Question about 1997 Ford F350 Crew Cab

Open Question

Removal and replacement for a 1997 ford F350 headlight assembly I need to remove and replace the headlight assembly in a 1997 Ford F350

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: cant remove the headlight assembly from a 1998

You have to basically remove the bumper cover in order to do this.
You will need a 10mm socket with a couple extensions and a phillips screwdriver.
First remove the plastic shield inside the wheel well using the phillips screwdriver.
There are 3 10mm bolts that have to be removed the attach the bumper cover to the fender. The first one is just inside the newly uncovered hole. For the other 2 you will need the extensions. They are located all the way back in the hole beside the headlight assembly. If you look in with a flashlight You will see 3 bolts down in there. One of them will have a 1/2 inch spacer on it. Do not worry about this bolt, it holds the header panel on. The other 2 bolts are the ones you need to remove. Once this is done, if you need to remove the bolts under the hood that hold the bumper cover on the header panel. You should now have adequate movement to move the bumper cover out of the way of the 3 10mm bolts on the headlight assembly that were blocked.

Posted on Apr 05, 2009

Ad
  • 117 Answers

SOURCE: Mercury Villager headlight assembly diagaram for removal

it is a bit of a time consuming job it would be best to get a diagram to see where everything goes as this will help you alot otherwise take to a mechanic.
cheers
any feedback left would be great

Posted on Jul 01, 2008

  • 38 Answers

SOURCE: how do i remove starter on 2001 ford f350 dually (7.3 l powerstroke)

Starter

Removal & Installation 1. Disconnect the positive and negative battery cables.
2. Raise and safely support the vehicle.
3. Remove the starter terminal cover.
4. Remove the terminal nut and separate the battery starter cable from the starter motor.
5. Disconnect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid.
ø To disconnect the hard-shell connector from the solenoid (S) terminal, grasp the plastic shell and pull off; do not pull on the wire. Pull straight off to prevent damage to the connector and (S) terminal.
6. Remove the starter motor retaining bolts.
7. Remove the starter motor from the vehicle.
To Install:
8. Place the starter motor in position and install the starter motor retaining bolts. Tighten the bolts to 15-20 ft. lbs. (20-27 Nm).
9. Install the battery starter cable and a terminal nut to the starter motor. Tighten the terminal nuts to 79 inch lbs. (9 Nm).
10. Connect the solenoid (S) terminal connector, if equipped with a starter mounted solenoid.
11. Install the starter solenoid safety cap. If equipped.
12. Lower the vehicle.
13. Connect the positive and negative battery cables.
14. Start the engine several times to check starter motor operation

Posted on May 27, 2009

DIESELMUDDER
  • 2760 Answers

SOURCE: replace fuel pump on 03 Ford F350 diesel

simple : obtain replacement pump from parts provider (no used stuff)

Now help me out here: thats the year they were bolted to the pass side front of engine
and not inside the tank right? (better go look to see for sure)

using a tube wrench unscrew the fuel lines (i use large wire nuts to temp block off fuel leakage)

with a 12 mm wrench undo the two side bolts holding the pump to block

wiggle pump it should come straight off

clean mounting place on block with solvent let dry

silicone back (or use gasket that comes with pump ) of pump

apply pump to block (depending on where crank stopped you may have some tension on arm you will have to overcome to get flange to meet block )

use locktite (blue)or simmiliar thread lock on bolts retighten firmly but not hang up the dog tight

use light grease or vasolene on tube connections don't try to tighten dry

Now the fun part your diesel now has air in the fuel system

there are two ways to remove this ( hard and harder)
your choice here are both methods

loosten the fuel supply line for #8 injector ( I did not say remove) 1 full turn ought to be enough

crank engine 30 seconds only
wait 5 minutes for starter to cool down
crank engine 30 sec again
did it start but runs rough while it's still running tighten #8 injector (caution fuel under high pressure)
engine smooth out good your lucky
engine did not start yet
wait 5 minutes
crank engine 30 sec again
start yet
if so tighten #8 injector up

Now here's something I've done to my diesel to make this much less a hasstle

trace fuel line as it comes up from pump
obtain a small low pressure electric fuel pump and a two short pieces of fuel line
and a few clamps

use tube cutter and cut fuel line just before it bends to go in filter
deburr edges
slide tube and clamps over pipe (both sides)
insert pump observe flow arrrow towards filter

the wires of pump can be stretched over to #1 battery terminals

now any time you change a filter or open your fuel system for any reason
all you need do is connect pump to battery
open sharader valve on top of filter for a few min
and start truck as normal
then disconnect wires and stow away for another day

