Question about 2006 Ford Taurus

1 Answer

Window on drivers side is not on track and wont go up. If you hold window in place and help guide it up it will go up and stay up.

Posted by on

1 Answer

Remove door panel and replace regulator/cable

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drivers side window seems to be off track and i dont know how to get into the door to repair it.


You would need to remove the door panel to access your window track. There are plastic expansion pins which hold the door panel in place. There is a tool specifically designed for this it looks like a screwdriver with a v center, slide this tool under the pin and push down on the handle and it will pop the pins out. You may need to unhook or remove your master control unit that operates your power doors/window etc in order to have enough room to access window track. There are little cheap crappy plastic guides which hold the window in place which break quite frequently you can get those from the dealer cheap (they are always in stock). Remove those guides and install the new ones and you'll be good to go

Feb 02, 2011 | 1996 Ford Explorer

1 Answer

Drivers side window falls and wont stay up on track


It sounds like the window elevator is damaged, probably the fastener that holds the window glass to the elevator rail is broken, loose or just came off.

Take the door panel off and take a closer look. If the fastener came off the glass, JB Weld would fix it.

I hope this will help you, good luck

Mar 07, 2010 | 2004 Ford F150

1 Answer

Rear window slipping down about 1 inch, but still on the track.


The Regulator will fix the problem. The tracks might also need a little adjustment.(loosen bolts move track then retighten) Try holding the window while you are rasing it you might be able to guide it up so that it will close a bit more.

May 17, 2009 | 2000 Oldsmobile Alero

1 Answer

DRIVER SIDE WINDOW OFF TRACK


you must pull door panel off (you can find the tool at any parts deals) then lift the window up with hands only it is hard but can be done get some one to hold the window glass up and check to see if any parts have fall if so put back on or replace. if not missing clean track and crank up to glass and line up. wind up and down to make sure it stay and then re-place door panel. hope this works it did for me on my 95 contour

alienphone

May 04, 2009 | 1995 Ford Contour

2 Answers

Driver side power window does not work


i would say window motor is getting weak. its the one that gets used the most. you could try to get some lubercant like wd40 in the tracks might make it move easer. but eventualy the motor will have to be replaced

Jan 14, 2009 | 2005 Dodge Caravan

1 Answer

FRONT DOOR WINDOW


Yes. I have fixed my driver side window several times. The window went all the way down and came off the track, usually because the window automatically went all the way down. The first step was to take the interior side of the door off: (1) I unscrewed the screws around the door and pull the plastic screws out. (2) I disconnected the thin metal rod that connects the door handle to the door frame to be able to pull the interior part of the door away from the metal frame of the door. (3) I unscrewed the speaker to see where the window meets the rubber track. (4) I kept the electrical wires connected so that I could use the electric window button to lower and raise the window. (5) I lowered the window down below the rubber track and loosened the screw holding the rubber track to the door. (6) I manually adjusted the rubber track around the window glass and pressed the electric window button up slowly, making sure the glass stayed on the track. (7) I put everything back in place, screwed in the screws, etc. Be careful not to let the window go all the way down, because it seems to fall off the track at that point. Hope this helps!

Nov 08, 2008 | 1992 Honda Accord

1 Answer

Olds Cutlass automatic windows


if the motor is working fine and i could be some rivits missing that hold your track up and in place for the window to operated properly check that see if there is any broken pieces lying in the bottom of your door.

Sep 14, 2008 | 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Power window


It is probably just off of the track. It could be worse. take the door apart and put the window back in the guide (track). Hope this helps.

Aug 31, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
2006 Ford Taurus Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...