Question about Chevrolet Aveo

Open Question

Machineist mixed up cam caps i see there numbered but i dont know which order front to back etc they go

Posted by on

4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 159 Answers

SOURCE: Car with camshafts removed, what order do the cam caps go in?

reverse the order to 1234 on intake with arrows toward the front of the engine

Posted on Jun 05, 2009

  • 2049 Answers

SOURCE: what is number one on distributor cap of a 1993

Here's the info you need...


Posted on Nov 29, 2009

  • 1975 Answers

SOURCE: i need to know how

Here's a diagram for you that i think will help. Can't remember the rotation of the rotor but if you match up the numbers you should be all set. Hope this helps you and good luck.


Posted on Apr 30, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I replace the sparkplugs

Buy the appropriate spark plugs from your auto supply store. They will need to know your engine size (# of Cylinders Etc.) as well as the info you have supplied here (yr make model) Gap the new plugs to manufacturer specs. Follow the plugs wires from the distributor to the plugs. Remove plug wire and unscrew one plug at a time so you do not mix up the firing order and replace with the new plug. Put wire back on. You may want to replace the distributor cap and rotor at this time as well. Be sure, again not to mix up the order of the wires. Mark them in some way so you know how to put them back on the new cap in the same order they came off of the old cap. Medical tape and a numbering system works well. Also use a felt pen to mark the old and new caps to correspond to the numbers on the tape. Does this help? Let me know. Thanks.

Dec 26, 2010 | 1999 Chevrolet Cavalier

1 Answer

We know the firing order for plugs and wires but we need to know where #1 2 3 etc start from

Your number one cylinder is always the front most piston, usually left front of the engine. If you follow the wire back to the coil pack or dist, whatever you have, you will have the number one, then you know the order, just go by it, and it should give you the rest of the pistons. A V6 sometimes goes, 123 on the left, and 456 on the right, but not always. They can cross over, left, right, etc. The 4 cylinder overhead cam engine is 1234, the firing order is cast into the engine block on all engines. I don't know what engine you have , but hope this helps.

Jul 01, 2010 | 1991 Chevrolet Corsica

2 Answers

I mixed up all my spark plug wires would like to know in which order do they go

on the back of the block the actual engine feel u will feel a bunch of numbers thats the fireing order first u can look on thev label around the raditator there should be 1 2 or even 3 stickeers saying what kind of ncar how many liters the fireing order and thats what u want

Feb 07, 2010 | 1989 Cadillac Sedan DeVille

3 Answers

How do i set timing on 1998 chevy truck 350 vortec

number 1 plug wire should be pointing towards the front drivers corner . drivers side piston order is 1-3-5-7 front to back .passengers side front to back is 2-4-6-8 then the firing order is 1-8-4-3-6-5-7-2 . if you pull the # 1 spark plug and put your finger in the hole /remover power wire while doing this at the dist.bump the engine when you feel a rush of air that's the compression stroke when the piston is at the top of it's compression stroke . pop the cap look to make sure the rotor is pointing at the # 1 piston roughly and place cap back on so the # 1 terminal is over the wire end of the rotor contact tip and work clockwise around with the firing order and hope this helps .if it still dont want to run then you may have jumped timing chain or stretched they will jump out of time and cause a headache.

Nov 06, 2009 | 1998 Chevrolet K1500

1 Answer

I have a 1991 chev truck,4.3 v6 and the plug wires got mixed up on the cap after a tuneup,I need a fireing order,Thanks Rich

the firing order is 18436572 drivers side of engine front plug is number 1 and pass front is 2

Jun 30, 2009 | 1994 Chevrolet C1500

1 Answer

Car with camshafts removed, what order do the cam caps go in?

reverse the order to 1234 on intake with arrows toward the front of the engine

May 22, 2009 | 1998 Ford Contour

1 Answer

Back cam will not rotate

oops sounds like you had the cam in the wrong place and bent a valve or two unless u mixed the cam caps and have them in the wrong spot that will bind the cam and lock it down by the way that is a dodge engine same as a neon

May 06, 2009 | 1996 Mitsubishi Eclipse

3 Answers

4.3 L vortec firing orcer and wiring diagram

you need the firing order?? it is 1, 6, 5, 4, 3, 2 clockwise. Number one on cap is forward position, or 6 o'clock position, just left of the hold down bolt.

Jan 22, 2009 | 1995 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides