Question about 2001 Ford F150 Styleside SuperCrew

1 Answer

Air condition/heater any setting for cold air blows cold then hot then cold then hot then blows all hot

Posted by on

  • 12 more comments 
  • Anonymous Mar 14, 2014

    when i turn the heater it blows cold air instead of hot air...

  • Anonymous Mar 14, 2014

    Air con blowing hot not cold

  • Anonymous Mar 17, 2014

    heater is just blowing cold air

  • Anonymous Mar 21, 2014

    heater blowing cold air

  • Anonymous Mar 23, 2014

    I was driving home a few days ago and the heater started blowing hot air even though the dial was set to cold!

  • Anonymous Mar 27, 2014

    how do I solve this

  • Anonymous Mar 27, 2014

    heater blowing cold air

  • Anonymous Mar 27, 2014

    heater will only blow cold air

  • Anonymous Mar 27, 2014

    heater is only blowing cold air

  • Anonymous Mar 27, 2014

    heater is only blowing cold air

  • Anonymous Mar 27, 2014

    when on heat its still cold air

  • Anonymous Mar 28, 2014

    Air conditioning blows hot air

  • Anonymous Mar 28, 2014

    blows hot air constant

  • Anonymous Mar 28, 2014

    Heater will blow, but not hot air, only cold. Not running hot

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 77 Answers

Sounds like the air-conditioning expansion valve is probably not working correctly here is a way you can fix your air conditioning:

  1. Realize that auto AC is basically a refrigerator in a weird layout. It's designed to move heat from one place (the inside of your car) to some other place (the outdoors). While a complete discussion of every specific model and component is well outside the scope of this article, this should give you a start on figuring out what the problem might be and either fixing it yourself or talking intelligently to someone you can pay to fix it.
  1. Become familiar with the major components to auto air conditioning:

  2. the compressor, which compresses and circulates the refrigerant in the system
  • the refrigerant, (on modern cars, usually a substance called R-134a older cars have r-12 freon which is becoming increasingly more expensive and hard to find, and also requires a license to handle) which carries the heat
  • the condenser, which changes the phase of the refrigerant and expels heat removed from the car
  • the expansion valve (or orifice tube in some vehicles), which is somewhat of a nozzle and functions to similtaneously drop the pressure of the refrigerant liquid, meter its flow, and atomize it
  • the evaporator, which transfers heat to the refrigerant from the air blown across it, cooling your car
  • the receiver/dryer, which functions as a filter for the refrigerant/oil, removing moisture and other contaminants
  1. Understand the air conditioning process: The compressor puts the refrigerant under pressure and sends it to the condensing coils. In your car, these coils are generally in front of the radiator. Compressing a gas makes it quite hot. In the condenser, this added heat and the heat the refrigerant picked up in the evaporator is expelled to the air flowing across it from outside the car. When the refrigerant is cooled to its saturation temperature, it will change phase from a gas back into a liquid (this gives off a bundle of heat known as the "latent heat of vaporization"). The liquid then passes through the expansion valve to the evaporator, the coils inside of your car, where it loses pressure that was added to it in the compressor. This causes some of the liquid to change to a low-pressure gas as it cools the remaining liquid. This two-phase mixture enters the evaporator, and the liquid portion of the refrigerant absorbs the heat from the air across the coil and evaporates. Your car's blower circulates air across the cold evaporator and into the interior. The refrigerant goes back through the cycle again and again.
  2. Check to see if all the R-134a leaks out (meaning there's nothing in the loop to carry away heat). Leaks are easy to spot but not easy to fix without pulling things apart. Most auto-supply stores carry a fluorescent dye that can be added to the system to check for leaks, and it will have instructions for use on the can. If there's a bad enough leak, the system will have no pressure in it at all. Find one of the valve-stem-looking things and CAREFULLY (eye protection recommended) poke a pen in there to try to valve off pressure, and if there IS none, that's the problem.
  3. Make sure the compressor is turning. Start the car, turn on the AC and look under the hood. The AC compressor is generally a pumplike thing off to one side with large rubber and steel hoses going to it. It will not have a filler cap on it, but will often have one or two things that look like the valve stems on a bike tire. The pulley on the front of the compressor exists as an outer pulley and an inner hub which turns when an electric clutch is engaged. If the AC is on and the blower is on, but the center of the pulley is not turning, then the compressor's clutch is not engaging. This could be a bad fuse, a wiring problem, a broken AC switch in your dash, or the system could be low on refrigerant (most systems have a low-pressure safety cutout that will disable the compressor if there isn't enough refrigerant in the system).
  4. Look for other things that can go wrong: bad switches, bad fuses, broken wires, broken fan belt (preventing the pump from turning), or seal failure inside the compressor.
  5. Feel for any cooling at all. If the system cools, but not much, it could just be low pressure, and you can top up the refrigerant. Most auto-supply stores will have a kit to refill a system, and it will come with instructions. Do not overfill! Adding more than the recommended amount of refrigerant will NOT improve performance but actually will decrease performance. In fact, the more expensive automated equipment found at nicer shops actually monitors cooling performance real-time as it adds refrigerant, and when the performance begins to decrease it removes refrigerant until the performance peaks again.

