Question about 1994 Oldsmobile Achieva Special Edition
My car didnt start and i heard 3 clicks 3 days later it started right up after i turned it off it didnt start again i changed the ignition switch, still nothing, now when i try to start it i hear alot of clicks in a row, please help.
Yeah The solenoid might be going bad, also you might want to make sure the battery terminals are not loose.
make sure you have a good connection on the post of the terminal battery. most people overlook this, thinking the battery is going bad. if all is well with that. then perhaps you do have a bad solenoid.
replacement might be in order
Posted on Jun 03, 2008
If you are hearing loud clicking, this is usually the starter silinoid. This part makes a loud clicking sound if the battery cannot supply enough amperage to operate the starter to turn over the engine. The battery must supply at least 80 to 100 Amps on a normal day to start the engine.
The battery can only be tested for amperage output with a load tester. The battery may be defective from age and use, or from the alternator going defective and damaging the battery.
Posted on Jun 03, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 16, 2015 | Cars & Trucks
Feb 16, 2013 | 1990 Chrysler New Yorker
Jan 04, 2013 | Cars & Trucks
Dec 22, 2012 | 1996 Plymouth Grand Voyager
Jan 08, 2011 | Chevrolet Aveo Cars & Trucks
not starting or turning over indicates towards multiple possibilities. It can
be issue with battery or weak battery. But if battery checks out ok, then it
can be starter issue or faulty alternator or problem with low fuel pressure or
no spark at spark plugs due to dirty spark plugs or faulty ignition
coil or injectors getting cracked or dirty and needs to be cleaned.
confirm the problem, the basic troubleshooting is required.
this link below and follow the troubleshooting:------
This will help.
Dec 14, 2009 | 1990 BMW 3 Series
Sep 27, 2009 | 1997 Honda Accord
Apr 19, 2009 | Cadillac CTS Cars & Trucks
99 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: