Question about 2002 Honda CR-V

Open Question

How do i change the front spring clip brakes on honda crv 2002?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
bodyguy
  • 5 Answers

SOURCE: How to change the whole headlight assembly on a 05 Honda CRV

When you raise the hood, look for a Phillips screw that holds the parking lamp in. if it is there remove screw and pull parking lamp toward front of vehicle. If headlamp and side lamp are 1 piece, there should be 2 number 10 mm headed bolts that are vertical, that hold the assembly in. The side lamp will have a stud that holds the light to the fender. You may have to pry it loose. Reverse procedure to install.

Posted on Dec 23, 2008

Ad
keemo68
  • 1263 Answers

SOURCE: 2002 HONDA CRV COLD ANTIFREEZE LEAK

this happens alot on older vehicles most often times because the coolant hose shrink and expand around a fitting. try and tighten all coolant clamps. this often is all it takes to solve the problem. you should also look to see that all seals around heads of engine show no seepage

Posted on Apr 25, 2009

  • 58 Answers

SOURCE: 2002 honda crv air filter change

Hi!

Can you specify if you are referring to the engine intake air filter or the cabin air filter?
If you are referencing the cabin air filter, the attached youtube video should help.

I originally created the video for the Odyssey, but found out after looking at my dad's CRV that it is essentially the same procedure as the Odyssey, and have also noticed that the same stands true for most Honda vehicles built between 2005 and 2009.

Happy motoring!

Posted on Jun 04, 2009

  • 9 Answers

SOURCE: 2002 honda CRV radio code

look under ashtray, or pull radio and look on it

Posted on Aug 07, 2009

  • 1 Answer

SOURCE: front end loud noise like an old bed clunk, honda crv 2000

its probably your sway bar end links, I had the same problem, I replaced both sides and the bushings and no more clunk noise

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 CRV steering wheel vibrates-shakes when I brake when I'm going faster than 30mph.


You need to have your front rotors machined or replaced with new brakes.

Jun 08, 2011 | 2002 Honda CR-V

3 Answers

Where is the fuel filter located honda crv 2002


normally for honda it should be located to the firewall close to the battery...

Jun 12, 2010 | 2002 Honda CR-V

1 Answer

2004 Honda CRV - Front Brakes running hot!!!


either caliper seized ? also when you installed the rotors did you have them machined ?

Oct 19, 2009 | 2000 Honda CR-V

1 Answer

Brakes on 2002 Honda CRV


It sounds like there is a problem with the current calipers, it would be cheaper to try replacing the current ones with a new one NOT FROM HONDA. buy an aftermarket caliper and try that. Dealerships will try to screw you over and take money from you when its not necessary.

Aug 09, 2009 | 2002 Honda CR-V

1 Answer

Remove and replace rear brake shoes on 2004 honda accord


Brake Shoes Removal & Installation To Remove:
  1. Raise and safely support rear of vehicle.
  2. Remove rear wheel assemblies.
  3. Release parking brake.
  4. Remove brake drum.
Rear brake shoe assembly


6c57c70.gif
  1. Using an appropriate brake spring tool, unhook upper return spring from rearward brake shoe.
  2. Push retainer springs IN and turn to remove tension pins.
  3. Lower brake shoe assembly and remove lower return spring.
  4. Remove brake shoe assembly from back plate.
  5. Disconnect parking brake cable from lever and remove brake shoe.
  6. Remove parking brake lever from brake shoe.

To Install:

d36458c.gif
  1. Install parking brake lever to rearward brake shoe.
  2. Secure lever to brake show with a NEW U-clip.
  3. Pinch U-clip closed.
  4. Connect parking brake cable to rearward brake shoe.
  5. Install self-adjuster lever spring on front brake shoe.
  6. Assemble clevises, adjuster bolt and upper and lower return springs.
  7. Apply a light coat of grease (Molykote 44MA or equivalent) to sliding surfaces.
  8. Install brake shoe assembly onto back plate.
  9. Install tension springs.
  10. Using an appropriate brake spring tool, unhook upper return spring to rearward brake shoe.
  11. Install brake drum.
  12. Install rear wheel assembly.
  13. Lower vehicle.
  14. Adjust self-adjusting brakes by pressing brake pedal several times.

Jul 13, 2009 | 2004 Honda Accord

1 Answer

2002 honda crv air filter change


Hi!

Can you specify if you are referring to the engine intake air filter or the cabin air filter?
If you are referencing the cabin air filter, the attached youtube video should help.

I originally created the video for the Odyssey, but found out after looking at my dad's CRV that it is essentially the same procedure as the Odyssey, and have also noticed that the same stands true for most Honda vehicles built between 2005 and 2009.

Happy motoring!

Jun 04, 2009 | 2002 Honda CR-V

1 Answer

How to change my headlights on Honda 2005 CRV


easy cheesy! Ive changed mine twice. The headlights are small bulbs. Make sure you get the right one (hi-beam vs low-beam). Unplug connector at back of bulb / headlamp unit, remove rubber weather seal (pops right ot). The bulb is held in with a small wire clip that is hard to get back on but can be done. Its spring loaded. Drop wire clip, turn bulb assya 1/4 turn, and it comes right out. Remove bulb from holder and replace. Reverse steps and VOILA!

Dec 27, 2008 | 2005 Honda CR-V

2 Answers

How to change the whole headlight assembly on a 05 Honda CRV


You have to remove the front bumper and grill etc

There are 5 bolts holding the headlight assembly in place. 2 at the top and 3 underneath.

Remove the plastic cross piece by prising out the clips and then the grille clips too then unbolt the bolts eithr side under the wheel arch. The bumper is still fastened using cips. Pull the bumper forward to unclip.

Dec 23, 2008 | 2005 Honda CR-V

1 Answer

2001 Honda Crv Bake light on dash is on


make sure your emergency brake is off all the way.

Nov 28, 2008 | 2002 Honda CR-V

1 Answer

2001 Honda CRV shock replacement


Well, there are no shocks on a Honda. There are struts. The front ones are more difficult than the rear. You will need a spring compressor kit (about $100). Once strut assembly is removed, compress spring, remove shock. Reinstall in reverse order.

Sometimes you will need to remove the brake lines from the calipers. Bleedthe brakes after reinstalling.

Jun 14, 2008 | 2001 Honda CR-V

Not finding what you are looking for?
2002 Honda CR-V Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...