Question about 2002 Mitsubishi Eclipse

2 Answers

RADIO/CD PLAYER 2002 MITS ECLIPSE GT

NEED CODE FOR RADIO

Posted by on

  • 1 more comment 
  • sher1rn Jan 23, 2009

    I got my car repaired and it rendered the radio/cd player unusable without a code. i tried a few different codes and now it's totally locked up.

  • Anonymous Jan 28, 2009

    i cant figure it out

  • tchernof May 13, 2009

    I got my car repaired and it rendered the radio/cd player unusable without a code. i tried a few different codes and now it's totally locked up.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You will have to call Mitsubishi for the code if it's not in the Owner's Manual (like my wife's wasn't). Call Mistu with the VIN# and Serial# of the radio at hand.

To get the VIN number, check the bottom of the front window.

For the Serial # from the radio: Remove the two screws under the center console. There is one on each side of the console (you may have to lay on the floorboard to see them clearly). Then pull out the two air vents from the center console (this will help you get a good grip for the next part). Hold the edge of the top of the console and the air vent for either side and pull it towards the rear of the car. I had to wiggle the console pretty vigoursly to get both sides out. Be sure not to pull it too far from the dash right away because you'll need to disconnect the hazard light switch prior to completey removing the console cover. Once that is disconnected you can safely move the console cover. This will expose the mounting braket. There two screws on the side of the mounting braket for the radio. Just unscrew those and you can remove the radio and see the serial number on top of the radio (you may also be able to see it if you just look in the space above the radio while it's still in the mounting braket but I wanted to make sure I had all the numbers/letters correct and didn't have to go through this again). Just do everything in reverse (don't forget to plug the hazard light switch back in!) to get it all back together.

Posted on Dec 02, 2008

The code is in the owners manual. otherwise
Call 1-888-MITSU2006
just give them the last four digits to my cars vin number and the serial and model numbers from my stereo and they gave me the code.

Posted on Jun 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My battery was replaced, I HAVE THE RADIO CODE , BUT IT DOESN'T TURN ON THE RADIO, MY CLOCK STOPPED, MY CD PLAYER WON'T WORK...WHAT WENT WRONG?


You need to see the dealer for information on the radio code. Also sue O'Reilly auto for improper installation of the new battery.

Mar 20, 2014 | 2002 Mitsubishi Eclipse

2 Answers

Mitsubishi eclipse clock, radio code is 9537, and CD player won't work


You need to see the dealer to sort this out. But ask why they didn't keep the system powered up wnen the battery is replaced, that avoids this problem as no memory or function is lost. Shame on whimever did this battery r and r

Mar 20, 2014 | 2002 Mitsubishi Eclipse

1 Answer

I just resently buy a mits eclipse 1996, radio needs code how can I get it


You need to call dealer and provide your VIN# to get security code.

Mar 08, 2011 | 1996 Mitsubishi Eclipse

1 Answer

My cd player is asking for a code


The code for your cd player should be on a card that was placed inside of the manual in your glove box. You just need to enter this code on your radio. If you can not find the code, remove the trim around the radio and write down the serial number for your radio. If you call up a mitsubishi dealership and tell them you need the radio code for your radio, they should be able to tell you what it is.

Hope this helps! If you need more instructions on how to enter the code after you have it, just let me know.

Mar 18, 2010 | 2002 Mitsubishi Eclipse

1 Answer

Need an unlock code for an infinity radio in my mitsubishi eclipse.............


that radio may plug in but the code gonna be a infinity code the mitsubishi wont accept you need a sony ,jvc ,keenwood or other i have an original radio for the eclipse if you want it and the cd player if your isnt working

Dec 31, 2009 | 2000 Mitsubishi Eclipse

1 Answer

Need to know how to install new radio in a 2001 mitsubishi eclipse


call 1888mitsu2001 and hit option #4, then hit * (star), give them the last 8 digits of your vin and they will provide the code for FREE.

DO NOT PAY FOR THE CODE ONLINE OR GO TO A DEALER (they will also charge).

May 09, 2009 | 2001 Mitsubishi Eclipse

1 Answer

2002 eclipse need security code for radio cd player


u need to remove the interior panel around the cd player and on top of the cd player (infinity in my 2000 eclipse) and there will be sum numbers on the top. i don't remember which set of number u need so write them all down and call a dealer ship in the part dept. and they will *** the information and will be able to give u the code over the phone cuz i had the same problem twice and thats what i did both times. hope this is helpful

Sep 06, 2008 | 2000 Mitsubishi Eclipse

Not finding what you are looking for?
2002 Mitsubishi Eclipse Logo

1,335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...