Question about 1997 Oldsmobile Bravada

Open Question

Olds bravada 1997

When ignition switch is off key removed buzzer stays on have to remove fuse to shut off.

Posted by on

3 Suggested Answers

  • 1 Answer

SOURCE: 97 bravada steering pump leak

you need to get a special power steering pump pulley removal tool. you can rent it from orielly auto parts for about thirty bucks

Posted on Mar 04, 2009

  • 14036 Answers

SOURCE: 2000 olds bravada. headlights and taillamps stay

PROBLEM COULD BE THE AUTOMATIC LAMP CONTROL RELAY OR FAULT IN THE BODY CONTROL MODULE.

Posted on May 05, 2010

  • 14036 Answers

SOURCE: 2000 olds bravada, radio would not hold memory, Pulled Rdo Mem fuses and was corroded, replaced fuse, holds memory now but radio will not shut off after key is out of ignition and doors closed

let dealership check out radio,radio program need to be reset.

Posted on Dec 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove ignition key lock cylinder. when my key will not turn ingnition?


remove the plastic bowl around steering column to gain access around switch and u should see like tab u can press on the switch with a screw driver

Feb 26, 2015 | 1997 Oldsmobile Bravada

1 Answer

Key stays in the position just after you shut the motor off. It will not allow me to remove the key or return to neutral position on coloumn.


Had same problem - was the ignition switch inside the column - the switch part - not the key and tumblers - total pain with out a ton of tools and patience - part was 60$ from autozone

Aug 18, 2010 | 1999 Oldsmobile Bravada

2 Answers

How do you remove the ignition switch part to replace


FIRST OF ALL TURN OFF RADIO TO KEEP FROM LOCKING IT OUT.THEN DISABLE AIRBAG.DISCONNECT NEGATIVE BATTERY CABLE.WAIT 20 MINUTES.MAKE SURE TURN THE STEERING WHEEL SO THAT BOTH WHEELS POINTING STRAIGHT AHEAD.TURN IGNITION SWITCH TO LOCK THEN REMOVE KEY.TO REPLACE THE IGNITION SWITCH.REMOVE THE INSTRUMENT CLUSTER.REMOVE THE 2 SCREWS SECURING THE IGNITION SWITCH.PUSH SWITCH 1 INCH STRAIGHT BACK TO CLEAR THE MOUNTING BRACKET THEN LIFT OUT.TO REMOVE LOCK CYLINDER PUT KEY IN SWITCH TURN TO RUN POSITION THEN DEPRESS THE PIN WITHDRAW THE LOCK CYLINDER.

Jun 30, 2010 | 1999 Oldsmobile Alero

1 Answer

2000 Olds Bravada Key operates all electrics but will not turn ignition Could key be faulty


ignition switch has a anti-theft type lockout in the electronic switch inside steering column - have also had mine do this due to bad connection at the battery - remove both battery bolts and clean terminal and make sure you have a good connection - have also had my starter go out and does same thing - all lights and electronics but no start - had all 3 of these on my bravada in one week!!

Jun 01, 2010 | 2000 Oldsmobile Bravada

1 Answer

2000 olds bravada. headlights and taillamps stay on after ignition is shut off and key is removed.


PROBLEM COULD BE THE AUTOMATIC LAMP CONTROL RELAY OR FAULT IN THE BODY CONTROL MODULE.

May 05, 2010 | 2000 Oldsmobile Bravada

1 Answer

1992 pontiac grand prix le interior lights and key buzzer wont go


inside the steering column locate the ignition remove wire to reveal screw to remove ignition that wire is what controls the buzzer and light itthe wire probrally wasnt in place correctly wich caused your problem

Apr 27, 2009 | 1992 Pontiac Grand Prix

2 Answers

How to get key out that is stuck in ignition


Remove steering column shroud(cover)and tap ignition barrel with small hammer while twisting key backwards and forwards,also turn steering wheel backwards and forwards sometimes this is enough to release key as the locking pins in barrel and the steering lock pin do sometimes jam.You will have to remove steering column shroud to replace ignition barrel if tapping/hitting it doesnt work anyway so its not a wasted effort.Good luck,let me know how it works out

Nov 12, 2008 | 2003 Oldsmobile Bravada

3 Answers

Key stuck in ignition


Under the steering column is an access plug. Remove the plug and insert a small shaft driver into the hole and push up gently, the key will release.

Oct 17, 2008 | 1997 Oldsmobile Bravada

Not finding what you are looking for?
1997 Oldsmobile Bravada Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...