Question about 2002 Hyundai Santa Fe

1 Answer

ABS AND TCS LIGHT FLASHES ON AND OFF FROM TIME TO TIME.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 8,215 Answers

Please see my tip at http://www.fixya.com/cars/r6003525-abs_traction_control_lights . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Oct 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ABS light come on when i am towing


the tcs system is detecting the weight and sway of the trailer because the load on the hitch is too much- that's the simple answer.

The ABS and TCS work together - the ABS system is what detects wheel spin and tell the TCS which diverts and/or control power.

Oct 08, 2014 | 2008 Mazda MAZDA6

1 Answer

Light abs traction control stays 1998 buick park avenue


PRE-DIAGNOSTIC INSPECTIONBefore diagnosing ABS/TCS, perform a comprehensive visual inspection of system as follows.Check ABS/TCS wiring harness connectors for looseness. Check harness routing; pay particular attention to wheel speed sensor wiring harness routing. Check fuses No. 1D, 5B and 6B in instrument panel fuse block. Check fuses No. 1 and 2 in underhood fuse block. Check brake fluid level in master cylinder reservoir. Check brake fluid level in Pressure Modulator Valve (PMV) assembly reservoir. Ensure parking brake is fully released. Ensure parking brake switch is functioning properly. Always perform ABS/TCS system functional check before using DIAGNOSTIC CODE CHARTSThe EBCM/EBTCM has self-diagnostic capability, which can detect system failures. Fault codes stored by EBCM/EBTCM can be displayed using Tech 1 scan tester. There are no provisions for flash code diagnostics.Begin ABS/TCS diagnosis with PRE-DIAGNOSTIC INSPECTION procedure. If failures are found during pre-diagnostic inspection, perform necessary repairs, and proceed with ABS/TCS FUNCTIONAL CHECK. See Fig. 5 .If no failures are found during pre-diagnostic inspection, go to ABS/TCS FUNCTIONAL CHECK. See Fig. 5 . The ABS/TCS FUNCTIONAL CHECK will either indicate ABS/TCS is functioning properly or direct technician to various diagnostic procedures such as diagnostic charts, symptom diagnosis or BRAKE warning light diagnosis.CHART D - TRACTION OFF WARNING LIGHT ON CONTINUOUSLY & NO DTC SET (BUICK WITH UH8 OR U2A INSTRUMENT CLUSTER)Circuit DescriptionWhen ignition switch is first turned to RUN position, EBTCM goes through a self-test, which lasts 2-4 seconds. During self-test, EBTCM commands TRACTION OFF indicator warning light on. Powertrain Control Module (PCM) can also command EBTCM to set a Code 75 which will illuminate TRACTION OFF indicator.Traction control switch is located either on instrument panel center trim plate or driver's front door trim panel. Switch allows driver to select traction control mode (on/off). When traction control system is turned off, TRACTION OFF warning light comes on.EBTCM monitors transaxle temperature through

Jul 12, 2014 | 1998 Buick Park Avenue

1 Answer

How to shut off abs light


TCS light will be on to notify you when it is on/off..ABS light should not stay on while driving...if this occurs, there is a problem with your ABS system

Apr 05, 2014 | 2006 Kia Magentis 2.5

1 Answer

Abs light stays on and the esc indicator light also but when you start it it shows it off


the operators guide shows what these mean and what to do.
lost that>? i have one, and 08 JK.
pages 105 to 116
it resets each drive. the opr guide says that, and does.
its a very complex system, you should RTM.

ill quote your missing pages.
ABS:
If the light remains on after start-up or comes on and
stays on at road speeds, it may indicate that the ABS has
detected a malfunction or has become inoperative. The
system reverts to standard non-anti-lock brakes.
ESP:/TCS
The ESP/TCS Indicator Light (located in the instrument
cluster), starts to flash as soon as the tires lose traction
and the ESP system becomes active. The ESP/TCS Indicator
Light also flashes when TCS is active. If the
ESP/TCS Indicator Light begins to flash during acceleration,
ease up on the accelerator and apply as little throttle
as possible. Be sure to adapt your speed and driving to
the prevailing road conditions


is this clear? if not ask more, questions , more specific and we can peel the onion deep as you want.
also wiki this topic, to understand it ...

Mar 08, 2014 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

Abs light on


Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, SRS and BCM faults) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, SRS Supplemental restraint system, BCM Body control module

Oct 08, 2012 | Cars & Trucks

2 Answers

In my Volvo truck the TCS light is on all the time how to turn of


Hi there:
TCS is used to control wheel spin by utilizing the ABS system, I suggest scanning the module in order to know what fault codes stored there.



Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 27, 2012 | Cars & Trucks

1 Answer

Abs & TCS-off dash lights both stay on. Pushing the TCS off switch does not help. "seem" to stop fine. Emergency brake seems to be fully off, not dragging. My wife encountered a patch of ice...


Hello: If there is a problem in the ABS it will bring on the tcs light as well. To determine what is causing the problem you need to have the ABS checked with a scanner to get the code. Then trouble shoot the components that the code leads you to. Normal braking is available with the light on but TCS is not as it relies on ABS for functioning the TCS.

Mar 04, 2011 | 2008 Saturn VUE

1 Answer

1999 Oldsmobile silhouette brake light and tcs


check the abs sensors common to hit or damage the wiring or knock connection loose when doing a brake job the traction control system[tcs] is tied into the abs system

Jun 28, 2010 | 1999 Oldsmobile Silhouette

1 Answer

TCS light on


The TCS (Traction Control System) indicator comes on or flashes under the following conditions:

When you turn the ignition switch
to ON (II).

When you manually turn off the
TCS.

It flashes when the TCS is
regulating wheelspin.

If the system's diagnostics senses
a problem in the TCS, the indicator
will come on and stay on.

If the brakes overheat, the
indicator will come on.

If the TCS indicator comes on and stays on for more than 10 minutes while driving, pull to the side of the road when it is safe and turn off the engine. Reset the system by restarting the engine, and watch the TCS indicator. If the indicator remains on, or comes back on while driving, have the system inspected by your Honda dealer. You can still drive the vehicle without TCS.

This indicator will come on along with the ABS indicator if there is a problem in the anti-lock brake system.
The TCS indicator may occasionally come on for one or two seconds and then go out. This is normal.

Hope this helps you figure it out.

Dec 14, 2009 | 2000 Honda Odyssey

1 Answer

99 pontiac transport- tcs,abs,emerg brake and low traction(flash)


Have the ABS system scanned for codes. The ABS and Traction control use the same computer. You likely have a bad wheel speed sensor.

Apr 08, 2009 | Pontiac Trans Sport Cars & Trucks

Not finding what you are looking for?
2002 Hyundai Santa Fe Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...