Posted on Jul 08, 2009

wfservices
  • 260 Answers

SOURCE: headlights removal ford explorer 96

  1. Check that headlamp switch (11654) is in the off position.
  2. Lift hood (16612).
  3. Release latch and swing filler panel to left or right.
  4. Remove electrical connector from headlamp bulb by grasping wires firmly and snapping connector rearward.
  5. Remove headlamp bulb retainer (13N019) by rotating counterclockwise (when viewed from rear) about one-eighth turn and sliding ring off plastic base. Keep headlamp bulb retainer as it may be used again to retain new headlamp bulb.
  6. Carefully remove headlamp bulb from socket by gently pulling straight backward out of socket. Do not rotate headlamp bulb during removal. 7056091.gif
Headlamp Assembly, Explorer
Removal and Installation
  1. Disconnect battery negative cable.
  2. Remove blind rivets (2) attaching screws (4) and radiator upper sight shield.
  3. Remove turn/park lamp attaching screws (2) and pull assembly away from body. Remove bulb sockets from housing and remove lamp assembly. Repeat on opposite side of vehicle.
  4. With turn/park lamp assembly removed, screw attaching grille to front fender flange is accessible. Remove grille attaching screw. Repeat on opposite side of vehicle.
  5. Remove attaching screws (4) located across top of grille.
  6. Grip lower edge of grille and pull outward to disengage from retaining clips. Remove grille.
  7. Using needle-nose pliers, compress barbs on headlamp housing retainer. With barbs compressed, pull forward on housing just enough to disengage from retainer. Repeat on opposite side of headlamp housing.
  8. Turn headlamp housing as necessary and pull forward to disengage from headlamp aiming ball socket.
  9. Disconnect wiring from headlamp bulb socket.
  10. If replacing headlamp housing, remove retaining collar and bulb.
For installation, follow removal procedures in reverse order. Make sure to check headlamp aim. 568a220.gif

Posted on Apr 04, 2010

Testimonial: "thanks mate!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove headlight assembly for ford f250 super duty?


There should be three screws holding it in from behind. They will be three long post looking type of stand offs. Remove those and the whole assemble will come out with a pop.

Jul 26, 2014 | 1997 Ford F250 SuperCab

2 Answers

Headlights wont work and dash and parking lights come when ignition switch is turned on. sometimes jiggling wires works. what is the problem?


Check out related help links with solutions to troubleshoot these problem.
Click the link below directly:---
Heater fan and headlights will not turn off with ignition off? http://technoanswers.blogspot.com/2012/01/heater-fan-and-headlights-will-not-turn.html

---------
High beams stopped working but headlights still work?

http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html

---------------
Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------------
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html ------------- Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html-----------
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------
Headlight wiring diagram for 1997 Lincoln Town Car?

http://technoanswers.blogspot.in/2012/02/headlight-wiring-diagram-for-1997.html

-----------
Dash Lights And Front Marker Lights Flashing On And Off http://schematicsdiagram.blogspot.com/2012/10/dash-lights-and-front-marker-lights.html
---------- 2001 Chevrolet Tracker: Headlights and Dash lights Pulsating? http://whoisbyme.blogspot.in/2012/06/2001-chevrolet-tracker-headlights-and.html
--------- No parking lights and headlights not turning OFF? http://technoanswers.blogspot.com/2012/01/no-parking-lights-and-headlights-not.html
------------- How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html
--------- Head Lights Comes ON by Itself? http://whoisbyme.blogspot.in/2012/07/head-lights-comes-on-by-itself.html
--------- Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

-------------


Only high beams working on GMC Savana?---------
Working of Headlight switch?

----------
Both headlight bulbs blow together?
--------

Car headlight bulbs don't last long?


--------
How to replace Headlight Bulbs on Lincoln Town Car?

http://howtobyme.blogspot.com/2011/12/how-to-replace-headlight-bulbs-on.html


How to change headlight?

http://repairhelpcenter.blogspot.com/2011/12/how-to-change-headlight.html

-------------
Both headlights and turn signals not working? http://schematicsdiagram.blogspot.com/2011/12/both-headlights-and-turnsignals-not.html

----------
Headlights will not turn OFF on Ford expedition and car trailer?

http://technoanswers.blogspot.com/2012/01/headlights-will-not-turn-off-on-ford.html

----------
Headlight Assembly Removal on 2010 buick lacrosse? http://technoanswers.blogspot.in/2012/04/headlight-assembly-removal-on-2010.html
--------- Headlights flickering and car hesitates to start?

http://howtobyme.blogspot.in/2012/02/headlights-flickering-and-car-hesitates.html

---------
Hummers headlights flashes while start?

http://technoanswers.blogspot.in/2012/02/hummers-headlights-flashes-while-start.html

----------
Using non-AFS headlamp assembly for AFS assembly?

http://schematicsdiagram.blogspot.in/2012/02/using-non-afs-headlamp-assembly-for-afs.html

------------

How to replace Headlight Bulb on 2001 mitsubishi magna
http://www.howtorepairguide.com/2012/10/how-to-replace-headlight-bulb-on-2001.html

---------
These details will help.
Thanks.



