Question about 2004 Lincoln Aviator

2 Answers

I PURCHASED THIS 2004 AVIATOR USED WITH NO KEYLESS ENTRY CODE.

NEED TO LOCATE THE KEYLESS ENTRY CODE.

Posted by on

  • 2 more comments 
  • jose9espinoz Aug 25, 2008

    I have the sme problem

  • Anonymous Mar 18, 2014

    just got it

  • Anonymous Mar 23, 2014

    KEYLESS ENTRY PROGRAMMING CODE

  • Anonymous Mar 31, 2014

    I need to find the keyless entry code for the door key pad.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The keyless code is by the right rear door panel. open the door, remove the panel that's over the the seatbelt. after doing that open but you don't have just kind of stretch out and their you will find a black box or reciever with a sticker and a 5 digit code stamped on it. if you want to change the passcode refer to your manual, but you'll need the original code to be able to change it.

Posted on Nov 13, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I purchased a 2004 lincoln aviator from a small used car dealer but it does not have the manual, so i dont find the door code anywhere, what can i do to be able to unlock the code and make a new one?

Posted on Aug 02, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I reset my keyless entry lock on 2005 Lincoln Aviator. I just bought it used with no manual and the dealer doesn't know code? I called Lincoln customer care and they too did not know. They said it...


Hello Dale.

I did a little searching for you as I couldn't find it in the manual.
I hope this answer from another site will help you.
http://answers.yahoo.com/question/index?qid=20070903211239AAnCjDz

I have never had to search for the module as they are a reliable component. But this does make sense to me.

Thank you for using FixYa.
KL

Mar 07, 2011 | 2005 Lincoln Aviator

1 Answer

Bought a 1989 Lincoln Town care. don't know the code for the keyless entry or how to change it


A little secret to finding the code for keypad. Open the trunk. There should be a sticker on one of the trunk hinge arms with numbers on it. If you locate that sticker, there is the code for the keypad.

Jun 10, 2010 | 2004 Lincoln Aviator

1 Answer

Remove or disable keyless entry code.


this code is located on a module on inside left rear panel where your car jack is located you will need a flashlight to look up on the module there will be a sticker on this module with 5 digits this will be the original factory code to lock or unlock your car . inside your owners manual there is a procedure to change the code .

Mar 19, 2010 | 1994 Ford Explorer Limited

1 Answer

I don't have a manual for my 2004 lincoln Avaitor but would like to know how I can change the code on the drives door key pad


KEYLESS ENTRY SYSTEM With the keyless entry keypad, you can: • lock or unlock the vehicle doors without using the key. Your vehicle has a factory set 5 digit code that operates the keyless entry system. You can also program your own 5 digit personal entry code. The factory-set code is located: • on the owner's wallet card in the glove compartment • or at your dealer. When pressing the controls on the keyless entry keypad, press the middle of the controls to ensure a good activation. This system will disable the power door lock controls. These will not work until the vehicle is disarmed. Programming your own personal entry code To program your own code: 5. Enter factory set code (keypad will illuminate when pressed). 6. Press 1/2 control within five seconds of step 1. 7. Enter your personal 5 digit code. Enter each digit within five seconds of previous one. 8. After the code is entered, the locks will cycle, confirming that the new code has been set. Do not set a code that includes five of the same number or presents them in sequential order. Thieves can easily figure out these types of codes. Your personal code does not replace the permanent code that the dealership gave you. You can use either code to unlock your vehicle. If a second personal code is entered, the module will erase the first personal code in favor of the new code. Locks and Security 149 Locks and Security If you wish to erase your personal code, use the following instructions: 1. Enter factory set code. 2. Press 1/2 control and release. The system will now only respond to the factory set code. Anti-scan feature The anti-scan feature prevents repeated attempts at arriving at a valid key code. The keyless entry pad is disabled for 1 minute after 7 unsuccessful attempts (35 consecutive button presses) at entering a valid key code. The keypad will flash during this 1 minute mode. However, the 7/8 and 9/0 controls will still lock the vehicle. Anti-scan will be turned off after: • one minute of keypad inactivity. • the remote entry transmitter UNLOCK button is pressed. • the ignition is turned to the ON position. Unlocking the doors with the keyless entry system To unlock the driver door, enter either the factory set code or the personal code (each digit must be pressed within five seconds of the prior digit). The interior lamps will also illuminate. To unlock all doors, enter the factory set code or personal code (driver door unlocks) and press the 3/4 control within five seconds. Locking the doors with the keyless entry system It is not necessary to enter the factory or personal code prior to locking all doors. To lock the doors: • with the driver's door closed, press the 7/8 control and the 9/0 control at the same time.

Dec 17, 2009 | 2004 Lincoln Aviator

2 Answers

Where is the keyless entry code located


go to the dealership and they use a master code and then you can enter your own personal code

Dec 14, 2009 | 2004 Mercury Montery

1 Answer

How to change keyless entry code when I don't know the current


Open the right/rear door. Pull the rubber weatherstrip back from the door opening. Fold the right/rear seat back down into a locked position, in order to access to the right/rear trim panel. Carefully, pry the right/rear upper trim panel housing the right/rear seat belt height adjuster. Now carefully pry back the lower trim panel taking care now to break it, exposing the vehicle security module with three connectors plugged into it, coloured green, blue, and grey. Look on the label that has the part number which should end in EB. There are FIVE numbers to the right of that number. Those five numbers are your keyless entry keypad code.

Sep 15, 2009 | 2004 Lincoln Aviator

1 Answer

Would like to rekey my auto-keyless entry and cannot find the code near the instrument panel.


your factory code for keyless entry by number pad? this is found on the module for keyless entry located under dash left side, number on module in BOLD type is the original or factory code

May 18, 2009 | 2004 Ford Expedition

1 Answer

Keyless entry code for 2003 lincoln aviator


Every car different, call an auto rescue or towing company, the trucks are usually equiped with slim jims, that can be used to gain access to your vehicle.

Hope this helps.
Ed

May 05, 2009 | Lincoln Aviator Cars & Trucks

1 Answer

Location of computor module for keypad entry


the keyless entry module is on the drivers side of the truck up under the dash directly above the emergency brake. The tag should have a 5 digit number in bold, that is your door code.

Mar 23, 2009 | 2004 Ford F150

3 Answers

Entry code om drivers door


The keyless entry module is located in the rear of the vehicle on the driver's side. You will need to partially remove the left rear panel in the cargo area. You will then see the keyless entry module bolted behind a metal reinforcement bar. There is a sticker on the module that has the 5 digit entry code.

May 26, 2008 | 2001 Mercury Mountaineer

Not finding what you are looking for?
2004 Lincoln Aviator Logo

942 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...