Question about 2004 Kia Rio

1 Answer

Can I get a picture of how the timing belt should be align

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kia Master
  • 8,273 Answers

It is critical that the the belt is tight between the cam gear and from the exhaust cam gear and crankshaft gear with the gears in these positions. Please let me know if you have questions.

Can I get a picture of how the timing belt should - 8eb6db3.gif3111cf3.gif

Posted on Oct 16, 2010

  • lamontsautos Apr 16, 2011

    you should show the cam lob position also

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to put in time timing belt


I think that the alignment if the belt was done incorrectly. Every sprocket has an alignment mark on it as to the way the belt needs to be installed this needs to be checked again when the belt is tight. The modern pulleys that tighten the belt will in indicate what tension the belt needs to have. The alignment marks meet up with each other. If is important for proper alignment. It sound like you did not have the car on top dead center or TDC. Therefore it is shaking back and forth and dies in gear. In other words the pistons are not making enough compression to keep the engine running. Look up on the Internet the alignment for your engine and it will show you pictures as to what you need to do. Also next time if you mention what engine type you have e.g. 1.8 l turbo etc. will help as well. I may have had a picture of the alignment for the sprockets. Good luck. Before I forget replace the water pump as well. If the belt is bad the pump will go soon as well. The pump works of the timing belt and can cause alot of damage to the engine.

Apr 26, 2015 | 2003 Volkswagen Passat

2 Answers

On 2000 mazda protege 1.6 replaced water pump now won't start, thinking timing now out what is timing procedure?


i dont have a more detailed picture of setting the timing marks for the belt so i hope this helpsonetufshoppe_81.gif

Jan 30, 2011 | 2000 Mazda Protege

1 Answer

Do you have a diagram for 2003 saturn timing belt


The 2.2 liter engine uses colored links on the timing chain to align with the marks on the gears. You just have to rotate the engine to where the copper chain link is up on the upper right side of the intake can gear--aligned to the INT diamond on the gear. Then the silver link should be down at about 5 O-Clock on the crankshaft timing mark. The other silver link should then be aligned to the mark on the exhaust cam sprocket. See picture below.

For the 3.0 liter engine, there are marks on the belt that line up with marks on the gears. The book calls out special tools to hold the cam sprockets in alignment while the belt is put on. There is also a special tool to lock the belt onto the crankshaft sprocket. See pictures below.
Please let me know if you have questions.

2.2 liter:

jturcotte_425.gif



jturcotte_426.gif

3.0 liter:
camshaft sprocket alignment with belt marks

jturcotte_427.gif


Camshaft locking tools

jturcotte_428.gif



Crankshaft belt tool

jturcotte_429.gif


Properly adjusted tensioner

jturcotte_430.gif

Dec 08, 2010 | 2003 Saturn VUE

2 Answers

Looking for timing mark's for a 1997 camry with a 2.2 4cyl motor?


Hi,


You find the timing marks on the picture below.

moz-screenshot-2.pngaab8238.jpg



Removal
Remove auxiliary 1. drive belts.
2. Support engine.
Remove:
Engine mounting and bracket.
Timing belt upper cover [1].
3.
4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].
Remove:
Crankshaft pulley bolt [4].
Crankshaft pulley [5]. Use tool No.09213-60017.
5.
6. Ensure timing marks aligned [2] & [3].
7. Slacken tensioner bolt [6]. Move tensioner away from belt and lightly tighten bolt.
Remove:
Timing belt lower cover [7].
Crankshaft sprocket guide washer [9].
Timing belt.
Tensioner pulley.

Installation
Installation
1. Check tensioner pulley for smooth operation.
2. Check free length of tensioner spring is 46,0 mm [8]. Replace spring if necessary.
3. Fit tensioner and spring. Ensure spring is connected correctly.
4. tighten bolt [6].
5. Ensure timing marks aligned [2] & [3].
6. Fit timing belt. Ensure belt is taut between sprockets.
Install:
Crankshaft sprocket guide washer [9].
Timing belt lower cover [7].
Crankshaft pulley [5].
7.
8. Slacken tensioner bolt 1/2 turn [6].
9. Turn crankshaft two turns clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3].
Turn crankshaft slowly 1 7/8 turns clockwise until crankshaft pulley timing mark [3] aligned with 45° BTDC mark [10] on
timing belt lower cover [7].
10.
11. Tighten tensioner bolt [6]. Tightening torque: 42 Nm.
12. Install components in reverse order of removal.
13. Tighten crankshaft pulley bolt [4]. Tightening torque: 108 Nm.
Manufacturer: Toyota

Jun 25, 2010 | 1997 Toyota Camry

1 Answer

Timing belt for a mitsubishi 2003


You need to get a manual. Try the Haynes manual for your car. Try autozone; generally available for around $20-$25. This is not the type of thing that can be covered here in enough detail to do you any good. You need pictures.
General procedure is to buy new timing belt. Make sure cylinder #1 is set at TDC. Disconnect negative battery cable. Remove engine covers to access timing belt and remove timing belt Make sure all components are properly aligned and loosen pensioner to remove old timing belt. Install new timing belt. Tension belt. Double check to ensure all components are aligned properly, replace timing belt covers and reconnect battery.

Mar 04, 2010 | 2003 Mitsubishi Galant

1 Answer

How do I set a timing belt for a 1989 Mazda 929


You need to get a manual. Try the Haynes manual for your car. Try autozone; generally available for around $20. This is not the type of thing that can be covered here in enough detail to do you any good. You need a picture.
Buy new timing belt. Disconnect negative battery cable. Remove timing belt cover. make sure cylinder #1 is set at TDC. making sure all components are properly aligned and loosen pensioner to remove old timing belt. Install new timing belt. Tension belt, ensure all components are aligned properly, replace timing belt covers and reconnect battery.

Feb 20, 2010 | 1989 Mazda 929

1 Answer

Timing belt replacement for 1996 hyundai accent


You need to get a manual. Try the Haynes manual for your car. Try autozone; generally available for around $20. This is not the type of thing that can be covered here in enough detail to do you any good. You need a picture.
Buy new timing belt. Disconnect negative battery cable. Remove timing belt cover. make sure cylinder #1 is set at TDC. making sure all components are properly aligned and loosen pensioner to remove old timing belt. Install new timing belt. Tension belt, ensure all components are aligned properly, replace timing belt covers and reconnect battery.

Feb 20, 2010 | 1996 Hyundai Accent

2 Answers

Need a picture of the crankshaft and cam shaft alignment marks


Fig. 1: Timing marks are located on the camshaft pulleys as shown-1.8L engines

72dd798.jpg

Fig. 2: Make sure that the crankshaft sprocket (timing belt pulley) and oil pump timing marks are aligned-1.8L engines

a41ca11.jpg

Fig. 3: Align the timing belt pulley mark with the tension set mark, at approximately the 10 o'clock position-1.8L engines

2022a8b.jpg

I hope helps with this (reemmber rated this help) Good luck.

Dec 29, 2009 | 1997 Ford Escort

4 Answers

Timing mark locations on EJ22 subaru engine


Complete instructions including pictures for the 22 http://www.subaruvanagon.com/tom/Timing%20Belt.htm

May 09, 2009 | 1991 Subaru Legacy

Not finding what you are looking for?
2004 Kia Rio Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...