Question about Suzuki Verona

1 Answer

I went to start my 2004 Suzuki Verona 6 cylinder car and the key will not turn at all allowing the car to start. I have checked the fuses, and attempted to ensure it is all the way in park. The wheel is locked and no matter what I do it will not ublock and I cannot move the atomatic shifter out of park, Suggestions?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

Try turning the key while rocking the steering wheel off the lock, sometimes the lock will bind up the ignition cylinder. If this doesn't work, try a different key

Posted on Oct 16, 2010

  • jaidan_1 Feb 24, 2011

    I have the same problem and turning the steering wheel doesn't work...but i found that if your key the side where your alarm buttons are facing the steering wheel it actually works. good luck.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the starter located on a 2004 Suzuki Verona


Follow the thick red cable from the battery positive post to where it terminates, it attaches to the starter.

Mar 24, 2015 | 2004 Suzuki Verona

1 Answer

How many oxygen sensors does a 2004 Suzuki Verona have and where are they?


You would have Four of them. There are Two Upstream for Cylinders 1-3, and 4-6. Then there are Two Downstream for Cylinders 1-3 and 4-6. Look at the rear of the engine and you will see the Catalytic Converter canisters sitting there. There will be a Sensor before and after each Cat with the wiring harness up toward the top of the engine. There is a Sensor for each bank with one upstream, before the Cat and one downstream, after the Cat.

Mar 23, 2015 | 2004 Suzuki Verona

2 Answers

WHAT SIZE FUSE FOR WINDOWS AND DOOR LOCKS IN A 2004 SUZUKI VERONA


its a 5 amp fuse located under the dash under steering colum it has i think 6 fuses in a single line... check which one is blown i believe is says IA or something

Jun 13, 2014 | 2004 Suzuki Verona

1 Answer

Po106, po354,po352 codes for a suzuki verona How to fix


2004 suzuki verona: the transmission starts off in third gear..idle Here's one for you ..... My verona started doing the samething . Checked the code (crankshaft sensor A low voltage) cleared the code , but it came back ...Checked all fuses, all OK.. Started the car , while running pulled the fuse for trans control mod . Light stop flashing ... Put the fuse back in . No more shift problems ..... Tom Bowman / thomas_bowman@bellsouth.net

Mar 11, 2014 | Cars & Trucks

1 Answer

Where is # 6 cylinder on suzuki verona, far left or far right


This 2.5 is an inline 6 cyl motor. How can it have left or right?

Aug 16, 2013 | 2004 Suzuki Verona

3 Answers

2004 suzuki verona hold button is stuck


The hold button on my 2004 Suzuki Verona comes on out of no where flashing and it stops my car from excelerating. I haveto pull over and shut the car off then on in order to contiue driving. After 2k dollars in reapirs over the last 3 months...I just want to know if this feature can be disconnected???? I don't need it. Thanks

Feb 08, 2011 | 2004 Suzuki Verona

2 Answers

Cylinder 2 misfire. Can't locate second cylinder. Need diagram.


1-5-3-6-2-4 is the firing order.

right side is 1-3-5 left is 2-4-6

6 5
4 3
2 1

Jun 27, 2010 | 2004 Suzuki Verona

1 Answer

Where is the turn signal fuse located in a 04 Suzuki Verona


it is located in the fuse box the one that is inside the vehicle.

Jul 14, 2009 | 2004 Suzuki Verona

1 Answer

2004 suzuki verona 6 cylinder


It should be in the exhaust downpipe, between the engine and the catalytic converter.

May 10, 2009 | 2004 Suzuki Verona

1 Answer

2004 Suzuki Verona


There is not a fuse for the check engine light.

Mar 14, 2009 | 2004 Suzuki Verona

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...