Question about 2004 Dodge Ram

Open Question

Low beam headlight not working, but high beam is. but when i change the bulb still the same problem. im lossing power somewhere. Not sure if the harness itself for the bulb is making conact on the low beam side of the bulb. i know the bulb is good beacuse i check the bulb on the other side of the truck. also can not find anything under the fuss box under the hood or in the owners manual, that indicated a fuss or a relay for headlights. the ground is making good contact.and i am getting 11.03dcV on both low and highbeam.and bouncing when i switch the volt metter to ac between 30-40ac V

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Mr BrokRench
  • 1623 Answers

SOURCE: highbeam headlights work but no low beam, it is not the switch........?

Check voltage at the circuit box and test the high/low dimmer switch. Corrosion on a ground wire could also be the problem.

Posted on May 19, 2009

Ad
  • 412 Answers

SOURCE: 2003 dodge ram deisel change fcm no change.still

sounds like fuseblock underhood is faulty..front control module is on fuseblock

Posted on May 22, 2009

  • 412 Answers

SOURCE: 02 dodge caravan headlights

SOUNDS LIKE INTEGRATED POWER MODULE(UNDERHOOD FUSEBLOCK)IS DEFECTIVE..ALSO CHECK FOR CORRODED TERMINALS IN CONNECTORS ON FUSEBLOCK..HAVE SEEN THIS BEFORE AND NEW FUSEBLOCK WAS NEEDED AND REPAIRED PROBLEM

Posted on May 31, 2009

  • 18 Answers

SOURCE: 1995 dodge caravan low beam headlights don't work

look into the actual headlight switch and the wiring and the turn signal switch nand wiring

Posted on Apr 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My left my left side headlight does not work the high beam work but the low beam does not work what could cause that


The bulb has gone, or it may be the fuse. Modern cars have separate bulbs for high and low beams. They are separate reflectors, on in different locations within the same reflectors. Older models use a bulb with two elements.

Google

year make model headlight bulb

and you will end up somewhere like this for my vehicle


Get the Best Priced Lexus ES330 Headlight Bulb

Mar 30, 2017 | Cars & Trucks

2 Answers

Head light have low but when using high does not work just on one side drivers side


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Dec 20, 2015 | 2004 Nissan Sentra

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

2005 Dodge Magnum low beams do not work


Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.

Nov 18, 2011 | 2005 Dodge Magnum

1 Answer

Driver side head light does not work...the high beam does


Change the bulb. High and low beams are separate bulbs located in the headlight housing. Im not sure on the 07 but the earlier design Yukon (02)you have to pull out a pin located under the hood on the top of the light housing in order to remove it.

Jun 05, 2010 | 2007 GMC Yukon Denali

1 Answer

2002 honda civic Day time running warning on change bulbs check


High beams dont go on at all? Does the DRL light dissapear when u turn on the headlights? Now, because your high beams dont work, it more likely means that you need to replace your bulbs. Because if it would be a problem in the car itself, only the DRL system would fail. Im 80% sure that changing your bulbs will solve the problem.

Apr 20, 2010 | 2002 Honda Civic

3 Answers

I have a chevy s10 2002,the headlights do not turn on, the high beam works fine, bulbs are fine. thanks for help


If it's not the bulbs, be sure to check them, might be dual filament and the high beam wire is fine but the headlight one is shot, one bad wire would cause both headlights not to work.
Hopefully that's the problem, if not, it could be blown fuse/short in the wire. Try checking power/ground at the bulb to reduce the possible problems. If it has both with the headlights "on" then it's the bulb, if it's missing one then follow the wire for any irregularities.
They sometimes pass the wires under the flooring right near the drivers feet, which is a perfect place for water/salt to seep in and corrode wires.

Feb 07, 2010 | 2002 Chevrolet S-10

1 Answer

Right headlamp doesn't work on low beam only


in this case make sure you have voltage going to the low beam lights. 12 volts. you need a volt meter. if you do not have volatge you have to check and make sure power is going through the fuse. a bad fuse will be broke, but you can have a good fuse with no power going through it. if you have power going through the fuse you have a wiring open somewhere between fuse and whatever is between the headlight connecter.

plz check and get back i will keep checking on here on and off.

Michael
ASE certified
PLZ rate

Feb 09, 2009 | 2004 Acura TL

Not finding what you are looking for?
2004 Dodge Ram Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...