Question about 1989 Oldsmobile Delta 88

2 Answers

My hazard lights flash but my left / right turning lights do not blink. Where do I find the flasher to replace it? 1995 olds 88

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 266 Answers

YOUR TURN SIGNAL FLASHER SHOULD BE BY THE FLASHER FOR THE 4 WAYS BEST WAY IS TO TURN ON 4 WAYS AND FIND THAT FLASHER AND THE OTHER NE SHOULD BE RITE BY IT AND THEY ARE THE SAME FLASHER SO YOU CAN TAKE THE 4 WAT FLASHER AND INSTALL IT IN THE OTHER ONE SO YOUR TURN SIGNAL WORKS AND THEN CHANGE THE 4 WAY WHEN YOU GET ONE

Posted on Oct 16, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

If the hazards flash the problem is not the flasher. Most likley you need a turn signal switch

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't find the turn signal flashers on my 99 Olds delta 88 but I did find the emergency flasher. Does it have one or two flashers because my signal light are not working at all HELP PLEASE!!


One flasher only. Check fuses first. Then suspect the flasher as a possibility. I have seen the hazard switch cause the turn signals to malfunction. Try pressing the hazard button in. If they work and flash as hazards you know the bulbs and flasher are ok. If the turn signals then work you have a defective multifunction switch (the hazard/turn signal/etc switch)

Aug 04, 2016 | Oldsmobile Delta 88 Cars & Trucks

1 Answer

My left turn signal recently stopped working. Before ceasing to work, the turn signal (just the left) would blink very rapidly (machine gun speed).


sounds like one of light bulbs was malfunctioning and caused the flasher unit to blink rapidly and iy burned out. Replace front and rear turn lite bulbs and see if flasher flashes. if not check fuse and replace fuse. If fuse okay replace flasher unit. Good luck

Jul 08, 2016 | 1997 Plymouth Voyager

1 Answer

I have an 02 kia sportage. my signal lights come on but dont blink outside. no lights for the signal lights come on on the dash at all. also, no hazard lights.


If the 15A HAZARD fuse in the passenger compartment fuse box is OK, power is getting to the hazard function of the flasher unit. Pressing the hzard switch should cause the hazard lights to flash. HOWEVER, there is an electronic time and warning indication system module connected to to the hazard switch lead and that may be affecting things. If the 10A TURN fuse is OK, power is applied to the turn switch (with the engine in START or RUN) and you state you can select a right or left turn. HOWEVER, the RED/WHT and RED/BLU outputs from the flasher unit connect directly to the front and rear turn lamps and the instrument cluster turn indicators so you are not getting any flasher output. Again, that electronic time & warning indication system module could be affecting things

Oct 26, 2012 | Cars & Trucks

3 Answers

I have a 1995 chevy cavalier and the turn signals just stay on and don't blink. I have changed the flasher and the multi function switch and still no luck


First, is it doing it on BOTH isdes or just on one side? Example: turn signnals flash OK when turning left, but only come on and stay on when turning right. If it is doing this, then you most likely have either a blown bulb or a bad bulb socket on the side that is not flashing. You need to check both the FRONT and REAR bulbs to make sure they are all functioning properly.
If it is doing it on BOTH sides, then you either have a bad flasher, or at least 2 bulbs burned out (one or more on each side).

Are you sure you replaced the correct flasher? The flasher for the HAZZARD lights is plugged into the convinience center under the left side of the dash. If this is the flasher you replaced, it is the wrong one.
The turn signal flasher is mounted to the driver's knee bolster bar near the steering column. It is held to the bar with a clip. (see diagram)

9_25_2011_3_20_38_pm.gif

Sep 25, 2011 | 1995 Chevrolet Cavalier

2 Answers

Where is signal flashing relay located on car? my signal light just stays on when turning left or right and does not flashr blink.


TURN SIGNAL/ HAZARD FLASHER MODULE IS BELOW LEFT SIDE OF DASH. IF THE HAZARD LIGHTS WORK YOU CAN LISTEN FOR THE CLICKING.

Jan 22, 2011 | 2002 Buick Century

2 Answers

Turn signals won't flash. They do come on but no intermittant flashing. Flasher has been swapped out. All turn signal lights come on on both sides front and back.


i think you may have replaced the hazard flasher not the turn signal flasher, the turn signal flasher is located behind the dash on the right side of the steering collum support, the hazard flasher is located in the convenience center.

Jan 14, 2011 | 1995 Chevrolet Cavalier

1 Answer

Where is the exact location of the hazard light flasher for a 1989 GMC Sierra C2500, and what is the possibility that it is the true problem behind the hazards not working? Beyond my hazards not working my...


Are you sure the right side bulbs all flash? You say you replaced all the bulbs? Why would you replace bulbs that were working? Did you have this problem before you replaced the bulbs, or after. The hazard flasher is down under the dash, left side, turn the signals on and follow the clicking noise.The hazard flasher and the turn signal flasher should be near each other, and are interchangeable. If it clicks fast, a bulb or a bad socket is usually the cause. These trucks have a lot of problems with the tail light circuit boards.

Nov 04, 2009 | 1989 GMC C2500

1 Answer

1998 buick park avenue turn signal problem


if the right side blinks normal, the flasher MAY be OK?? do the hazard lights flash all lights?it should. make sure you have all the correct bulbs. if so, replace the flasher unit. if the right side works turn it on and follow the ticking to find th eunit.

Oct 06, 2009 | 1998 Buick Park Avenue

3 Answers

97 olds 88, left turn signal not blinking.


possibly one side of your signal flasher is out turn on emergency flashers to locate one flasher then you can locate the other

Sep 12, 2009 | 1997 Oldsmobile 88

Not finding what you are looking for?
Cars & Trucks Logo

495 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...