Question about 1999 Ford F250 Regular Cab

1 Answer

99 f250 stalled and won't start

Truck just stalled out on me! It started back up after about half an hour and made it 2-3 more miles until it stalled again. haven't been able to start it since

Posted by on

  • 3 more comments 
  • Anonymous Nov 25, 2008

    hi i have the same problem, only mine stalls after a few hundred yards. Apparently it is air in the fuel, or so i told. im about to have mine fixed now so will let you know how i get on.

    Mall

  • scashion2001 May 11, 2010

    have you replaced the cam postioning sensor? theyre on recall from ford

  • Anonymous Mar 16, 2014

    engine stalling out then just cranks and cranks wont start back until it sit for several houres

  • Anonymous Mar 17, 2014

    truck starts then sputters stalls and wont start again

  • PEDRO RIOS
    PEDRO RIOS Apr 03, 2014

    I SUGGEST YOU GET YOURSELF A FUEL PRESSURE GAUGE THAT GOES CONNECTED TO THE FUEL RAIL AND TURN KEY TO START POSSITION THREE OR FOUR TIMES,YOU SHOULD GET A READING ON THE GAUGE ON YOUR PRESSURE EVEN IF IT DON'T START,THINK YOU SHOULD START FROM HERE,THEN IF PRESSURE IS GOOD YOU KNOW IT MIGHT NOT BE FUEL PUMP ,,,HOPE THIS HELPS, GOOD LUCK

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 659 Answers

Could be a bad injector driver module

Posted on Nov 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs until warm and shuts off


hello ther I belive it is your ecu very common

Feb 05, 2014 | Ford Explorer Cars & Trucks

1 Answer

2001 ford f250 that starts and stalls after sitting for 2 hours


Some models have a fuel pressure service port on the injection fuel rail. Test pressure running should be around 36 psi shut engine off if drops to zero then pressure regulator is leaking into the return line.

Nov 05, 2013 | Cars & Trucks

1 Answer

Truck will run 1/2 mile and quit


Interesting.
When it stalls and won't start, are you missing spark to the plugs or fuel to the injectors ?

Oct 02, 2012 | 1994 Chevrolet K2500

1 Answer

1985 toyota 4runner running too lean


Maybe it's not running lean. Maybe it's misfiring. Since you put in new fuel parts and that didn't help, maybe there is an ignition component that fails when it gets hot. A bad coil can do this, also the igniter-rarely, admittedly, but you could have it tested. When it stalls and won't start, if you check for spark and find none, it would confirm an ignition problem.
I hope you find it. Post back and let us know.

Jul 29, 2012 | Toyota Cars & Trucks

1 Answer

93 Deville, 4.9L, 113k miles. I'm a decent mechanic (have replaced engines, heads, etc.). The latest problem is an intermittent stall. The first time it happened the car was driven for 10 mins then...


Now you can do the Fuel Pump

They seize up mechanically and fail
Electrically

Did you drive with a fuel pressure gauge,
taped to the windshield

Got a good fuel filter

Looking won't help you

Always do some type of testing,
before replacing anything

Dec 15, 2010 | 1993 Cadillac DeVille

1 Answer

Starts/stalls won't run until pedal tapped, 2 miles in town, 6 miles highway, then1000-1500 idle. shut down 9 hours, start/stall tap pedal runs return 6 mi. highway,2miles town same high idle. checked code...


Check your IAC motor (Idle Air Control) It could be sticking open.
Ps. Might be called Idle Speed Control motor it depends on the make and i forget what chevy calls theres.

Mar 11, 2010 | 2000 Chevrolet Malibu

3 Answers

Engine shut down after 15miles then won't start for half hour


just went thru the same think wit a s 430 it was the crank position sensor . 60 bucks at auto zone and it took me 5min. 2 install if u need help feel free to call me 918 808 9706 chris

Feb 20, 2009 | 2000 Mercedes-Benz S-Class

1 Answer

Truck will not start


check to make sure you are getting fuel, when an electric pump heats up they quit working,then when they cool down they might start workig again until it heats up again. or if you have a performance chip in your pcm they short out pull out chip and see if problem is still there

Feb 16, 2009 | 1999 Ford F250 Regular Cab

Not finding what you are looking for?
1999 Ford F250 Regular Cab Logo

Related Topics:

537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...