Question about 2000 Ford Escort

2 Answers

How do I replace a camshaft position sensor on a 2000 ford escort?

Posted by on

  • 7 more comments 
  • yadayada
    yadayada May 11, 2010

    What engine do you have?

  • Anonymous Mar 12, 2014

    replace camshaft position sensor in 2006 ford expedition

  • Anonymous Mar 12, 2014

    replace camshaft position sensor in 2006 ford expedition

  • Anonymous Mar 12, 2014

    replace camshaft position sensor in 2006 ford expedition

  • Anonymous Mar 16, 2014

    I replaced the speed sensor in my 2000 ford escort zx2 s/r and it worked than quit

  • Anonymous Mar 16, 2014

    where is the camshaft position sensor

  • Anonymous Mar 23, 2014

    where is the camshaft position sensor

  • Anonymous Mar 26, 2014

    how to replace it?

  • Anonymous Mar 28, 2014

    how do I replace a crank position sensor on a 2004 Ford Focus

×

2 Answers

Bullshits, the CMP sensor is near the 4 injector, you have to take out all the electric conector near injector 4, take out the 2 screws that hold the fuel rail, sometimes you have to take out the 4 injector for the space, then take out the screws that hold the CMP, lub the o´ring of the new one and reverse this steps.

Posted on Oct 01, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 74 Answers

2.0 cam position senser is on top front of engine near coil pack probably not problem though most of time its a timing issue idler pulley or tensioner and belt.

Posted on Sep 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Troubleshoot crank position sensor location


For testing crank sensor,check the help link below:---How to test Crankshaft Position Sensor? http://fordrepairhelp.blogspot.in/2012/03/how-to-test-ford-focus-crankshaft.html
----------

How to test Crankshaft Position CKP Sensor?

---------------
Crankshaft Position Sensor Operation?

----------------
Replace Camshaft position sensor and Crankshaft Position Sensor? http://technoanswers.blogspot.in/2012/06/2005-dodge-durango-replace-camshaft.html
----------
GMC Crankshaft Position (CKP) Sensor Replacing? http://schematicsdiagram.blogspot.com/2011/12/gmc-crankshaft-position-ckp-sensor.html

------------
These details will help.
Thanks.

Nov 25, 2012 | 2000 Cadillac Escalade

1 Answer

I have 2000 ford focus im working on and I had code po340. so I replaced the cam and crank sensor. It still pops threw the air intake and dies when put in gear. Timming belt is newer and still in time


A code P0340 could mean one or more of the following has happened:
  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed

With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required

Sep 05, 2011 | 2000 Ford Focus

1 Answer

To locate the camshaft position sensor for a 2000 ford escort


I recommend you contact a Ford Service Department

Feb 09, 2011 | 2004 Hyundai Santa Fe

2 Answers

Location of cam and crank position sensors


The cam sensor is located at the front right front side of the cylinter head, while you are facing the engine.---------- The crank position sensor located below the pcv valve that is located on block not the valve cover, its below the exhaust manifold. You will have to remove the catalytic converter to see the exact view of both the sensors. The camshaft sensor is on the head. The crankshaft sensor is in the block, just below the exhaust manifold. ------------ Thanks.Helpmech.

Nov 12, 2010 | 2001 Ford Escort ZX2

3 Answers

Where is the Camshaft Position Sensor located on a


this car has but one bank, the cam sensor is under the intake manifiold on the drivers side.

Feb 25, 2010 | 1998 Ford Escort

1 Answer

How to find thermostat in 2000 ford escort


Fig. The bolt location for the water thermostat

48593ff.jpg

- Disconnect the battery ground cable.
- Drain the engine coolant to a point below the water thermostat.
- Disconnect the connector from the camshaft position sensor.
- Remove the bolts and move to one side the water hose connection.
- Remove the water thermostat and seal from the water thermostat housing.

For 2.0L DOHC ZETEC ENGINE & 2.0L SOHC SPI ENGINE

Hope helps (remember rated this help) Good luck.

Jan 04, 2010 | 2000 Ford Escort

1 Answer

On my 99' escort i have an engine code po340 does that mean i just replace the sensor and it will be ok? also where is the sensor located?


This is a camshaft position sensor and it is located on the driver side back side of the engine.This should fix your problem ,also have autozone turn your light of for you :)

Aug 21, 2009 | 1999 Ford Escort

1 Answer

Check engine light will not turn off '99 Ford zx2


Looks like you have tried everything to turn off the check engine light. However, did you find out the error code for this? Until you resolve the issue, the light will keep coming back. You need to get diagnostics done

You can save some money by checking a new website http://prundo.com/ for free coupons for check engine light!

Mar 11, 2009 | 2000 Ford Escort

1 Answer

Camshaft positioning sensor


back top left side of rocker cover

Jan 08, 2009 | 2000 Ford Escort

Not finding what you are looking for?
2000 Ford Escort Logo

Related Topics:

646 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...