Question about 2002 Buick Rendezvous

Open Question

2002 buick rendezvous 3.4 rocker arm torque specs

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 617 Answers

SOURCE: intake manifold bolts torque and rocker arm torque

Intake Manifold Coolant Pipe Bolt .... 89 in lbs (7.4166 ft. lbs)
Lower Intake Manifold Bolt .............. 115 in. lbs (9.5833 ft. lbs)
Upper Intake Manifold Bolt/Stud ...... 18 ft. lbs
Valve Rocker Arm Bolt ................... 168 in. lbs (14 ft. lbs +30 degress

Posted on Feb 06, 2010

  • 1 Answer

SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine

Head Bolts
Step one 37 ft lbs then tignten 120 degrees more

Rocker arms
Step one 11 ft lbs then tighten 90 degresss more

Upper intake
89 inch lbs
Lower intake
132 inch lbs

Posted on Dec 02, 2008

  • 2692 Answers

SOURCE: Torque Specs

Torque: 210 @ 4000 rpm

Posted on Dec 22, 2008

  • 54 Answers

SOURCE: O2 sensors on 2002 buick rendezvous

hi im wes the o2 sensor is always in the exaust newer buicks have one before the converter (sometimes in the exaust manifold) one after the converter if it has duall exaust it could have four
left bank sensor one is before the converter on drivers side bank two sensor 2 would be passanger side after the converter does this help?

Posted on Mar 12, 2009

sirgabe51
  • 66 Answers

SOURCE: I have 4.9L6 need torque specs for cylinder head

for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.


e023442.jpg

Posted on Dec 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the correct torque specs. for lower intake manifold and upper, and rocker arm torque for 02 Buick Rendezvous 3.4 v-6 are the rocker arms pre load non adjustable


Call any major autoparts store for the correct answer. There are updated torque specs for the gm 3.4 vs in order to deal with a common issue of leaking intake manifold gaskets. They should have the correct updated spec for you vehicle based on the specific Vin number

Feb 01, 2017 | 2002 Buick Rendezvous

1 Answer

2003 buick rendezvous rocker arm torque spec


14 N.m (124 lb. in.) plus 30° This what the book says. But 10 foot pounds plus 30 degrees.

Oct 15, 2016 | 2003 Buick Rendezvous

1 Answer

Torque specs 2003 olds silhouette rocker arm 3.400


Here is a suggested updated torque spec for this engine's rocker arm bolts;
Rocker arms
Step one: Torque to 11 ft lbs then tighten an additional 90 degrees of bolt head rotation. Some guys don't fuss with the torque specs and just get them good and tight. Either way, be careful, as the heads are aluminum. You do not want to over tighten these bolts

Oct 07, 2016 | 2003 Oldsmobile Silhouette

1 Answer

What is the right way to torque the rocker arms an the sequence


No torque sequence on rocker arm bolts. 11 ft lbs plus 30 degrees.
A torque wrench rated for inch lbs should be a finer adjustment.

Oct 06, 2016 | 2002 Buick Rendezvous

1 Answer

Looking for torque setting for 2002 ford ranger with a 3l rocker arms


The bolt torque spec for the 3.0 Vulcan V6 rocker arms is 18-26 foot lbs, I always set it in the middle, so 22 foot lbs will do just fine. If I helped please rate me for fixya.com
Thanks

Oct 25, 2011 | 2002 Ford Ranger Regular Cab

1 Answer

Rocker arm shaft torque specs for a 2002 nissan 3.3


rocker arm and shaft torque is 13 - 16 ft lbs

Apr 06, 2011 | 2002 Nissan Xterra

1 Answer

Instructions on changing rocker arm


remove valve cover remove center bolt on rocker arm, it could be a 10mm put new rockerarm in tighten to specification. it could be 15 - 20 ft.lbs. of torque. e-mail me engine size and will email you torque spec tomorrow

Feb 16, 2011 | 1999 Buick Regal

1 Answer

What are the torque specs for the intake manifold on a 2002 Buick Rendezvous


the torque spec's require you to tightened to 10 ft lbs and then tighten another 30 degress which will give you about 12 to 15 ft lbs of torque. make sure that you start in the middle and work your way out when tightening manifold because it will crack easily.

May 02, 2010 | 2002 Buick Rendezvous

1 Answer

Intake manifold bolts torque and rocker arm torque


Intake Manifold Coolant Pipe Bolt .... 89 in lbs (7.4166 ft. lbs)
Lower Intake Manifold Bolt .............. 115 in. lbs (9.5833 ft. lbs)
Upper Intake Manifold Bolt/Stud ...... 18 ft. lbs
Valve Rocker Arm Bolt ................... 168 in. lbs (14 ft. lbs +30 degress

Feb 06, 2010 | 1999 Buick Century

Not finding what you are looking for?
2002 Buick Rendezvous Logo

Related Topics:

1,355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...