Hi,
Hi Chamer,
Could be sticking exhaust valves. This sounds like like what you
describe and it does rob you of power without generating lots of heat.
For Series II Disco's, this is a common problem and requires a valve
job to repair. Also can return after every 50,000 miles, depending on
how you drive, where you drive and what fuel you purchase. Use the
highest Octane you can find (94 at Sunoco). Better for your Disco and
the environment too!
Regarding brake work, I use Raybestos on my Series I. No complaints.
The series II has wider rotors (lucky you) so you'll have to see if
Raybestos carries them. Vented rotors are better - allowing to cool
down faster and better stopping ability. If money was a concern, do
the brakes yourself! A valve job will run you about $2000US and a
complete brake job (at the dealer) will probably be the same. $4000 is
too much for me to handle in one bite!
If you do the brakes yourself, expect the following approximate costs:
pads $100(fr&bk); rotors $100 each, $15 brake fluid (perform a
complete flush); plus your time (0$).
Check around online for the best prices and locations. There are ways of saving and this is one of website I use often:
(
http://www.greatautoparts.com)
I found vented rotors for your Disco for $69. Far less than the $300 from your dealer.
Hope i helped.
Thanks.
×