Question about 2006 GMC Sierra

1 Answer

Gmc 2006 sierra

I've read the manual from cover to cover. Lights were left on and the battery died. Now I can't set my clock for the right hour. How do I set my clock. I have the XM feature also.
And just to make sure....I called GMC to find out how large my gas tank is and he said he 'thought' it was 31 gallons.
Correct?
Thanks!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 372 Answers

31 sounds about right for a sierra and the clock settings are in the menu. Hit menu then you have a small round knob to advance the hour or you have two small buttons in the lower right hand corner of the radio.

Posted on Aug 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant set my clock on chevrolet trailblazer


disconnect the battery and wait for the clock to show the right time then re-connect the battery if you cannot find the knobs ,how about the trip meter knob and try turning it gently to the left or the right to adjust the time

Nov 27, 2013 | 2005 Chevrolet Trailblazer Ext

1 Answer

2007 is250 battery died, then was fully chared, now the car isn't detecting the key and won't start


all new cars are set up that if the battery deads it goes into lockout mode. it is so the dealer ships can make money

Dec 16, 2012 | 2007 Lexus IS 250

1 Answer

How do I set clock on a 2006 Pt Cruiser. I hold the time button down and can set hour but can't set minutes.


Clock Setting Procedure (digital clock page 242 of your owners manual)
1. Press and hold the time button until the hours blink.
2. Adjust the hours by turning the right side Tune/
Audio control.
3. After the hours are adjusted, press the right side
Tune/Audio control to set the minutes. The minutes will
begin to blink.
4. Adjust the minutes using the right side Tune/Audio
control.
5. To exit, press any button/knob or wait 5 seconds.

SETTING THE ANALOG CLOCK (page 238 of your owners manual)
To set the analog clock at the top center of the instrument
panel, press and hold the button until the setting is
correct. The clock will adjust slowly at first and then
quicker the longer the button is held.

Jan 26, 2011 | Chrysler PT Cruiser Cars & Trucks

3 Answers

How do I set my Analog clock in my 1996 Audi A6 Quatro wagan


Pull out the left most knob on the dash that controls the dash lights, turn to the right or the left.

Oct 12, 2010 | 1996 Audi A6

1 Answer

This car has an electrical problem. When you turn hard left the idiot lights on the dash all light up....you must turn the car off and restart it and everything is back to normal. Well now it seems...


check to make sure your battery is bolted down securely and its possible that when you throw it hard left its moving around and you"ve loosened the battery cables.

Apr 30, 2010 | 2002 Pontiac Grand Am

1 Answer

Changed car batery, now i need to reset the clock.


press the set button and use the seek and scan buttons to change time

Press the volume control knob and hold down. Press the seek button left to set hour, press right to set minutes.

Hold the clock button, and use seek left and right. Left <- (Hours) & Right -> (Minutes)

Depending on what radio you have ONE of these will work.

Jan 15, 2010 | 1991 Ford Escort

1 Answer

Radio does not work. Cannot set clock. Door open


There is an anti-theft system tied into your radio. When the battery goes dead, you have to reset your radio with a code. there is a code in your manual that has to be typed in. If you don't have the manual, go to the dealer. They will find the code, for free. Then, look in the manual. You have to type in the code, then hit a button or two, then the radio will come right back on. then you can reset the clock too.

Dec 28, 2009 | 2006 Honda CR-V

1 Answer

Trying to set time after battery died, not shown in manuel correctly


Usually on older AC-Delco/Remy Radio, press the "set" button and it will take you back to the radio station frequency, then push the left knob inward, then it will take you back to the time again. Before the "set" mode ceases, use the seek and scan buttons to change the minute and hour for the time, until you get to the time you want.


Other models will have the "set" button being a small almost hidden button, you can use a paper clip pin end to depress. Which will initiate the "set" mode, then you can push in the left or right knobs and the time mode will come on. Then using seek rocker switch or the seek and scan buttons the time minutes and hours will start to change.


The last type is where you have to either hold down the set button then use the seek and scan buttons or you have to hold down the set button for about 4 seconds then the clock will go into a blinking or set display mode, for which you can use either the knobs or the seek and scan buttons to produce minute and hour change display on your clock.



Try these methods. I know on older GM vehicles with AC Delco/Remy type radios/stereos, usually there is a "set" button for setting your favorite radio stations to instant numbered buttons, usually up to four or five of them. This same "set" button can be used to set the time. But when you hit the "set" button it will take you to the radio station frequency, not the time. That is when you press in the left knob or sometimes the right knob, and the time display will come on, while it is still in the set mode. Then you can press on the seek and scan buttons, one of them will change your minutes the other one will change your hours, for your clock display time. When you reach the correct time you desire, then hit the "set" button again, which will turn off the set mode. Your clock should start working normally, starting from the time you've set


Aug 23, 2009 | 2004 Pontiac Grand Am

1 Answer

Clock


If the radio and clock is the original equipment then here is how to set the clock.

1. Turn the radio on

2. Press and hold in the on/off-volume-clock control

3. While holding the on/off-volume-clock button in, press the left(-) side of the "TUNE" button to advance the hours and the right (+) side to advance the minutes.

Note: The clock displays 12-hour time with no A.M. /P.M. indications

These instructions come from the Electronic Sound Systems manual that I have with my van. Hope this helps.

Oct 17, 2008 | 1994 Ford Aerostar Extended

Not finding what you are looking for?
2006 GMC Sierra Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74418 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...