts. Verify wiring is okay before replacing distributor.
Most all mechanics pull the dome light fuse before working in the interior to avoid draining the battery.. On the 1994-95 Camaro the 20 Amp fuse courtesy light, also illuminates the orange security light in the dash cluster. If the security light is out, and your car won't start, it's because the VATS is in theft mode and you don't see it. Clean the key, if that don't work you may have an open short or broken wire in the orange jacket of the ignition (key) switch. Disconnect the harness connector and connect a matching resistor with the correct ohms of your key inline with the purple and white wires without cutting the connectors off, because you may latter need them. - Original Owner of 1995 Camaro.
check pass key circuit in steering column for open. a easy test is to install key with pellet,and check resistance value at the end of harness. this harness will have a bright orange color. may need to disasm C100 to access terminals.(large connector under dash by steering column). the value of the key should be close to the value at end of wires. if values are not close,(IE: OL or infinity) then replace ignition lock cylinder AND key. you will need to take original key when purchasing new one due to the special resistance value the key contains.(1 thru 15 different values!)
what happens is the lock cylinder has small wires that move everytime you turn the key,and eventually break causing theft system to "think" a theft attemt has occured,and disables crank or fuel delivery systems.
ARE YOU AWARE THEY MAKE A VERY INEXPENSIVE ADAPTER HARNESS THAT HOOKS UP TO THE FACTORY HARNESS, NO WIRE CUTING,CAR AUDIO SHOP CAN GET THE ONE U NEED, ABOUT $12. HERE IS THE WIRING COLOR BREAKDOWN OF THE DASH HARNESS. 2002 Chevrolet Cavalier Car Stereo Radio Wiring Diagram
Car Radio Constant 12v+ Wire: Orange Car Radio Switched 12v+ Wire: Ignition Switch (The radio harness does not provide a switched power source. Run a wire from the Ignition Switch.) Car Radio Ground Wire: Black Car Radio Illumination Wire: Gray Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger: Pink Car Stereo Amp Trigger Wire: N/A Car Stereo Amplifier Location: N/A Front Speakers Size: N/A Front Speakers Location: N/A Left Front Speaker Positive Wire (+): Tan Left Front Speaker Negative Wire (-): Gray Right Front Speaker Positive Wire (+): Light Green Right Front Speaker Negative Wire (-): Dark Green Rear Speakers Size: N/A Rear Speakers Location: N/A Left Rear Speaker Positive Wire (+): Brown Left Rear Speaker Negative Wire (-): Yellow Right Rear Speaker Positive Wire (+): Dark Blue Right Rear Speaker Negative Wire (-): Light Blue
You have two wire of 12V + going to your stereo, one is hot all the time and one comes from the ignition switch ( which turn on the stereo when you switch on the car), if it's the +12V one which is hot all the time, you can take another wire from your car's cigarette lighter 12V outlet. if it's the ignition +12V one, you can trace back the wire to ignition switch and change the wire if it's broken.
Hope it helps and please rate the answer if it was helpful, thanks!
1999 Hyundai Accent Car Stereo Radio Wiring Diagram Car Radio Constant 12V+ Wire: Red/Yellow Car Radio Ignition Switched 12V+ Wire: Blue/White Car Radio Ground Wire: Black Car Stereo Illumination Wire: N/A Car Stereo Dimmer Wire: N/A Car Stereo Antenna Trigger Wire: N/A Car Stereo Amplifier Trigger Wire: N/A Front Speakers Size: 5 1/4′ Front Speakers Location: Doors Left Front Speaker Wire (+): White/Red Left Front Speaker Wire (-): Black/Red Right Front Speaker Wire (+): White/Blue Right Front Speaker Wire (-): Black/Blue Rear Speakers Size: 6 1/2′ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): White/Red Left Rear Speaker Wire (-): Black/Red Right Rear Speaker Wire (+): White/Blue Right Rear Speaker Wire (-): Black/Blue
Stick with oem so you dont have to screw with power ratio settings.. Nor nasty fabrications...And not he Pntiac wont work.... you spend more moeny for harnesses and spec bolts, though it will fit just need to be customized...
You need to attach the blue wire on the stereo harness to the blue and white wire on the car adapter harness. they installed a small amplifier to power the rear door speakers and unless you connect those two wires then the speakers will not work.
Yes this is not to bad to deal with.. make sure you use quality wire connectors so you don't have problems later with bad connections. you pretty much just have to match the colors from the harness in the car to the ones on your deck. If you don't want to cut off the harness connector on your deck just purchase one that you can connect to your deck and cut the wire ends on the other side of the adapter. The only wires you wont be able to match color for color is speaker wires... for these you will just have to hook them up temp. and test to see that they are connected to the proper speaker output.
Read more >> Options >>