Question about 2006 Chevrolet Malibu

1 Answer

Need to know how to change break light bulb

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,081 Answers

Open the truck & remove philips head screw that is located to the left of the tail light housing in the trunk lid weatherstripping housing area. Next unscrew the trunk lining screw to fold back the trunk lining to get at the two plastic wing nuts that hold the light housing.

Unscrew these two wing nuts and slide the housing out, then remove the bulbs and replace. Bulbs come out similarly to how you'd replace the front headlight bulbs (unplug, twist counter-clockwise to unlock and remove old bulb, replace with new bulb and turn clockwise to lock, plug back in).

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 1991 Nissan maxima. All my lights,tail lights and brake lights work EXCEPT my left brake light. Changed the bulbs and still dont work. Can someone help?


Pull the bulb back out and look in the plug. They get corroded and the tabs will spread apart and/ or break off. Bend them back if they are there, replace it , if not.. If it looks good, you need to use an ohm meter and check continuity of the tabs to the wire. They usually break close to the plugs.

Dec 31, 2014 | 1991 Nissan Maxima

1 Answer

How to replace brake lights bulbs. When step on the brake, my window light comes on but the other lights does not come on. The park lights and signal light works, except the brakes lights don't work....


I think your break light bulb is damage and not able to work properly so you need to change it so you can give your vehicle to mechanic to repair break light bulb.

http://www.dutchgrown.com/

Jun 14, 2013 | Cars & Trucks

1 Answer

I have break light n a signal but I don't have


need to know what kind of car
make-model-year
(first thing that comes to mind is a bad turn signal switch)

Jan 19, 2013 | Cars & Trucks

1 Answer

Break lights not working properly


hi
silly thing to sugest but would you have the brake/side light bulbs in the wrong way? if you look closley at the bulbs there is two pins either side on the round silver part. 1 pin sits higher than the other, make sure you fit the bulbs in the bulb holders to match the pins on the bulb sounds complicated but it realy is an easy mistake to make.

Jan 26, 2010 | 2004 Jeep Grand Cherokee

2 Answers

My brake lights stop working . So I replacd yhe light bulb but the brake light still don't work.


I know what it is. I have the same problem. Try, when pressing the break, pulling your turning signal lever towards yourself, but not all the way to turn on the brights. If your breaks light up then you need a new turn signal switch. Part of the switch disables the break lights when that flasher comes on, but when it goes bad, it wont let the lights com on at all.

Nov 05, 2009 | 1999 Chevrolet Monte Carlo

1 Answer

Break Light Needs To Be Replaced


go to your local Auto Zone or whereever you have car parts and accessories...tell them the make/model of your car and then they will give you a light buld that fitz it...then take it home...pop it out...whether you have to lift your trunk up or not then change the dead bulb

Mar 30, 2009 | 2003 Volkswagen New Beetle Convertible

2 Answers

Any one knows how to connect break lights


have you replaced break light bulbs on both sides of the car   they may be wired threw one another  so if  u loose one  you could loose both  some times  just one or the other bulbs is burnt out

Feb 17, 2009 | 1992 Buick Roadmaster

1 Answer

Head light bulb


OPEN THE HOOD, THE BULB IS HELD IN PLACE BY A ROUND TWIST TO LOCK/UNLOCK RETAINER, PULL THAT BACK AND REMOVE THE BULB BY WIGGLING IT AND PULLING STRAIGHT BACK.
CAUTION, DON'T TOUCH THE NEW BULB, IT WILL BREAK SOON AFTER YOU TURN IT ON FORM THE OIL ON YOUR SKIN, IF YOU DO TOUCH IT CLEAN IT OFF WITH RUBBING ALCOHOL.

Aug 13, 2008 | 2003 Pontiac Grand Am

1 Answer

Break light problem


Do you know if the brake light bulbs are working? (are the bulbs good?). (the bulbs have two parts, one for brake lights the other for running lights)
If the third brake light bulb is working the brake lights should be with good light bulbs.

Jul 22, 2008 | 2005 Honda Accord

Not finding what you are looking for?
2006 Chevrolet Malibu Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...