Question about 1992 Honda Civic

1 Answer

What color wire should I tap on the distributer for a tachometer? 1992 honda civic cx

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 2,100 Answers

If that engine has an old dist with a coil, try one side of the coil, if that doesn't do it, try the other. If the coil is not present, but a coil pack, you will have wires coming out of it, besides the plug wires, one of them will do it, try the red one. make sure the tach is grounded and just check it with a test wire. It should go. Hope this helps.

Posted on Oct 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How many gallons of gas does a 1992 Honda Civic hold?


Depends on your model. Si and DX have 11.9 gallon tanks while CX and VX have 10 gallon tanks.
http://www.clubcivic.com/board/showthread.php?t=147263

http://www.civichatch.com/info/index.php

Dec 06, 2012 | 1992 Honda Civic

1 Answer

How to pull the axels out of a honda civic cx


you have to jack up th car remove the wheel dismantle the tierod end ,reove the axle nut tap it back with brass hammer if re using axle if not any hammer will do,then you will have to remove the bottom bolt to the strut at the very bottom axle has to drop down between the fork then pry it out of the transmission and its out reverse installation.

Jan 28, 2010 | 1992 Honda Accord

2 Answers

1992 honda civic cx 1.5l will not idle cold. after several restarts and feathering the gas it stays running but has no power in all 5 gears, but will run(sluggish) and idle after warm. Had valve job and...


Wow, hope all this was not done to fix this problem? If the problem showed up after the timing belt, I would say the timing belt is a tooth off. If it broke a timing belt, a valve might be bent. If all this was done to solve this problem, you need to find a better mechanic to diagnose it.

Nov 14, 2009 | 1992 Honda Civic

2 Answers

Where can I get wiring diagram for 92 Honda Civic LX?


Here several documents:

cb2ce2a.gif

Engine wiring-1992-95 Civic (except VX)

0ede761.gif

Engine wiring-1992-95 Civic VX

b88a19f.gif

Chassis wiring-1992-95 Civic, 1993-95 del Sol


06b1ea6.gif

Chassis wiring-1992-95 Civic, 1993-95 del Sol


Good luck... remember rated this help.

Aug 19, 2009 | 1992 Honda Civic

1 Answer

Honda civic 92 stops after short run


you might need to put a non return valve on the inlet pipe from the tank to the carburator

Mar 31, 2009 | 1992 Honda Civic

2 Answers

1993 HONDA CIVIC DX


Not that I know of. Try by checking all of your wiring.

Jul 24, 2008 | 1993 Honda Civic 4 Door

2 Answers

Fuse box diagram


There are two fusebox diagrams, one is your main fuse box.

- Main Fuse Box - Pop you're hood and it will be on the left, it will have different labeled squares with amperages on it.

- Panel Fuse Box - It's on the driver side to the left of the break pedal. I'd invest in a manual I can't tell you which is which.

Jun 29, 2008 | 1998 Honda Civic

1 Answer

98 civic lx where is ignition coil?? ++


IT'S A BLUE WIRE ON THE BACK OF THE CONNECTOR THAT WOULD NORMALLY GO TO THE FACTORY TACHOMETER IN THE DASH. YOU HAVE TO REMOVE THE DASH GAUGE CLUSTER TO GET AT THE CONNECTOR. THE CONNECTOR WILL NOT BE PLUGGED INTO ANYTHING IF YOU DON'T HAVE A FACTORY TACHOMETER (DX, CX, HX ETC...YOU WILL HAVE TO SPLICE INTO OR CUT THE BLUE WIRE FROM THE PLUG. IT GOES TO TACH SIGNAL WIRE ON YOUR NEW TACH.

Jun 11, 2008 | 1998 Honda Civic

Not finding what you are looking for?
1992 Honda Civic Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...