Question about Dodge Neon

Open Question

Need to know the rear hub nut size for a 2002 Dodge Neon with drum brakes

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 718 Answers

SOURCE: How do you get the rear brake drum off?

2003 dodge neon sxt

Here are the steps;
) Park on a level surface. safety
) Block all the other wheels. safety
) Put the vehicle gearshift in PARK. safety
) Release the handbrakes.
) Slightly break the rear wheel lug nuts seal while on ground. Just loosen do not remove.
) Jack up the rear wheel.
) Check to see the wheel will turn so you know the brake shoes are not binding against the drum.
) Now you can remove the lug nuts and wheel.
) Remove the drum. Some times the drum has frozen on with rust. You may have to use a hammer and hit along the drum near the outer edges to break it free.

Posted on May 08, 2009

frcs68
  • 1605 Answers

SOURCE: left rear wheel locking up. have drum off, need diagram of brakes

back the adjuster to the point you can just trun the caliper or the drum with little force. you will hear a little rubbing sound from the brake pad.

Posted on May 19, 2009

  • 15 Answers

SOURCE: VW Jetta torque setting and hub nut size????

129 ft/lbs. Per Bentley...I'm pretty sure it's a 30 mm 12 point socket.

Posted on Jun 01, 2009

pippall
  • 1486 Answers

SOURCE: 2001 dodge neon rear drum removal wheel cylinder

You need a pullers to get it off.But if your lucky putting a screwdriver between the drum and back-plate and pize it when your hitting with a hammer it may come off.good luck.

Posted on Jun 03, 2009

  • 62 Answers

SOURCE: I have a 1998 dodge neon, the rear brake/ turn not functioning

Check all the fuses.

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace the rear wheel hub on a 2003 Kia sedona. All I can find is directions on front not back.


Wheel Bearings

Print
Adjustment

2002-05 Models
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:

    Rear wheel Brake drum Hub cover Cotter pin Lock nut cover
  3. Adjust the locknut to achieve wheel bearing play of 0.001-0.006 inches (0.025-0.152 mm).
Removal & Installation

2002-05 Models
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Remove or disconnect the following:

    Rear wheel Brake drum Hub cap Cotter pin Lock nut cover Lock nut Wheel bearing retainer washer and the outer wheel bearing Hub assembly Grease seal Inner wheel bearing
  3. Clean and inspect the wheel bearings and races for unusual wear or damage. Replace parts as necessary.
To install:
  1. Pack the wheel bearings with grease for assembly.
  2. Install or connect the following:

    Inner wheel bearing Grease seal Hub assembly Lock nut. Adjust the locknut to achieve wheel bearing play of 0.001-0.006 inches (0.025-0.152 mm). Lock nut cover Cotter pin Hub cap Brake drum Rear wheel

Apr 03, 2015 | 2003 Kia Sedona

1 Answer

How do you change rear brake drum on 2002 dodge ram 3500 dually


you have to get under truck look for access hole at backing plate you need brake adjusting tool to turn adjusting star wheel until drum brakes away from brake drum so you can remove the brake drum.you need tools to remove rear wheel from drums you need a large breaker bar and large hammer and a large socket remove spindle nut.

May 18, 2013 | 2002 Dodge Ram 3500 Truck

1 Answer

Replacing rear brakes on 2002 dodge neon


brakes are easy it dont matter if they have a calipar or drum just take you time and pay special attention to where the nuts and bolts go as well as any clips good luck

Sep 26, 2011 | 2002 Dodge Neon

1 Answer

Ok, my 2002 Dodge Neon is having brake problems we replaced the rear master cylinders and brake bad. But, the rear right drums catches the brakes when you free spin the drum with your hand at one point. We...


You need to manually adjust the brakes after putting new brake shoes on. The automatic adjuster has adjusted for wear in the old shoes which will make the new shoes too tight.

Dec 18, 2010 | 2002 Dodge Neon

1 Answer

2002 dodge neon doe it have disc brakes in the front and disc in the rear?


The base model of the 02 neon has disc front brakes and drum rear brakes.

Oct 10, 2010 | 2002 Dodge Neon

1 Answer

Can you tell me if it takes special tools to remove the rear brake hub and brake line


No, there are no special tools required beyond everyday hand tools.

Raise the vehicle.
Remove the rear wheel and tire assembly from the vehicle If the vehicle is equipped with rear drum brakes, remove any retainer clips from the wheel mounting studs, then pull the brake drum off the hub and bearing.
If the vehicle is equipped with rear disc brakes perform the following:
Remove the two guide pin bolts securing the front disc brake caliper to the steering knuckle.
Remove the disc brake caliper from the knuckle and brake rotor.
Hang the caliper out of the way using a wire hanger or cord. Do not support the caliper by letting it hang by the hydraulic hose.
Remove any retainer clips from the wheel mounting studs, then pull the brake rotor off the hub and bearing.
Remove the dust cap from the hub and bearing assembly
Remove the retaining nut, then the hub and bearing from the knuckle's spindle

Oct 10, 2010 | 2004 Dodge Neon

1 Answer

2002 dodge neon right rear wheel locked up. Is it the drum brakes?


THE BRAKE LINING ON ONE OF THE SHOES MAY HAVE LET GO AND OVERLAPPED THE OTHER ONE,CAUSING IT TO BIND UP..IF NOT,TRY OPENING BLEEDER SCREW AND SEE IF IT RELEASES..IF IT DOES,REAR BRAKE HOSE MAY BE HOLDING WHEEL CYLINDER PISTONS OUT KEEPING BRAKE ON..YOU'LL NEED TO REMOVE AFFECTED DRUM AND INSPECT BRAKES AND REAR HUB/BEARINGS

Jul 30, 2009 | 2002 Dodge Neon

1 Answer

Left rear wheel locking up. have drum off, need diagram of brakes


back the adjuster to the point you can just trun the caliper or the drum with little force. you will hear a little rubbing sound from the brake pad.

May 19, 2009 | 2000 Dodge Neon

2 Answers

How do you get the rear brake drum off?


2003 dodge neon sxt

Here are the steps;
) Park on a level surface. safety
) Block all the other wheels. safety
) Put the vehicle gearshift in PARK. safety
) Release the handbrakes.
) Slightly break the rear wheel lug nuts seal while on ground. Just loosen do not remove.
) Jack up the rear wheel.
) Check to see the wheel will turn so you know the brake shoes are not binding against the drum.
) Now you can remove the lug nuts and wheel.
) Remove the drum. Some times the drum has frozen on with rust. You may have to use a hammer and hit along the drum near the outer edges to break it free.

May 08, 2009 | 2002 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...