Question about 1995 Dodge Ram 2500

2 Answers

How to tell if ball joints are worn on a 1995 Dodge 2500 4X4. I have a shake when braking and pulls right

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

Hi, well when lower or upper ball joints go bad your tires will wear more tread on the inside edge of the tire and you might hear a pop or clunk when turning a corner.... but from what your describing it sounds like #1rst. the shake,since its only shaking when you brake and not all the time, tells me your brake rotors are warped and need turned( brake shop can do ) #2. if the truck only pulls right when you brake.then thats going to be in the brakes also... I would have your rotors turned and put new brake pads on it and that should fix your problem....yz-maniac.

Posted on Oct 16, 2010

Testimonial: "This is very helpful and will save me money. Thanks alot"

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 22,156 Answers

Jack up under lower track control arm and then put a bar under wheel and wiggle woggle ,put a bar behind lower track control and test the fixing bushes to teh chassis

Posted on Oct 16, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2007 dodge caliber rt slap stick put new tires on 3 months ago driver side front tire is worn cant let off wheel car pulls bad to the right side of the road

The popping could be from a bad CV axle joint, or a bad wheel bearing. Better get checked, sounds very worn. Raise the wheel on a jack and watch for play. Grab wheel at 3 and 9 o'clock, and shake back and forth-watch for play. Wheel bearing? CV joint -is boot still good? Ball joints at bottom of wheel attaching point to the control arm-check this for play, too.

Apr 11, 2017 | Dodge Caliber Cars & Trucks

1 Answer

2001 dodge diesel 2500 when I brake I here a load clunk and it pulls to the left were the noise is coming from

Check the brake caliper. Take a screwdriver and compress the caliper a little bit, you can do this with the tire still on. Drive and see if the clunk went away, and comes back after you drive it, try it again, and if the same thing happens, replace the caliper. Also check your shock mounts, ball joints and tie rod ends. Replace any that are worn, (you shouldn't have any looseness in either rod ends and ball joints, they should move, but not have any play in them) make sure that all rubber mounts are not worn or loose.

Apr 23, 2015 | Dodge Cars & Trucks

2 Answers

Ive got a 06 grand caravan that shimmies and pulls hard to the right. Any guesses as to what might be the cause. Broken axel?tie rod bushing ?

There are a number of different things that could cause that problem, a bad tire, a lower or upper control are bushing, a worn out inner or outer tire rod end l, a bad wheel bering. To figure out exactly where the problem is you need to visually and physically inspect each side of the suspension by having someone move the steering wheel back and forth while you observe both sides from underneath the front of the vehicle. From there you should be able to see what is moving when it shouldn't be or not moving when it should. Also inspect your brake rotors. You may simply need new rotors and brake pads.

Aug 20, 2014 | 2006 Dodge Grand Caravan

2 Answers

When breaking, my break pedal begins to pulsate when stopping. Also, the steering wheel begins to shake when breaking.

Usually a sign one of the front brake rotors is out of round. It could also be something wrong with the abs but I doubt it.

Jul 17, 2014 | Dodge Cars & Trucks

1 Answer

What makes a front end shake on a 2004 GMC Sierra 1500 4X4?


Aug 09, 2011 | 2004 GMC Sierra 1500 Crew Cab

1 Answer

Front wheels wobble intermittantly and excessive free play

Sounds like bad ball joints or tie rod ends. Test the ball joints by jacking the car and forcefully shake the lifted wheel top and bottom. If you feel play and/or hear a clicking noise when you do that, the ball joints are at fault. Do the same but this time shaking the wheel from side to side, again if there is a lot of play and/or a clicking noise, the rod ends are worn. Either condition can be hazardous if you don't address them.

Jun 23, 2011 | 1995 Dodge Intrepid

1 Answer

I have a problem with disc brakes, 5-6days to destroy them and the car shakes ... why?

car shakes which is called shimmy shake,if brake pads been replaced wheels still shimmy, you have worn brake rotors with low and high spots,you could have bad wheel bearing, you have worn out tie rod ends and worn out ball joints,you could have tire out of balance,also you could need front end alignment.many things will cause wheels to do the shimmy shake.

Apr 07, 2011 | 2004 Jaguar X-Type

3 Answers

Dodge intrepid 2003 when mycar gets to 60mph an then when apply brakes it strats to shake when sloin doun

i think you have whats called (disk run out) have them chequed out (there warped)

Oct 30, 2009 | 1999 Dodge Intrepid

1 Answer

How do we remove wheel bearing on 1995 Mitsubishi Galant ''S''

According to the chilton manual you have to: remove the speed sensor,caliper and brake pads,brake rotor from hub assembly, disconnect the upper ball joint from steering knuckle & pull the knuckle outward. From the back of the knuckle remove the four bolts and then remove the hub and bearing assembly from the knuckle

Mar 14, 2009 | 1995 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides