Question about 1992 Lexus Es 300
Headlamp is a sealed component you have to replace the unit cannot clean inside , Aftermarket lights for the car are about $532.00
Sorry but this is a common request to clean the insides.
Posted on Oct 16, 2010
The front cover is mounted in a way that you cannot remove it. If you are trying to clear the yellow, polish the outside with an appropriate polish. The damage is usually done to the outside. Ifnyou have done this and it is still yellow, then you need to replace the lights.
Posted on Oct 16, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Those are a sealed unit. usually once you open them up they won't reseal well and you will replace cloudiness for moisture build up. Most common to replace the whole headlight assembly as a unit. Ebay motors is a good place to find inexpensive headlight assemblies.
Posted on Mar 18, 2010
These headlamp housings are sealed and not meant to come apart. There is a headlamp polishing kit that is sold in most auto parts stores that is used with a low speed drill to polish the fog and glaze out of the plastic lens using 3 or 4 steps of fine gritted paper with a polishing compound to finish the job. If the housing has water in it or is very dirty inside there isn't a whole lot you can do to get that out of there short of replacing it. Hope this helps a bit!
Posted on Jun 25, 2010
Tips for a great answer:
Jul 27, 2011 | Subaru Forester Cars & Trucks
Locate the cabin air filter container on your Lincoln LS. Looking at the engine from the front, you will find the casing on the left side against the back firewall. The cabin air filter is mounted vertically and is approximately 6 by 9 inches and about 2 inches deep.
Remove the cowling cover by pushing in the black cover pins and lightly prying the cover off with a screwdriver. Lift the filter out of the container.
Vacuum the inside of the container to remove any dust or debris. Wipe down the inside and outside of the container and lid with a clean damp cloth, then dry it off completely.
Insert the new cabin air filter into the container and check to make sure it is seated properly. Cover the container by putting the lid back on and gently pushing down to make sure the pins click into place.
Jun 02, 2011 | 2001 Lincoln LS
Mar 07, 2011 | 2009 Ford Fusion
Jan 04, 2011 | 2004 Cadillac SRX
Dec 21, 2010 | 1992 Acura Legend
Aug 22, 2010 | 2006 Chevrolet Aveo
May 25, 2010 | 2003 Ford Expedition
Apr 04, 2010 | 1998 Buick Century
Apr 02, 2010 | 2003 Ford Escort
Aug 30, 2009 | 2005 Mazda 6
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: