Question about 2002 Ford F150 Regular Cab

1 Answer

What do I have to do to remove the switch for the power mirrow switch

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 277 Answers

  1. Disconnect battery

  1. Remove the window control switch plate.Should just pop up use a flat head to ease it up do not force up
1 Release the disconnect the control switch plate. 2 Disconnect the electrical connectors.

  1. Remove the window control switch.
  1. To install, reverse the removal procedure.

Posted on Oct 16, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to replace drivers powered mirrow, 2004 chevy impala

Easy just remove door interior unplug,remove 3 nuts holding the mirror and put back all .just don't desperate

Jun 11, 2014 | 2004 Chevrolet Impala

1 Answer

Window,locks,mirrow driverdoor not working

sounds like your not getting power to that door or your ground wire is not grounding check the wiring going into the door if it is in tact pull the left panel off and look at the window control switch more than likely the ground or power wire has came off that switch or very worse the window switch could be bad if the power or ground is not connected nothing will work on that door good luck

May 28, 2014 | 2000 Buick LeSabre

1 Answer

R& r a remote mirrow

on the inside of the door take the pannel off and remove the three nuts on the back side of the mirror. the mirror will then just pull or fall off

Apr 22, 2010 | 2004 Jeep Grand Cherokee

1 Answer

I am trying to remove the passanger door panel so I can replace my mirrow but cannot get the door panel off to unplug the mirrow wire.

to remove panel there are one 7mm screw behind small black cover that covers back side of mirror. two 7mm screws in the arm rest holes.. and two more on very bottom of trim panel. with all the screws out lift strait up on panel and it should come off

Mar 23, 2010 | 2000 Ford Windstar

1 Answer

Power mirrows do not operate. How do you get the

mite want to ck the wires that go throw ur door,,may have a broken wire there

Jan 28, 2010 | 2000 Chevrolet Silverado

1 Answer

Cut wire to drivers side vanity mirrow light. Now

sounds like you blew a fuse, check all fuses, that should be your problem. good luck.

Oct 25, 2009 | 2002 Ford Explorer Sport Trac

1 Answer



Jun 23, 2009 | 1995 Dodge Caravan

1 Answer

MY 01 4WD Blazer power side mirrors will not move / not working

You might have a bad switch or a broken cable to the mirrow???? I would lean more toward the bad switch. try cleaning it with contact cleaner or spray it with WD-40.

Jan 02, 2009 | 2001 Chevrolet Blazer

Not finding what you are looking for?
2002 Ford F150 Regular Cab Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5655 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides