Question about 2006 Acura RL
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This is really easy! Please follow these directions:
Turn the key ON
Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.
Turn the key OFF.
Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.
Turn the key ON; do NOT start the engine
Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.
Release the black trip meter reset stick.
This completes the reset procedure, and the light will be back on in 5,000 miles, to remind you of you next oil change.
Hope this helps, and thanks for choosing FixYa. Happy Thnkasgiving!
Posted on Nov 25, 2008
Previous Post dead wrong...
Turn ignition to "ON" position. Make sure odometer is on trip setting not on total vehicle mileage setting.
Turn ignition OFF
Push and hold odometer button while turning ignition to "ON" position. HOld for about 4-5 seconds until maintenance light goes off. Turn ignition OFF. Start up vehicle. There should be no more maintanence light.
Posted on Jun 27, 2009
To reset MAINTENANCE REQUIRED light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition on and hold buttons for 10 seconds until indicator resets.
Posted on Sep 06, 2009
The SRS computer needs to be reset, if you dont have a repair manual i would first suggest finding one for each car. The basic principal is that you jumper the diagnostic plug (under the glove box in the RL). The next step I believe is that you must depress the TCS button, then while holding it down you turn the key to on, continue to hold the TCS button for 15 sec and then let off. The check engine light should then blink really quick a few times and that means its reset. Im reciting this from memory so dont quote me on it. I have done it before for the RL but not the integra, id really suggest finding a repair manual though.
Posted on Sep 19, 2009
Tips for a great answer:
Feb 01, 2015 | 2006 Acura RL Technology
Jun 05, 2010 | 2001 Acura 3.5RL
Jan 17, 2010 | 2000 Acura 3.5RL
Dec 15, 2009 | 2005 Acura RL
Dec 07, 2009 | 2006 Acura RL
Nov 25, 2009 | 2006 Acura RL
640 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: