Question about 1992 Plymouth Acclaim

1 Answer

How do you replace just the pulley on the power steering unit on a 92 acclaim v6

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

You need to remove the power steering pump and using a powersteering pulley remover, remove the pulley. The puller will grip around the flange on the center hub of the pulley. Some auto parts stores will rent these tools out to save you some money, try Autozone

Posted on Oct 16, 2010

Testimonial: "thanks a lot didnt even think of that lol Ed"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 92 chevy blazer is making a loud squealing noise sounds like my belts but its not that I've replaced the belt and the tensioner what else could it be?


Bearings in Alternator, water pump, power steering pump or even a squeal from Vacuum line, EGR diaphram or similar. Check power steering fluid level.



Now when you replaced the tensioner, did you notice more pulleys that were just "there" and not connected to anything? These are idler pulleys and are helpful in routing the belt. They have bearings too!

Pleae rate my info.

Nov 15, 2012 | Cars & Trucks

1 Answer

How do you remove the power steering pump from a 2001 Chev Blazer with the 4.3 engine?


4.2L Engine
  1. Remove the air cleaner assembly.
  2. Remove the drive belt.
  3. Install a drain pan under the vehicle.
  4. Disconnect the power steering pressure hose from the power steering pump.
  5. Disconnect the power steering cooler hose from the power steering pump.
  6. Disconnect the wiring harness from the wiring loom on the power steering pump.
  7. Remove the power steering pump mounting bolts.
  8. Remove the power steering pump.
  9. Remove the power steering pump pulley.
  10. Remove the power steering pump pulley using Power Steering Pump Pulley Remover tool no. J 25034-C, or equivalent.

Oct 30, 2010 | 1993 Plymouth Acclaim

1 Answer

Diagram for 92 acclaim serpentine belt


For the 1992 Plymouth Acclaim:
Click on the following free, direct Link. It has several Seprentine Belt Diagrams, including one to match your specific 1992 Plymouth Acclaim with the unspecified Engine: 2.5L SOHC In-Line 4-Cylinder or 3.0L SOHC V6; and the unspecified Engine Options (AC/No AC ect.)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1992/make/plymouth/model/acclaim/1992_plymouth_acclaim_drive_belt_routing_diagram.htm

Apr 17, 2010 | 1992 Plymouth Acclaim

1 Answer

Power steering pulley on ford escort van 92 has


you will need power steering pully puller you can rent them at most of your local part house or you can buy them there you will need to pull of belts then the pully hope this helps

Sep 28, 2009 | 1992 Ford Escort 4 Door

1 Answer

Replace power steering pump


NOTE: The following procedure requires the use of the GM Puller tool No. J–29785–A (1985–92), Puller J–25034–B (1993–96) or equivalent, and the GM Pulley Installer tool No. J–25033–B or equivalent.
  1. Disconnect the negative battery cable for safety.
  2. For 1996 vehicles, remove the air cleaner assembly for access.
  3. For 1993–96 vehicles, remove the hood latch and the upper fan shroud.
  4. Release tension and remove the drive belt. For details, please refer to Section 1 of this manual.
  5. Remove the power steering pump pulley using a suitable puller tool.
  6. Remove the power steering pump retaining bolts, then reposition the pump as necessary for access to the hoses.
  7. Position a fluid catch pan under the power steering pump.
  8. Remove the hoses from the power steering pump and drain the excess fluid into the catch pan.
  9. WARNING
    Be sure to cap all openings in the pump hydraulic system to prevent excessive fluid spillage and the possibility of system contamination.
  10. Remove the power steering pump from the vehicle. To install:
  11. Position the pump to the vehicle, then uncap and connect the pump hoses.
  12. Install the steering pump to the retaining bracket, then secure using the retaining bolts. Tighten the power steering pump-to-bracket bolts to 37 ft. lbs. (50 Nm). For 1996 vehicles, tighten the nut to 30 ft. lbs. (41 Nm). NOTE: On early-model vehicles where the drive belt is tensioned by pivoting the power steering pump assembly, do NOT fully tighten the mounting bolts at this time, since you will just have to loosen them again for belt installation and adjustment.
  13. Install the pump pulley using the GM Pulley Installer tool No. J–25033–B or equivalent. Press the drive pulley onto the power steering pump.
  14. Hand-tighten the pivot bolt, the adjusting bolt and the washer.
  15. Install the drive belt. On early-model vehicles so equipped, properly adjust the belt tension. For details on belt installation and tension adjustment, please refer to Section 1 of this manual.
  16. For 1993–96 vehicles install the upper fan shroud and the hood latch assembly.
  17. For 1996 vehicles, install the air cleaner assembly.
  18. Connect the negative battery cable.
  19. Refill the power steering reservoir and bleed the power steering system.
  20. Remove the jackstands and carefully lower the vehicle.
  21. Road test the vehicle, then check and top-off the power steering fluid.
Fig. 3: Removing the power steering pump pulley — 1985–92 vehicles

213c6a5.jpg
Email me at greg.bernett@mcchord.af.mil for an engine picture breakdown.

    Jul 22, 2009 | 1990 GMC Safari

    2 Answers

    I need a routing diagram for the alternator belt on my 92 plymouth acclaim


    This might help. 2 belts on here, one for AC, other for rest of pulleys.8ccb572.jpg

    Jul 12, 2009 | 1992 Plymouth Acclaim

    2 Answers

    The power steering pump bolts all seem to have vibrated out, the unit came free and i can just move it around, the pulley moves freely, everything else seems to work ok


    I don't have chrysler producs. I'll post 3.8L V6 Ford Windstar for reference. You'll get some idea.



    Removal
    ssw~us~en~file=ani_caut.gif~gen~ref.gif WARNING: USE CAUTION WHEN REMOVING OR INSTALLING DRIVE BELT TO MAKE SURE THAT TOOL DOES NOT SLIP.
    1. Using a 15mm socket or wrench on bolt attaching drive belt tensioner pulley. Rotate drive belt tensioner (6B209) clockwise to remove drive belt from pulleys.

      3.8L Engine

      e973ba6.gif
    Item Part Number Description 1 10300 Generator 2 3A674 Power Steering Pump 3 19703 A/C Compressor 4 6B217 Drive Belt Tensioner Pulley 5 6312 Crankshaft Pulley 6 8501 Water Pump 7 6B209 Drive Belt Tensioner 8 8620 Drive Belt
    Installation
    1. Install drive belt over all pulleys (except drive belt tensioner ).
    1. Rotate drive belt tensioner as described under Removal and install drive belt over drive belt tensioner pulley. Ensure that all V-grooves make proper contact with pulleys
    ---------------------------------------------------------------
    Another example
    Pulley, Power Steering Pump CII
    SPECIAL SERVICE TOOL(S) REQUIRED Description Tool Number Steering Pump Pulley Remover T69L-10300-B Steering Pump Pulley Replacer T65P-3A733-C
    Removal
    1. Drain as much fluid as possible from the power steering pump (3A674) through the power steering oil reservoir (3A697) neck.
    1. Install Steering Pump Pulley Remover T69L-10300-B on the power steering pump pulley (3A733) , and place the tool and power steering pump in a vise by gripping the small hex-head of the tool.
    1. Hold the power steering pump , and rotate the tool nut counterclockwise to remove the power steering pump pulley . Do not apply in and out pressure on the power steering pump shaft. Pressure will damage the internal thrust areas.

    Installation
    ssw~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not apply in and out pressure on the shaft. Pressure will damage the internal thrust areas.
    1. Place the power steering pump pulley on the power steering pump shaft, and install Steering Pump Pulley Replacer T65P-3A733-C. The small diameter threads on the tool should be fully engaged in the power steering pump shaft.
    1. Hold the power steering pump , and rotate the tool nut clockwise to install the power steering pump pulley on the shaft. The power steering pump pulley face must be flush within 0.25mm (0.010 inch) of the end of the power steering pump shaft.
    1. Remove the tool.
    1. Fill the power steering oil reservoir to the COLD FILL line.
    ------------------------------------------------------------------------------------------
    Steering Pump, Power Removal
    1. Disconnect battery ground cable (14301) .
    1. Remove accessory drive belt (8620) .
    1. Raise vehicle on hoist. Refer to Section 00-02 .
    1. Remove right front wheel (1007) and tire assembly.
    1. Remove power steering pump pulley (3A733) .
    1. Position drain pan. Remove power steering pressure hose (3A719) and power steering return hose (3A713) from power steering pump (3A674) .
    1. Remove four power steering pump retaining bolts (three in front, one in rear) and remove power steering pump .
    Installation
    1. Position power steering pump and install retaining bolts. Tighten retaining bolts to 41-54 Nm (30-40 lb-ft).
    1. Install power steering pressure hose and power steering return hose to power steering pump . Remove drain pan.
    1. Press on power steering pump pulley as outlined in this section.
    1. Install right front wheel and tire assembly. Tighten lug nuts (1012) to 115-142 Nm (85-105 lb-ft).
    1. Lower vehicle.
    1. Install drive belt to power steering pump pulley .
    1. Connect battery ground cable .
    1. Fill power steering oil reservoir (3A697) to proper level. Refer to Section 11-00 .

      Power Steering Pump and Bracket, 3.8L

      17c7689.gif
    Item Part Number Description 1 N607528-S2 Screw, M6-1 x 16 2 8509 Water Pump Pulley 3 W804804-S2 Screw, M8-1.25 x 35 4 N806214-S2 Bolt, M12 5 W606691-S36B Screw, M8-1.25 x 35 6 10B315 Generator Brace 7 N621939-S36B Nut, M8-1.0 8 10300 Generator 9 6B212 Accessory Drive Belt Tensioner Bracket 10 6049 Cylinder Head 11 19D624 Air Conditioning Compressor Bracket 12 W606563-S2 Bolt, M10-1.5 x 55 13 19703 A/C Compressor 14 N807273-S100 Bolt, M8-1.25 x 121.5 15 3C510 Power Steering Hose Bracket 16 3A674 Power Steering Pump 17 3C511 Power Steering Pump Support 18 W807239-S8 Bolt, M10-1.5 x 36.5 19 2888 A/C Compressor Brace 20 W806342-S2 Bolt, M8-1.25 x 23 21 W606571-S411 Bolt, M10-1.5 x 113.5 22 6C348 Idler Assembly 23 3A733 Power Steering Pump Pulley 24 N805137-S56 Bolt, M10-1.5 x 157 25 N621939-S2 Nut, M8-10 26 N807241-S36B Bolt, M10-1.5 x 132 27 6B209 Drive Belt Tensioner A — Tighten to 8-11 Nm (71-101 Lb-In) B — Tighten to 20-25 Nm (15-18 Lb-Ft) C — Tighten to 70-95 Nm (52-70 Lb-Ft) D — Tighten to 40-55 Nm (30-40 Lb-Ft) E — Press Flush with End of Power Steering Pump Shaft

    Mar 03, 2009 | 1994 Plymouth Voyager

    1 Answer

    Replacing the cooling fan on a 1993 toyota camry


    On the '92-95 V6 Camry, the radiator fan is hydraulically operated by the power steering fluid and power steering pump. If the fan isn't running as fast as it should be, check your power steering fluid level.

    Feb 03, 2009 | 1993 Toyota Camry V6

    1 Answer

    Power steering


    I have recently had to work on 3 different jeep cherokees 92, 98, 99 and have encountered a similar problem on the 92. The serpentine belt broke and needed replacement, it connects all the major functions in your motor including your power steering, fan, water pump and yes altenator...after replacing your new powersteering pump (which by the way is a real pain in the **** with having to mount the new pulley...)
    The jeep wouldnt start and I also had a drained battery so I had to use a jump box to get it started...there is no such thing as a safety for power steering...

    Dec 17, 2008 | 1996 Jeep Grand Cherokee

    Not finding what you are looking for?
    1992 Plymouth Acclaim Logo

    133 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Plymouth Experts

    yadayada
    yadayada

    Level 3 Expert

    76846 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8572 Answers

    Are you a Plymouth Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...