Question about 1998 Mazda Pickup

2 Answers

Clutch it wont go into gear when the truck is running but will when the truck is turned off

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 335 Answers

Thc Clutch is hydrulic controlled if you have a leak and have lost the fluid the clutch is not going to work and the reason it goes into gear with the engine off is the transmission is not operating and can easily go into gears because there is no syncronizers needed to help mesh the gears.
Or the clutch is bad does the clutch pedal feel normal? If so the clutch needs to be replaced

Posted on Jul 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 77 Answers

You could have throw out bearing problems or a broke clutch cable or linkage

Posted on Jun 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Goes into gear without using clutch and wont move??


the clutch cable is jammed holding the clutch off or the master cylinder has a blockage in the compensating port holding the clutch off
replace either of what you have

Jan 31, 2016 | Cars & Trucks

1 Answer

Car stuck in first gear wont shift at all


Suspect the clutch is frozen and even when you press the pedal it does not disengage. If it shifts into other gears without the engine running. you will need to break the clutch free. Put it is high gear with the clutch depressed and rock the car back and forth with a bunch of friends pushing on it.

Apr 01, 2014 | Chrysler Sebring Cars & Trucks

2 Answers

As I would drive the 2000 ford focus I'm not sure if it was the clutch or the transmission but its like the car would go to a lower gear for a minute and then catch back up. Then I happened to be driving...


I believe it's your clutch. If you can shift gears okay with the engine off, but you cannot shift gears with the engine running, (the gear shifter only grinds when trying to shift into first?) then your clutch has worn out.
To replace a clutch, the transaxle has to be first removed from the car. I'm afraid you will have to have it towed to a shop or garage.

Nov 08, 2013 | Cars & Trucks

2 Answers

Push on clutch and caR WONT GO IN GEAR UNLESS MOTOR OFF


Some of that model had an unusual clutch mechanism, which has probably broken due to wear. Read here

http://wiki.answers.com/Q/How_to_adjust_clutch_on_1995_ford_escort

In the event yours is instead fitted with a hydraulic clutch, either

- the hose has split
- the clutch throwout lever has broken or collapsed

Mar 21, 2012 | 1995 Ford Escort

1 Answer

HARD TO SHIFT INTO GEAR. IF I SHIFT INTO FIRST BEFORE I START THE TRUCK IT WILL SHIFT EASILY IF STARTED IT HARD TO SHIFT.


hi it sounds like your clutch is on its way out thats why when the engine switch off its easy for the gear to go in but when the engine is running the flywheel is turning and makes if very difficult or sometimes impossible to engage the gear as the clutch is worn and wont disengage .

Sep 02, 2010 | 1996 Mazda Pickup

1 Answer

After being stored clutch willnot engage


do you mean wont disengage? does the pedal feel normal, or like its pushing nothing?cant put it in gear? or goes in gear but wont move?. if you put it in gear but car wont move, the clutch is toasted. if you can put it in gear with the engine off, but not when its running, check the clutch master fluid. if its low or out, then the slave or master is leaking and you will need to replace both. if the clutch arm IS working, and the pedal feels normal, sometimes you can put in gear, and start it with the clutch pedal depressed and drive it, and goose the gas to "break the disc loose"

Oct 14, 2009 | 1997 Suzuki Sidekick

3 Answers

Nissan sentra 1997 starts but wont go when put in gear


is it a manual or automatic?if it's manual check clutch.if it is automatic check transmission fluid.

Dec 02, 2008 | 1997 Nissan Sentra

1 Answer

Wont go into gear but tries to engage gear with clutch depressed


put a new clutch pressureplate in it . it is gone

Nov 11, 2008 | 1994 Saturn Sl

Not finding what you are looking for?
1998 Mazda Pickup Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...