Question about 1995 Chevrolet Suburban

1 Answer

95 chev surburban brake lights do not work fuses are good replaced brake light switch could it be the signal switch

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 187 Answers

Hi, the brake lights are routed through the combo, or directional switch, this could be an issue, make sure the brake switch has power at the white wire , when the pedal is depressed, and make sure there is power at both sides of the fuse, if so, you could plug a combo switch in, and see if this is it. Good luck...Coop

Posted on Oct 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 mustange gt brake light dont work check #9 fuses change all bulbs replaced switch on brake pedal hazards lights works ,parking or running lights works,turning signal lights works,what other places i...


I assume the fuse has power if the hazards work.
The third brake light skips the turn signal switch, the regular brake light circuit goes thru the turn signal switch.
Do you have power going into the turn signal switch on the red lite green wire from the brake switch ?

Feb 17, 2013 | 1995 Ford Mustang

1 Answer

Turn signals work, brakes and flashers do not work. any ideas?


Check your fuses and brake switch for power going to it then follow harness from brake sw connector up to above steering column there is a 6 terminal plug, make sure this plug is seated tightly and not partially pulled apart...this plug is sometimes the culprit it has a retainer that holds it together, but it can be pulled apart partially from factory and it keeps Brake lights from working ,I just chased one of these down on a 95 1/2 chev. you will have to pull plug apart to plug it in straight, take column lower cover off to see it. it is held in place with a rosebud retainer, pop loose with a screwdriver to make easier acess to plug, good luck, if this is O.K. your signal head in strg. column might be bad, 4 ways and brakes run through that also ...would check plug first save you 150.00 for nothing !

Feb 02, 2013 | Chevrolet G20 Cars & Trucks

1 Answer

95 Regal Custom, ABS code #95 brake switch circuit and no brake lights. Replaced SLS still no change.


Check the brake light switch (location pedal) unplug the switch & bridge the wires & if the brake lights come on the switch is faulty. all you are doing by bridgeing the wires is bypassing the switch. What is SLS?

Oct 10, 2012 | Buick Regal Cars & Trucks

1 Answer

Have a 1999 Chev. Suburban. Problem is with brake lights. Top panel (on roof) works but neither side panel works. Replaced circut boards in tail lights, new bulbs, and all fuses are good. What next?


WITH A GOOD FUSE TESTER, TEST ALL THE FUSES FUSEBOX UNDER THE HOOD & INSIDE THE VEHICLE. IF THE FUSES ARE ALL GOOD WITH THE TESTER YOU MUST HAVE A BAD BRAKE LIGHT SWITCH OR A BAD TURN SIGNAL SWITCH. THE BRAKE LIGHT CIRCUIT GOES UP THROUGH THE TURN SIGNAL SWITCH & THEN TO THE BRAKE LIGHTS. FIRST OF ALL IS THE BRAKE LIGHT SWITCH GOOD ? THE ORANGE WIRE FEEDS THE BRAKE LIGHT SWITCH, THE WHITE WIRE PUTS POWER TO THE TURN SIGNAL SWITCH, SO THE LIGHTS CAN BE USED AS TURN LIGHTS OR BRAKE LIGHTS. , PUT A TESTER IN THE WHITE WIRE & PRESS ON THE BRAKE PEDAL. IF THE TEST LIGHT LIGHTS UP, BRAKE LIGHT SWITCH IS GOOD, BY THE WAY THE BRAKE LIGHT FUSE MAY BE LABELED" STOP", THE FUSE LABELED" BRAKE" IS FOR THE ABS SYSTEM. TO CHECK THE TURN SIGNAL SWITCH FOR BRAKE LIGHTS, REMOVE THE PLASTIC COVER FROM UNDER THE STEERING WHEEL, PRESS ON THE BRAKE PEDAL, PUT THE TESTER IN THE SMALL YELLOW WIRE, THEN THE SMALL GREEN WIRE. IF THERE IS NO POWER IN EITHER WIRE, THE TURN SIGNAL SWITCH IS BAD.

Jan 11, 2011 | 1999 Chevrolet Suburban

2 Answers

1999 lumina chev brake light stop no work


Check the brake light fuse if its ok then check the bulbs if they are ok then check the brake light switch. Good luck

Jan 03, 2011 | 1999 Chevrolet Lumina

2 Answers

Left turn signal doesnt work and my brakelights


  1. Check the fuse make sure it is not busted and also use a designated amp only.
  2. Check the bulb and the wires also.

Mar 28, 2010 | 1997 Chevrolet Lumina

2 Answers

95' Buick regal, 3rd brake light works, tail lights work, turn signals work, stoplight switch seems to work ie 3rd brake light working, fuse is ok, changed bulbs, but no rear brake lights.


If the third brake light works and the regular ones don't, it is most likely a bad turn signal (multifunction) switch. The switch is able to kill the brakes lights to run the turn signals, and in rare circumstances does this. I've seen it several times. It could also be wiring, especially near the turn signal switch, but it is usually the switch.

Nov 25, 2009 | 1995 Buick Regal

1 Answer

Brake lights dont work (95 Tahoe) but have signal and running lights and top brake light good fuses


Sounds like the turn signal switch. Top brake light is wired direct so it will always work.

Nov 14, 2009 | 1995 Chevrolet Tahoe

7 Answers

1996 Chev Silverado K3500 dually, no brake lights


Check at the light socket in the rear, where your lights don't work. You need a test light or a voltage meter, and check to see that you have a groun there, power for your parking light, and power to the brake light. You should have power for the parking lights seeing that it works, and a ground. Just verify that your power for the brakes is getting to the bulb, or not. Just a good place to start.
And you are correct that if the third brake light works (top) your brake light switch is fine.

Aug 19, 2009 | 1996 Chevrolet C3500

1 Answer

Lower brake lights dont work,third light does


Turn signal switch 95% of t he time. Try to work your hazards, if it stuck at all will also cause this.

Feb 10, 2009 | 1998 Chevrolet Blazer

Not finding what you are looking for?
1995 Chevrolet Suburban Logo

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...