Question about 2005 Infiniti FX35

1 Answer

Battery replacement diagram

Does anyone have a diagram that shows how to take the battery out of an FX-35. I am just wondering how much of the "cover" I need to take out to replace the battery. I let the battery run low on water and need to replace.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Two covers need to be removed and then the battery, its hard to get out and in becarefull and take your time.

Posted on Jun 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side door on infiniti fx35 doesn't unlock...


You maybe need to replace the battery in your remote. Most of them are available at any parts store.

Mar 11, 2013 | Cars & Trucks

2 Answers

What size battery is needed for an infiniti fx 35?


A 35 series battery with at least 500 cold cranking amps.

Oct 31, 2010 | 2003 Infiniti FX35

1 Answer

Battery replacment procedure- 2004 infinity fx 35


Get the replacement battery, remove the Negative terminal, then the Positive terminal, then the battery hold down clamps. Remove the battery and reverse the procedure to install the new battery.

Oct 09, 2010 | 2004 Infiniti FX35

2 Answers

How to remove starter


Removal & Installation - Starter
  1. Before servicing the vehicle.
  2. Remove or disconnect the following:
    Negative battery cable Radiator air baffle assembly
    Electrical connections Torque converter cover Starter
To install:
  1. Install or connect the following:
    Starter. Torque the bolts to 35 ft. lbs. (47 Nm). Torque converter cover Solenoid -BAT- terminal. Torque the nut to 89 inch lbs. (10 Nm). Solenoid -S- terminal. Torque the nut to 27 inch lbs. (3 Nm). Radiator air baffle assembly Negative battery cable
  2. Perform a charging system test and verify the starter is operating properly
8e0154d.jpg

Fig. Showing the starter motor location and electrical connections
  1. Before servicing the vehicle.
  2. Remove or disconnect the following:
    Negative battery cable Radiator air baffle, for clearance if necessary Flywheel inspection cover bolts Flywheel inspection cover Electrical connections from the starter motor Starter motor mounting bolts Starter motor
To install:
  1. Install or connect the following:
    NOTE Before installing the starter motor to the engine, tighten the nut next to the cap on the solenoid BAT terminal. If this terminal is not tight in the solenoid cap, the cap may be damaged during installation of electrical connections and cause the starter motor to fail later.

    Starter motor Starter motor mounting bolts and tighten the bolts to 30 ft. lbs. (40 Nm) Electrical connection to the battery terminal on the solenoid and tighten the battery terminal nut to 13 ft. lbs. (17 Nm) Electrical connections to the S terminal on the solenoid and tighten solenoid S terminal nut to 27 inch lbs. (3 Nm) Flywheel inspection cover Flywheel inspection cover bolts Radiator air baffle, if removed
  2. Connect the negative battery cable

Hope helps, remember rated this.

Aug 12, 2010 | 2001 Pontiac Montana

1 Answer

Diagram showing how to remove battery from a 2000 chrysler 300m


there wont be a diagram for that. if there is a bar or cover in the way, you will need to remove it and set it aside. then use wrenches to loosen the cable clamps and move them aside. lift the battery out of the car, replace it and then replace anything you had to move .

Jul 31, 2010 | 2001 Chrysler 300M

1 Answer

The battery went dead and after jump starting the


Reboot - just disconnect the battery + cable for a few minutes and reconnect. This should restore all default settings.

Aug 02, 2009 | 2005 Infiniti FX35

1 Answer

Can not jump start my Infiniti FX 35 2007


need clarification: car will not crank? When not cranking you attempt to jump start it and still will not crank? If is is correct, do the accessores (ie,headlights,radio,wipers,etc.) work normally when you try this? If so it may be a starting, security system problerm. If the accessories are weak when attempting this then (1)verify clean and tight battery connections, (2)verify jumper wire connections, (3)if all this is good and battery is still not jumping then you will need to charge the battery. if battery will not charge, remove it and have it tested at a parts store(most parts stores will do this for FREE). Replace battery if necessary-then verify normal charging and that there is no accessory draw

Thanks,

Mar 02, 2009 | 2004 Infiniti FX45

1 Answer

Repair


disconnect the battery for 5 minutes, be advised if this fault is not repaired the light will come back on

Oct 23, 2008 | 2004 Infiniti FX35

1 Answer

88 s10 wiring problem


if you have a 4.3 liter the wire from the positive post on the battery should go to starter and to the post with 10mm nut on the back of the alternator with a 2nd wire that goes to your ignition coil. ignition coil wire should have a fusible link in the line.

Sep 16, 2008 | 1988 Chevrolet S-10

1 Answer

Electrical Question for '88 S-10


in my 88 s-10, it goes directly from the battery to the post on the back of the alt.

Sep 16, 2008 | 1988 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

621 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

63576 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13213 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...