Question about 1994 Chrysler LHS

2 Answers

Our 1994 LHS is running great. Recently the engine shuts off while we are driving or when we are stopped at a light. The engine would start up again when we put it in neutral or park but recently it will have to sit about 1 hour before it would start again. We have replaced the fuel pump, CAM sensor and the MAP sensor but have not eliminated the problem.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It was the brain that had to be replaced

Posted on Jul 03, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Hey if you get the answer please let me know. i am having the same problem. on my 1994 Concorde. my email is jessicaswanner@ymail.com

Posted on Oct 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs great till you shut it off


Does it turn over very slowly, if so it would be your starter motor, have that checked first

Jan 04, 2014 | Chrysler LHS Cars & Trucks

1 Answer

I have a 1990 Z24, 3.1. Car runs great for a few miles, but shuts off when I come to a complete stop and the check engine light comes on. If I put it in neutral it starts right back up and runs great. ...


you have a typical lock up selanoid problem in the transmission. very comon on these th125 type of transmission. replaced many in our shop before

Jan 24, 2013 | Chevrolet Cars & Trucks

1 Answer

1994 chevy cvalier 3.1 engine...lately it's been shutting off when i come to stop. the oil pressure fluctuates and then shuts off. it always starts back up. any suggestions?


if this unit has an over drive tork converter the tork converter or the TC valve (solenoid) might be faulty, have you tried keeping your foot on the gas a bit to keep it running ? and what happens ? also some engines have a low oil pressure warning and engine cut out , did you check your oil ???

Jun 10, 2012 | 1994 Chevrolet Cavalier

1 Answer

94 chrysler con.3.3 eng.runs for about 15 min. shuts down,engine


suggest change crank sensor-rear of engine pas side

Oct 05, 2009 | 1994 Chrysler LHS

1 Answer

1994 Chrysler LHS Starting Problems


it's either a spark or fuel fault , if there is spark after it shuts down it is a fuel fault. connect a pressure gauge in the fuel line, start the engine , note fuel pressure around 35 psi , stop engine , pressure should drop a little then hold, if not check pump return valve and pressure regulator , check fuel flow , if low replace fuel filter,

May 05, 2017 | 1994 Chrysler LHS

2 Answers

Stalls out when I stop


check the iac i sounds like it is acting up

Nov 25, 2008 | 1994 Dodge Ram

2 Answers

Oil pressure


I had the same problem on my 2003 Intrepid and the only solution was to replace the engine. If this is a 2.7 liter, (like mine) this may be what you need to do to get it back on the road. This is expensive, mine cost nearly $6000 in parts and labor. Even if it's just an oil pressure problem, you don't have to run it run to mess things up.

Oct 18, 2008 | 2000 Chrysler LHS

2 Answers

1994 Chrysler LHS engine won't turn over.


I checked another site that had a possible solution. It told how to check the ignition switch. After performing this check I decided to replace it. Still no go. The only other thing I could think of was possibly a loose or broken wire somewhere. After looking it over I decided that tracing the wires would be too much trouble.

My solution was to by a remote push button starter switch. I'd just run a wire from the battery to the switch and from the switch to the starter. As of this writing I'm still in the process of installing it. I did manage to "hot wire" the starter and it started fine. That's what lead me to believe the problem is in the wiring. So this remote switch should work.

Sep 26, 2008 | 1994 Chrysler LHS

2 Answers

Engine stalling


ignition control module shuts car off when gets hot and will start after it cools on a 94 its under coilpack easy fix

Jul 22, 2008 | 1994 Oldsmobile Ninety Eight

Not finding what you are looking for?
1994 Chrysler LHS Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...