Question about 1999 Ford Windstar

1 Answer

I keep popping a fuse which then does not allow me to get out of park....

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,422 Answers

ITS NOT ENOUGH INFORMATION LOOK TO SEE WHAT IS ON AND OFF SO WHAT WORKS RIGHT AND WHAT DOSEN;T WHAT FUSE IS IT PIER.J

Posted on Oct 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 buick park avenue keeps blowing the stop lamp fuse, cant figure out why.


Yes. Thus is a short. Check the switch wiring and bulbs. Does the car have a trailer hitch with trailer wiring. Those are a common source of shorts.

Oct 13, 2016 | 1998 Buick Park Avenue

1 Answer

2003. Why does ITPCM/BATT fuse 8 keep popping?


thee is a dead short after the fuse
could be a wire to ground or a failed component that the fuse allows power to

Oct 04, 2015 | Cadillac DeVille Cars & Trucks

1 Answer

Parking lamp relay


Check light bulbs or tow light harness for short Sometime an incorrect bulb cause a fuse to pop make sure corrct bulbs are installed .

Dec 11, 2013 | Dodge Durango Cars & Trucks

2 Answers

My shifter locks when i've just turned the car on and try to shift from park to drive. It moves to the right a little bit, but will not move down into reverse. Ideas?


There may be a malfunction in the shift interlock sys.
This sys. keeps the shift from being moved from park
unless the brake peddle is depressed. There are 5 fuse's, directly or indirectly related to the interlock system. Fuse #6 15amp in the fuse box under the hood on the left side. The next 4 are in the fuse box
behind the left side of the dash. Fuse #3 15amp/fuse
#18 15amp/fuse #16 20amp and fuse #4 15amp.
Check these first, before you move on to the brake
light switch, under the dash at the brake peddle.
And the shift lock solenoid, under the console left of
the shift lever. Hope this helps.

Mar 22, 2010 | 2007 Subaru Forester 2.5X L.L. Bean...

2 Answers

2009 e250 keeps blowing 10 amp parking fuse then


if it keeps blowing the fuse you have a short in the wiring

Sep 11, 2009 | 2009 Ford Econoline Cargo

1 Answer

Stuck in park, Land Rover Discovery 2002


well the brake also has a switch by the floor that controls a actuator that allows you to remove shifter from park check fuses again to make sure they dont continue to pop if they do you might have faulty wiring somewhere in circuit

Aug 15, 2009 | 1996 Toyota Corolla

1 Answer

Everytime I put a fuse in the fuse box they pop.


they probaly keep popping because the fuse is to small and the placement can be found rite on the cap or your car manual

Mar 02, 2009 | 1983 Chrysler Fifth Avenue

1 Answer

10amp fuse keeps popping


check each of the terminals of those bulb you mentioned. wonder if there's a relay associated to this circuit, check for short if this is the case. remove all the light bulbs [of course - the dash may not be necessary (it's a PITA) & let's hope that it's not the culprit]. visually inspect those bulbs & replace if something unusual. put back the relay if it has no short, turn on the switch, let's hope the dash lights up & it won't blow the fuse anymore, otherwise look for uninsulated wire touching the chasssis or ay metal part of the car. you may continue replacin the bulbs.

Nov 24, 2008 | 1991 Dodge Ramcharger

2 Answers

Grand am v6 1997 ets 20amp fuse keeps blowing


Sounds like a short in the wiring somewhere. what does the fuse go to?

Nov 22, 2008 | 1997 Pontiac Grand Am

1 Answer

Dash lights and parking lights


it could be if you have towing pakage the wiring mite have a short

Nov 19, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1999 Ford Windstar Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...