Posted on Jun 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger side blows cold air--what part could it be


2001 Chevy Tahoe Heat Problem - Tahoe Forum

www.tahoeforum.com > ... > Technical Discussions
Dec 5, 2008 - 10 posts - ‎7 authors 2001 Tahoe, the front heater blows a little hot air when the car warms up and then blows cold air. The rear heat seems to work fine. I changed ...

Rear AC blows hot air - Tahoe Forum - Chevy Tahoe Forum

www.tahoeforum.com > ... > Technical Discussions

Jul 14, 2008 - 10 posts - ‎5 authors
On my wifes 03' Yukon the rear air conditioning blows hot air no .... Pull the panel off and look at the hot/cold actuator shown in the picture.

Oct 30, 2015 | 2001 Chevrolet Tahoe

2 Answers

My air condition only blows out cold air not hot


Turn your air conditioner OFF and turn your heater ON. Air conditioners were designed to blow out one temperature of air... COLD.

Nov 13, 2014 | 2004 Mercury Grand Marquis

1 Answer

Heater not working


HEATER NOT BLOWING COLD,NO HOT AIR FROM HEATER,A/C BLOWS HOT AIR,A/C NOT BLOWING COLD, COLD AIR FROM HEATER,BLEND DOOR ACUTATOR CLOSED,HVAC UNIT NOT OPERATING,
http://alltypesofpartsreplacing.blogspot.com/2012/12/heater-not-blowing-coldno-hot-air-from.html

Dec 26, 2012 | 2001 Ford Taurus

2 Answers

2006 crown Victoria blows hot air with the air conditioner on the air condition lines are cold under the hood


sounds like the temperature blend door is either jammed or the actuator is shorted ou. when the temperasture control is moved you should hear the door moving...my guess is you are not hearing that..the actuator would be attached to the heater plenum behind dash/glovebox area...becareful to test the correct one as there will be a fresh air actuator and a mode door actuator as well...you can determine which one is which by changing the positions on heater head from hot/col, floor/defrost, recirculate and fresh air settings..each setting will move its designated actuatror..the one not moving would be you temp actuator....have fun!

Jun 29, 2011 | 2006 Ford Crown Victoria

1 Answer

The air conditioning system will only blow cold air. Regardless of the mode, I can only get cold air. Can you give me an idea on how to fix the problem? Thanks Don 615-653-3834 drcamp117@comcast.net


The air conditioning is supposed to blow only cold air. Are you trying to get the heater to blow hot air? Make sure the temperature selector is in the hot position.

Dec 19, 2010 | 2002 Buick LeSabre

3 Answers

Ford ka heater blows hot air all the time


Your problem is a faulty heater control valve. The design used on these vehicles allows for hot water to flow constantly and compete with the evaporator as there is no blender door. You have to replace the valve and possibly the control head. Meanwhile, you can bypass the valve to have cold air

May 31, 2009 | 1999 Ford Taurus

2 Answers

2003 mitsubishi galant es 4cylheater blowing nothing but cold air


This may be a solution:
I had a similar problem at the beginning of this winter.
My heater was blowing cold air.

My solution:
Heater Temperature control cable, about $10 from dealer
Install, about $70, at my local Firestone

Apr 09, 2009 | 2003 Mitsubishi Galant

1 Answer

Ford ka heater blows hot air all the time


Taurus does not use a heater control valve. It runs coolant thru the heater core constantly. You may have a temp blend door actuator problem or a plugged up heater core is also very common. Feel the heater hoses, they should both be very hot, it one is much cooler; you can try to back flush the core.

Mar 26, 2009 | 1999 Ford Taurus

1 Answer

CHRYSLER TOWN & COUNTRY 2003 HEATER PROBLEM


Have you checked the coolant level? If it's low, it will result in diminished heat, and could be the problem.

Mar 20, 2009 | 2003 Chrysler Town & Country

1 Answer

I have a 2000 dodge caravan, no heat


Sounds like the air "blend" door might be inoperable. This door opens and closes a specified amount to regulate the amount of either cooled or heated air, as requested by the climate control unit. If the door is continually in the position which is bypassing the heater core (cold setting), the air will not get warm regardless of the condition/operation of the heater core. I'd suggest having this component checked.

Nov 27, 2008 | 2000 Dodge Caravan

Not finding what you are looking for?
2001 Ford F150 Styleside SuperCrew Logo

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...