Question about 2000 Pontiac Bonneville

1 Answer

How do you remove a front axle on a 2001 boneville

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,074 Answers

This may help Tim:

http://www.autozmagz.com/search/ft+lbs+of+torque+on+03+pontiac+bonneville+axle+nut

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the spindle axle on a 2001 dodge ram 1500 2wd? And what is the name of it exactly?


The spindle is what holds the front tires on. The axle is what holds the rear tires on. To remove the spindle, you have to remove the brake caliper first the remove the ball joint nuts. hit the spindle were the ball joints go in. The shock will release the ball joints. To remove the axles, you have to remove the differential plate, spin the differential until you see the bolt that locks the center pin in. remove both. push in the axle and remove the C clip. pull the axle out.

Oct 15, 2016 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

How do you replace a cv axle?


Search for that on YouTube.com entering your cR info an cv axel

Mar 26, 2015 | 2001 Mitsubishi Diamante

1 Answer

Is there an electric or vacuum switch on a 2001 chevy blazer


There are 2 models here the push button will flash if the system is not engaging or disengaging properly . If front drive shaft is turning. That is with car raised and supported . if front drive axles do not turn then the axle actuator is not engaging axle shaft passenger side. Remove actuator and manually engage shifting collar with a screwdriver still does not turn then inner axle is twisted.

Mar 21, 2014 | 2001 Jeep Grand Cherokee

1 Answer

How do I change the front driver side axle assembly on a 2001 Dodge Stratus?


first jack up side you will be working on and place jjackstand under the frame, next remove the wheel,to make it easier remove the caliper and tie away, dont remove the brake hose!, then remove the rotor it slides off you may need to tap backside with a hammer, next is to remove the bolt and nut from the lower balljoint, then use balljiont tool to saperate the lower control arm from spindle, you may need a pry bar to pull down on control arm to completly separte move spindle to side and let arm up, next remove the axle (cv) nut on the front, then use pry bar to pop out of trany, install new axle hold straight and slide into tray as far as you can then with nut on the axle a little tap to axle in to trany the rest of the way you will feel it go in and lock and then reverse direction to put back together, hope this helps.

Sep 02, 2010 | 2001 Dodge Stratus

1 Answer

On my 2001 Dodge Ram 1500 5.2 2WD, I just found


This is a very simple job to do. Raise the front of truck off the ground,block the rear tires. Using pliers and a hammer,remove the grease cap from hub. Remove the cotter key and nut from axle,pull out slowly and remove outer bearing. then remove hub from axle. To remove inner bearing ,prop hub on a board and use a large punch to drive out bearing and seal. Clean out inside the hub and install new bearing and seal. Replace all parts in the reverse as you took them off. Hope this will help you.

May 14, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

How do I change the front wheel bearing in a 2001 Sonata 6 cyl


jack the front off the ground remove the tire remove the brake caliper remove the rotor remove the bolt hol;ding the front axle into the spindle hub, remove the hub and bearing.

May 06, 2010 | 2001 Hyundai Sonata

1 Answer

How to replace front wheel hub 2001 cavalier


remove the wheel. remove the brake caliper and brake rotor. if the car has abs, unplug the connector and undo the clip from the knuckle. remove the axle nut. tap on the end of the axle with a soft faced hammer until it begins to move back, being careful not to damage the threads on the axle. remove the 3 bolts on the backside of the hub that hold it onto the knuckle. use a hammer with a chisel, or an air hammer if available to free the hub assembly from the knuckle. reverse for install. dont forget to torque the axle nut to spec.

Nov 25, 2009 | 2001 Chevrolet Cavalier

1 Answer

How do i remove the front left axle?


to remove your front axles also known as cv axles you have to pull your brake caliper and rotor off. Then you have to break your hub assembly nut that holds the cv axle tight to the hub assembly. Then you have to bust loose your upper and lower ball joints. After then its 4 or 6 bolts where your cv axle attachs to your front differental.

Sep 23, 2009 | 2001 Dodge Dakota

2 Answers

Clicking noise in front end 2001 dodge ram 4x4


the ansew i found is replacing the seal around the joint and from both end removing it and cleaning it out i had rocks in mine from going threw water and mud ita a all day deal but a twenty doller fix axle shaft oil seal is all i had to replace

Apr 05, 2009 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
2000 Pontiac Bonneville Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...