Nov 22, 2012 | 1996 Pontiac Grand Am

1 Answer

How do you replace a fuel pump in a 1997 ford f350 crew cab


Removal & Installation 88285g11.gif

Details of the fuel pump assembly
Click to Enlarge 88285g12.gif

View of the fuel pump
Click to Enlarge

  1. Disconnect both battery ground cables.
  2. Properly relieve the fuel system pressure.
  3. Raise and safely support the vehicle securely on jackstands.

The electrical connector is located behind the fuel pump near the frame rail.

  1. Detach the fuel pump electrical connector.
  2. Remove the fuel line retaining clip and discard, then remove the fuel line from the fuel pump.
  3. Slide the clip up and off from the quick connect fitting. Insert the fuel line tool and remove the fuel pump delivery line.
  4. Unclip the brake lines from the fuel pump bracket.
  5. Loosen the pinch bolt and spread the mounting bracket.
  6. Remove the fuel pump.

To install:

  1. The installation is the reverse of the removal.

Oct 29, 2010 | 1997 Ford F350 Crew Cab

1 Answer

I have a ford f350 and am trying to remove the old headlight assembly and replace with new one, can't seem to find out how to detach it from the truck


this for aero headlamp, plastic lens. please rate.

SECTION 417-01: Exterior Lighting 1999 F-Super Duty 250-550 Workshop Manual
REMOVAL AND INSTALLATION Lamp Assembly —Headlamp, Aerodynamic Removal
  1. NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position.
    Remove the headlamp assembly.
    1. Pull up and remove the two upper headlamp clips.
    1. Release the lower headlamp clip.
    1. Position the headlamp so the connector can be accessed.
    1. Disconnect the headlamp connector.
Installation
  1. Install the headlamp assembly.
    1. Position the headlamp assembly.
    1. Connect the headlamp connector.
    1. Install the lower headlamp clip.
    1. Install the two upper headlamp clips.
      • If necessary, adjust the headlamps. For additional information, refer to Headlamp Adjustment—Photometric Aiming or Headlamp Adjustment—Screen Method Aiming in this section.
      • d1d723b.gif

Aug 09, 2010 | 1999 Ford F350 Regular Cab

1 Answer

Need to replace 1997 e350 ford Ignition ,how can i


you dont have to remove the steering wheel on a most Ford car and trucks you insert the key turn to the on position and there is a small pin under the ignition switch that you push and it comes right out.you have to remove the steering wheel cover above and below the ignition switch.

Oct 04, 2009 | 1997 Ford F350 Crew Cab

2 Answers

1997 f250 front headlight assembly replacement proceedure -


How do you remove the chrome headlight door on a 97 f250 powwerstoke

Sep 24, 2009 | 1997 Ford F250 SuperCab

1 Answer

97 F-350 Headlight door removal


The front couple bolts (enough to fold the inner fender wells) on the fender wells (plastic part around inside the wheel well). Take them out, I think i did 6. Basically, just do what you have to do to fold the front part of that plastic inner fender well enough to see behind the parking light, then you need to remove the parking light/corner light assy. and once they are out you can reach the final screws required to remove the headlight trim rings. Also there are a few people on EBAY that are selling replacement headlight/parking/corner light assemblys that have clear outer lenses that dont get all yellow and foggy as the stock ones do. I bought smoked ones that have a light tint to it and they have projector caps so you can use HID kits and get a nice beam. something you might want to look into if your going to do the trim rings since its kind of a p.i.t.a.

Oct 15, 2008 | 1997 Ford F350 Crew Cab

1 Answer

Head light replacement 97 f 350


inside the engine compartment directly behing the headlight you unscrew the old one. turn about 1/4 of a turn and it comes out.

Oct 09, 2008 | 1997 Ford F350 Crew Cab

Not finding what you are looking for?
1997 Ford F350 Crew Cab Logo

Related Topics:

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5516 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...