How can i reset maintenance light on my nissan altima 2009 i just chanfe the oil. so can u please help me to reset the light thx.

Reset Oil Maintenance Light on 2007-2012 Nissan Altima:

1. Turn ignition switch to ON position but do not start the engine.
2. There are 2 square buttons on the dash, push the left one (ENTER button) until the "Setting" mode is displayed.
3. Enter the Setting mode by pressing the right one (NEXT button)
4. Highlight the Maintenance option and select it by push the ENTER button.

Hi! Please refer to the following link! You will find ANYTHING you want there, I guess! Please report back and tell us if this helped!


http://www.nicoclub.com/FSM/Altima/2009

probably means that the fault codes should be read and that the vehicle is due for a service.

To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.

Please mark my answer helpful.

According to Nissan owners club online - - -
There are 2 square buttons on the dash, to the left of the steering wheel. Push the left one to get to the maintenance screen and push the right one to change the "oil", "oil filter", or tire schedules. Don't worry about "other".
To reset, highlight the number and just hit "back", to reset it automatically. It takes a while but you'll figure it out.

You need to reset your ECM "computer" Do this by turning your key to on position with your a/c to on and remove positive battery cable. Wait 30 sec. then turn off key and replace battery cable, Good luck to ya.

To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.

Nissan/Infiniti
Owners of many late-model Nissan and Infiniti vehicles have the unique privilege of actually setting the interval at which they would like to be alerted about changing oil. To do so:
1. Push the "MAINT" button on the main menu.
2. Select "Engine Oil" and push Enter.
3. Select "Maintenance Schedule" and push joystick right or left to select desired mileage.
4. To reset maintenance interval, select "Reset" and push Enter.
To reset the maintenance reminder, follow this procedure:
1. Push the "MAINT" button for more than 1.5 seconds.

To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button

Hi, I'm a DIY guy, but I don't know how to reset the oil maintenance light that came ON on my 2010 Altima. I had it service at the dealer and won't tell me how to reset it. Thanks