Question about 2006 Chrysler Town & Country
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
cabin air filter is in the airbox behind the glove compartment,
unclip the glovebox, look behind it for a small access door, undo the latches, and voila! theres your cabin air filter! (if equipped, some model equinoxes dont have it!)
Posted on Apr 01, 2009
1. Open glove box
2. Unhook elastic retainer on right side
3. Locate the two "stop tabs", one on the upper left and the other on the right side. Push both to the left to clear their stops and the glove box will swing down, allowing access to the filter cover.
Posted on May 06, 2009
The cabin air filter is behind the glove box. The first thing you need to do is empty the glove box. (2) you need to remove the side panel that runs along the side of the shifter, it is a long panel and has on clip near the firewall, the clip will have a phillips head on it, just back it out and remove this panel. Then remove all the bolts (10MM) holding the glove box on, The glove box is will stay up because it has two hings that run into the sides of dash. All you need to do is squeeze the glove box untill it pops out and the glove box will be out. There is no need to unhook the wiring for the light bulb just let the glove box hang on the floor. Now you will see a black cover that is held on by 4 small metal clips, remove these and pull the cabin air filter out. when you reinstall the new one, make sure you put it in with the air flow arrows pointed in the right direction or else you will cause blockage. reinstall and enjoy your new heppa filter
Posted on Jun 25, 2009
SOURCE: cabin air filter
Purchase a Purolator Cabin Filter for your Impala. It comes with complete instructions. The filter is located below the windshield, passenger side. The black plastic cover must be removed to access the filter. You simply raise the hood and remove 3 plastic clips, and the washer hose from it's holders. This will allow you to remove the plastic cover over the filter
Please rate this
Posted on Nov 22, 2008
I found a chrysler blog. Pull back carpet on passenger foot well, remove white styrofoam computer protector. Remove cardboard cover (remove two screws) from bottom of glove box. On Left side see a slot with plastic cover and two sliding latches. Open and remove and replace filter. Follow reverse to finish up. It is tight fit and hard to get to for normal sized man.
Posted on Nov 23, 2008
Tips for a great answer:
Mar 12, 2015 | 2009 Kia Rio
Sep 19, 2014 | 2009 Chrysler Town and Country
Jun 10, 2012 | Cars & Trucks
Jun 06, 2012 | 2006 Chrysler Sebring
May 17, 2012 | 2005 Kia Sedona LX
Jun 05, 2011 | 2008 Volkswagen Beetle
Mar 25, 2011 | 2007 Chrysler Town & Country LX New Cars
Jul 10, 2009 | 2005 Chrysler Town & Country
Nov 22, 2008 | 2005 Chrysler Crossfire
497 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: