Question about 1999 Volvo S80

1 Answer

Central locking system

The keyless remote is not working. Using the key worked when I bought the car. Now the key will not lock/unlock the car, nor the gas cap. I checked the small fuses, where can I get info on the large ones?

Posted by on

1 Answer

I have recently had this problem I believe this to has been caused by a fault in the drivers door lock assembly It seems this contains the remote receiver. In my case I think there had been some radio interference being the main cause. The remote system seems to be working OK, The door lock will still not operate with the key.
Remove and replace the fuse 25 resetting the ignition module. Starting the engine, switch off remove the key from the ignition, stay in the car lock the doors using the door button, press and hold the remote unlock button for approx 5 seconds, listen to see if you can hear the clicking of the door receiver when you press the remote buttons. Press and hold lock/unlock button. You may be lucky.

Posted on Jun 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Back doors locked shut. how do i open them.central locking innoperative


Use the key fob to open the rear doors by pressing the unlock function twice. If you need reprogramming instructions, use the following:

2002 Focus

  1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
  2. Turn the ignition OFF. The system will chime to confirm programming mode.
  3. Within 20 seconds, press any button on first keyless remote. The system will chime once to confirm programming.
  4. Within 20 seconds, press any button on second keyless remote. System will chime once to confirm programming.
  5. Turn ignition to RUN to exit programming mode.

Mar 29, 2014 | 2000 Ford Focus

1 Answer

1997 toyota corolla drivers door lock not working...


http://www.manualowl.com Hope this helps! Jimmy

Apr 10, 2012 | 1997 Toyota Corolla

1 Answer

Central locking will not work on remote key.


unlock car with key/hold over for 30 secs then lock car with key/hold over for 30 secs then unlock with remote hold button down for 30 secs.this should reset system.

Apr 28, 2010 | 1998 Audi A4

1 Answer

I have an 1999 vw beetle and we had to change the battery and the keyless enter doesnt work and now the alarm system has been reset and we cant start the car it there anything we can do


lock the car and hold key over for 30 secs then press/hold unlock button on remote for 30 secs,this should reset your keyless entry/alarm/central locking.

Apr 18, 2010 | 1999 Volkswagen Beetle

2 Answers

2002 bmw 530i key does not (remotely) unlock doors or trunk but they work fine manually.


Unlock vehicle. Enter vehicle. Close driver's door. Switch ignition ON and OFF. Remove ignition key. Press and hold unlock button. Press lock button briefly 3 times within 10 seconds keeping unlock button depressed. Release unlock button. Some models: LED flashes slowly for 10 seconds. Some models: Central locking system locks and unlocks rapidly to indicate correct programming. Repeat above procedure if central locking system does not work and LED does not flash or LED flashes continuously.

Mar 09, 2010 | 2002 BMW 5 Series

1 Answer

Can not lock car by key remote . toyota rav 4 53 plate


If your car has an alarm with a separate remote, it is a separate system and it is probably self-arming. When you lock the doors with the key central lock, the alarm gets armed by the RAV4 being OFF and the door locking action. When you unlock the doors with the key, the alarm is still armed because the key is not comunicating with the alarm just the cars factory keyless system.

Mar 19, 2009 | 2008 Toyota RAV4

1 Answer

Need of programming instructions for keyless entry for 1996 LHS


System operation
System will automatically lock all doors when vehicle is driven in excess of 15 mph
Pressing UNLOCK (on remote) once deactivates system and unlocks driver door only
Pressing UNLOCK (on remote) twice w/in 5 seconds deactivates system and unlocks all doors
Alarm/central locking functions can be altered using remote transmitter


Programming

Access data link connector (DLC)- druvers sude fascia
Switch ignition on
Jump DLC terminal 1 and ground
Ensure doors lock and unlock, indicating programming mode active
Press any button of each remote to be programmed
Ensure doors lock and unlock after each remote operation - indicating programming complete
Remove jump lead to exit programmming code

A maximum of two remotes can be programmed

Jan 20, 2009 | 1997 Chrysler LHS

1 Answer

Keyless remote


Disconnect the battery from your car (negative cable only) overnight. Make sure you have your radio reset code before doing so.

Then reconnect after 10 hours, and make sure you have remote handy as alarm may go off. Then if that doesnt fix it, go to driver door, then insert master key, pull up on handle first all the way and hold it. Then turn the key slowly all the way so the doors unlock and continue turning the key. This will reset the central locking system as yours may have gotton stuck. then remove key let go of handle, open door and try to lock and unlock doors from switch inside car.

Then try remote. It should work, this is what the dealer will do and charge you about $350...if it doesnt work order a new remote b/c yours may have become damaged by liquid or dropping?

Have a great day,

Thanks,

Mark

Dec 30, 2008 | 1998 BMW Z3 Roadster

Not finding what you are looking for?
1999 Volvo S80 Logo

804 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Mark Jones

Level 2 Expert

76 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...