Question about 1997 Mercury Villager

2 Answers

Mercury villager brakes pads

Need to replace the pads and shoes on 1997 mercury villager, but am now living and driving this car here in england.

anyone know if these pads are used on other cars as this make and model was never marketed here so local spare shops do not carry parts for it.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

You can buy them on EBay and have them shipped to you. Try to get a name brand like Bosch, Ford, Kelsey Hayes, Nissan (Quest is same vehicle). Cheap ones make noise & don't last long.
search on ebay motors and type in villager quest bakes.

Posted on Jan 09, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Mercury Master
  • 1,224 Answers

Not off hand but you can order the parts threw any checker autozone napa automotive store they have stores across the world
also you can order threw any dealership in england threw there parts department even if the dealer is not of your manufactured vehicle name

Posted on Jun 04, 2008

  • Christophe Thompson
    Christophe Thompson Jun 04, 2008

    you dont want to get miss matched parts on your vehicle

    if you have a computer its easier to order right parts online

    mercury is a product of ford and ford dealerships

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i replace the front brakes on my van?


I would say to ask for a video DVD for that repair and it is available at some autoparts stores. You might try a Websearch for Videos shown by some mechanics sites. Some are free.

I say this because there is the potential for an accident from driving an improperly repaired vehicle. Also since the vehicle must be jacked up off the ground, there is potential danger from that.

The brakelines must also be bled and the rotors taken in for measurement. Retaining clips for the brake pads and tricks to compressing the brake calipers add to the need for a few special tools.

I recommend watching a repair being done first.

Mar 15, 2014 | 1998 Mercury Villager

1 Answer

Brakes


usually when this happens its caused by the caliber being push beyond its normale operating range or contaminated brake fluid. you should change the brake caliper and flush the brake lines with brake cleaner then bleed the system with new brake fluid

Jun 04, 2012 | 1997 Mercury Villager

1 Answer

I have a 95 Villager with Anti Lock Brakes. I replaced the Pads, Calipers, Shoes and Front Brake lines. I bled the brakes according to the repair manual but, the brake light is on and the pedal still goes...


The brake bleed may not have been successful. Always bleed the right rear brake first then the left. Next the front right and then the left. If you are using someone to work the brake pedal make sure they hold it down until you have closed the bleed nipple. Make sure you use a little hose on the nipple and into a jar with fluid in it to watch for the bubbles to stop. Make sure the master cylinder always has enough fluid in it.
There is a brake bleeding kit that can be bought, this makes the job a lot easier.

Oct 07, 2011 | 1995 Mercury Villager

1 Answer

I am replacing the rear brakes does any one have a drawing for this


I just find this (click over this link for zoom)...

9_30_2011_3_42_10_pm.jpg

Fig. Exploded view of the rear drum brake assembly - LINK
The rear brakes do not require manual adjustment. Adjust the shoes by sharply applying the brake pedal several times while driving the vehicle alternately forwards and backwards. Check the brake operation by making several stops while driving forward. The self-adjusting mechanism will sufficiently adjust the rear brake shoes without any manual tightening at the brake shoe adjuster. If the rear brake shoes are manually adjusted, the additional action of the brake shoe adjuster can cause the brakes to become over-tightened and result in binding or overheated rear brakes.

Hope this helps.

Sep 30, 2011 | 1998 Mercury Villager

1 Answer

I need to know what size hex or allen wrench is needed to remove the front disc brake pads ,on a 1995 mercury villager.Thanks ! Jerry


I'm guessing 7 mm torx from factory, but some are hex after calipers are replaced. Maybe 8 mm hex.

Jan 21, 2010 | 1995 Mercury Villager

1 Answer

I have a 1997 mercury sable it was running fine till i got it back out the shop, it will run go in to gear but when i brake there is this grinding noise it was a little noise but now its gotten worse does...


have your brakes check. the type of noise that you are hearing is common when the brake pads or shoes are worn so much that metal on the pads or shoes is grinding into the rotors or drums

Jun 13, 2009 | 2003 Mercury Sable

1 Answer

Brakes rear


raise the vehicle and check the rear wheel bearings,spin the wheel while putting your hand on the rear axle you should feel the noise or check for play or movement in the rear bearing. hope this helps,please rate my fix

Mar 19, 2009 | 1999 Mercury Villager

Not finding what you are looking for?
1997 Mercury Villager Logo

Related Topics:

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...