Question about 1996 Toyota Tercel

2 Answers

96 tercel, blower motor only works on high speed, checked all fuses, and relays, replaced resistor, still only high speed.

Posted by on

  • Anonymous Mar 22, 2014

    blower resistor

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Toyota Expert
  • 235 Answers

The resistor bad easy to fix two screws under dash two wires to a plug comes out.easy

Posted on Nov 08, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,074 Answers

Replace switch will fix problem

Posted on Oct 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

96 geo heater blower does not work


Replace the blower motor. The brushes wear out. Any autoparts store has them. About 100 dollars

Oct 04, 2015 | 1996 Geo Metro

2 Answers

Replaced the resister and blower motor still nothing what next


Test for current to motor. If none you have either a bad fuse, bad switch or bad wiring. Nothing else left.

Feb 26, 2015 | Cars & Trucks

1 Answer

96 acura tl 2.5l. havc diagnosis only indicates a fault in the blower motor circuit. The 30 amp fuse under the hood is fine. The relay in the under dash bank is good. High speed relay is good and...


power flows from fuse to blower motor relay. From there it flows to blower motor. Blower motor receives ground from two different places depending on which speed you choose. If you choose high speed, it gets ground through the blower motor high relay. If you choose any other speed, it gets ground through the power transistor below the right side of the dash. The power transistor regulates fan speed by pulsing ground on and off based on the speed you've set. Power transistor is most common failure point in these systems

Jun 27, 2017 | Acura Cars & Trucks

2 Answers

Blower fan not working


The resistor bank is bad for slow speeds, the switch is bad for high speed. In your test, you have voltage, but the switch wont carry the amps, to run high speed. Open circuits will not blow fuses. Replace both switch and resistor bank for all speeds. Make sure to clean leaves and trash from fan housing and see if fan spins freely.

May 17, 2017 | Cars & Trucks

1 Answer

1995 GMC Sierra fan blower not working.


In the beginning you should check for voltage and ground.
The 50amp fuse marked AC powers the blower motor and the motor is grounded.
The high speed relay bypasses the resistor. So you should have power coming from the fuse and thru the high relay. Then the resistor for the other speeds gets power from the heat and ac control module which also controls the blend doors.
You may need a shop manual or repair book to get the diagrams.

Jan 12, 2013 | 1995 GMC Sierra C1500

2 Answers

Blower only works on speeds 3,4,5


there is a high blower fuse, check that first. fuse box under the hood marked HI BLO MOT 30 amps. if thats ok, maybe the blower relay is bad. marked HVAC BLOWER .....the lower sppeds use one fuse, hi speed uses another.

Sep 08, 2011 | 2005 Pontiac Grand Am

2 Answers

My 2004 grand marque's blower motor stoped working is it the blower motor relay or the resister?


If 1, 2 & 3rd speed not working, it is resistor (assuming you don't have EATC). High speed will work if fuse is ok and resistor is burned.
EATC = Electronci Auto Tem,p Control (Digital)

Nov 10, 2010 | Mercury Marquis Cars & Trucks

1 Answer

Blower motor on 96 Isuzu Rodeo does not blow on any speeds, fuse is good. I read if blower motor on works on high only it is resister, and if works on all speeds but high is relay.. so does blower motor...


if fuses are good, check for power at blower motor, when truck is running and a/c on. the resistor and the switch provide ground, so the blue/white wire should have power, and the blue/black wire should have NO power, if it does have power, then most likely the resistor is bad. if it has no power and the motor doesnt run, the motor is bad.

Oct 20, 2009 | 2000 Isuzu Rodeo

1 Answer

Fan only works on 4 and 5 settings? Is this a


Hello,

I have a 2003 Chevy Cavalier. The HVAC airflow dial only works on high setting. We checked the fuse and it's o.k.

What now?  Any estimate as to repair cost? 

Thank you

Sep 07, 2009 | Chevrolet Malibu Cars & Trucks

2 Answers

Front blower motor doesn't work, rear does


yes, all blower motors have them to control their speed, High, medium, low.. etc. I earn nothing by helping you, but my rating, a fixya rating and I will walk you through this

Dec 20, 2008 | 2005 Chrysler Town & Country

Not finding what you are looking for?
1996 Toyota Tercel Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...