Question about 1994 Land Rover Discovery

2 Answers

Discovery land rover will not fire.

Getting ligths and other power, but car will not fire. Getting a spark from the plugs, which incidently are fairly new. Replaced fuel filter with new one and cleaned out petrol to ensure no blockage - still will not start

Have looked for the path of the fuel line so i can fully check. Can spot it when i look under the vehicle, but cannot find under the bonnet

Posted by on

  • Sew_can_i_2 Jun 23, 2008

    Had the same problem and replaced the cap and rotor.

    That made it possible to start at all, but it was not good enough,

    so we cleaned the throttle body, that helped but it's still not starting

    clean. Too much time on the starter.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

Aply carburetor cleaner to intake while some one crak it, if you can keep it runing with carburetor cleaner then fuel pump is not good

Posted on Jun 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Land Rover Master
  • 1,224 Answers

Try taking the air cleaner assembly off you might not be getting enough air to engine
if this is the case then the throttle body needs to be maintenanced

heres another suggestion it just hasnt sucked gas to the engine to crank over sometimes they help

go out buy an electric fuel pump
find the fuel inlet source to engine hook up electric fuel pump
attach only ground to something in engine compartment
then get a can so that when gas comes out it has something to go into
tap the electric fuel pump power lead to the positive of battery let run till gas comes out make sure not to spark your working with gas
once gas becomes present detach electric fuel pump all the way set aside
hook gas line back to port and then start vehicle this should start

also with fuel filters there are 3 on a vehicle
one in engine compartment
one on chassis back by the tank
and one in the tank called the sending unit this has a filter in the tank this one could be clogged
make sure these filters are in the right position with gas flow flowing in right direction

Posted on Jun 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

02 land rover discovery turns over but wont start


OTHER THAN A MECHANICAL PROBLEM THERE ARE 2 THINGS THAT KEEP YOUR CAR FROM RUNNING, 1 No Spark, 2 No fuel. To check fuel open the air intake and squirt a little fuel into the air intake if the car starts or at least fires you probably have a loss of fuel.. The spark problem, You need to find out if the spark plugs are firing.. if they are not firing the car will not start.. THEN YOU MUST FIND OUT WHY THERE IS NO FUEL OR NO SPARK, BUT FIRST Isolate the system THAT IS NOT functioning.


Mar 07, 2014 | 2002 Land Rover Discovery Series II

1 Answer

Hi i have Land Rover Discovery 3 model is 1996 V8 engine 3.9 Gasoline. Engine is cranking but not starting when i check Spark Plugs it comes vet, i have check timing and firing order i think firing order...


Attached is link to Rave Manuals (Rover Bible) BTW yours is listed as Discovery (not 3 if it's 1996) These have exploded wiring diagrams & pics - http://www.landroverresource.com/

Apr 07, 2011 | Land Rover Discovery Cars & Trucks

1 Answer

As I accelerate my 2000 Discovery II Landrover, I get a vibration. It is not all the time, only at certain speeds... Is this a transmission problem or could it be simply spark plug/wire's mis firing? Can...


It may be your tires, either a weight has come off or the belts are starting to seperate. I am sure if you took it to a tire shop they could check them out for you. Usually, if it is a miss fire your engine check light will light. As far as replacing the plugs and wires it is fairly simple as long as you have the right tools and do one at a time it is possible to do it yourself. Hope this helped Tim

Aug 15, 2010 | 2000 Land Rover Discovery

1 Answer

I need a diagram of the firing order for spark plug coil, landrover discovery 2002


2002 Land Rover Discovery II 4.0 liter V-8

67710da.gif

Hope this helps (remember rated this).

Jul 07, 2010 | 2002 Land Rover Discovery Series II

1 Answer

1999 Land Rover Discovery II engine miss


Observe the engine running in the dark to see if there are any spark jumps from the wires or coil, you may have a carbon track.....

Feb 16, 2010 | 2001 Land Rover Discovery Series II

1 Answer

Engine is not running after spark plugs and cables changed.


I assume it was running before you changed the plugs and wires, verify you didnt disconnect accidently another wire such as a crank position sensor or an oxygen sensor on or near exhaust manifold
also check the wire firing order make sure that is correct...

Jan 31, 2010 | 1999 Land Rover Discovery

1 Answer

I need the 2000 land rover discovery II spark plug gap settings


http://carservicemanuals.blogspot.com/2008/06/range-rover-discovery-ii-defender.html

GL

Mar 18, 2009 | 2000 Land Rover Discovery

2 Answers

Land Rover Discovery 2 Spark plug diagram needed.


This is your best choice.Here is a diagram attached.023c4c3.jpg

Dec 10, 2008 | 1999 Land Rover Discovery

Not finding what you are looking for?
1994 Land Rover Discovery Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...