Question about 1990 Mazda 323

2 Answers

Left front turn signal blew. Replaced bulb. Stays solid with lights on. Doesn't flash. When lights off doesn't flash. Could this be a fuse problem? Do I need a new flasher? What do i ? Please help! Thank you so much! Dan Miami, FL

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mazda Master
  • 2,122 Answers

Hi Dan, Do the other indicators work correctly with just the one staying on and not flashing? or is it all of them?....If none flash when you select the left or right turn, you'll need a replacement flasher unit....If only the one which blew stays on constantly while the others flash you have a short circuit....I'd like to help more so if you can send me more info that'll help a lot...What is the behavior when the marker (park) lights are on....And when the high and low beam are on....is there any change?....Test all the lights one circuit at a time and check to find out if there is any change in behavior...don't forget the reverse or the brake lights....And what happens when you turn on the hazard warning, any flashing then? Let me know....Regards Johngee10

Posted on Oct 16, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,309 Answers

Sure you got the right bulb??? then check for signal to light and check the ground

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Malibu right turn signal doesn't work when using brakes


Its not a fuse and I doubt it is a switch.
The most common problem is a bad ground going to the bulb.
If the three circuits going to the bulb are ok, it might be in the turn signal switch.

Apr 14, 2013 | 2003 Chevrolet Malibu

1 Answer

Right front side turn signal does not work replaced all bulbs and checked fuses headlight flashers work when hazards are on front to back except driverside turn signal ,in dash right stays solid left


I don't believe it would be a bad ground for just one light. It could be a wire, a socket connector, or the bulb socket itself. See if the wire has power at the socket when signaling left, with key on. If there is power, probably a bad socket or connector. If no power, check for power coming from flasher-the wire going to front left, or driver's side. If you have power from the flasher, but nothing at the socket, the wire has probably broken.
Good luck.

Feb 06, 2013 | Cars & Trucks

1 Answer

2005 Pontiac Grand Prix front left turn signal went out, I replaced the bulb and the light comes on but the turn signal still doesn't work. If I have the lights sent on automatic the right parking


Hey I literally just today had the same problem, put a new bulb in the light was on but did not blink!!!! SUPER EASY SOLUTION, you simply have the bulb in too far. I gently pulled mine out a tiny bit and it started working fine... guarantee that's all that's happening to you!!!

Jan 25, 2013 | 2005 Pontiac Grand Prix

1 Answer

Turn signal light on dashboard is solid but no flashing in rear or front.


where did you get the flasher from? autozone? try to get another one from a good parts supplier. if not, check the bulbs themselves. if they are supposed to be a dual filiment bulb, and only a single filiment bulb is in there, it may not flash. try using the turn signals with the parking lights on. does this make a difference?

Nov 04, 2012 | Cars & Trucks

2 Answers

Left back signal light doesn't work but front one flashes really fast


Check and replace the bulb first before you do anything else.

Jul 10, 2012 | 1999 Plymouth Voyager

1 Answer

I have a 2000 maxima...when headlights are on, passenger side blinker stays lit on the dash and doesn't flash at all. While the headlights are off and i turn the passenger turn signal on it then b


Plain and simple...Your turn signal circuit is shorted to your headlamp circuit. What USUALLY causes this is an incorrect light bulb has been installed in the vehicle or the light bulb was installed incorrectly. There are other possible causes of these circuits being shorted together, but 99 out of 100 of the times that I have seen this it is either because somebody just replaced a bulb or a bulb socket melted somwhere on the car. Be sure to check both the front AND rear bulbs.

Jan 07, 2012 | 2000 Nissan Maxima

2 Answers

My 2008 Chevy Cobalt coupe has a passenger side turn signal that flashes fast on the instrument panel. However, no turn bulb is burnt out in either the front or rear. The rear passenger turn blub just...


It is as simple as your hazzard switch needs to be replaced yes your hazzard switch as now turn signals are built threw the hazzard switch my PT Cruiser had same problem as my s10 replaced hazzard switch fixed the problem

Aug 18, 2011 | 2008 Chevrolet Cobalt

1 Answer

Rear turn signal and hazard light don't flash (left side only)


The rear left turn signal bulb must be replaced immediatly before it melts the light socket, if it has'nt yet. Also please verify that the correct light bulb is being installed. because even though many bulbs look the same they are not identical. Installing the wrong bulb can be the begining of many, many problems in the particular circuit

Mar 26, 2010 | 2000 Ford Focus

2 Answers

2001 caravan light problem


You have a shorted bulb. Replace the bulb.

Jan 07, 2009 | Dodge Caravan Cars & Trucks

Not finding what you are looking for?
1990 Mazda 323 Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...