Question about 1999 Chevrolet Blazer

Open Question

There is a clunking sound under the dash on the passenger side whenever I go over rough road. It sounds like something is loose but I can't find it under the dash or the hood.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: There's a clunking sound that

Mine was a clunking sound on small bump on the road, Dealer found the problem after the second visit, it was a default in the electrical power steering. it has to change the steering column.

Posted on Jul 12, 2008

edwardjwoods
  • 372 Answers

SOURCE: Clicking noise coming from under

You have a blend door motor that bad. The clicking noise is probably the motor turing and grinding the gears...Prob should take too a shop for a diag to be sure...Some of them things are pretty hard to get to

Posted on Aug 06, 2008

  • 255 Answers

SOURCE: Cavalier rear suspension clunks

HI, this noise can be caused by worn shocks,even if the bushings look good, you can remove one of them and check if is hard to constracts ,if not they must be replaced,

Posted on Jan 04, 2009

  • 20 Answers

SOURCE: leaking water from front passenger side, under dashboard

It is either condensation water from the A/C unit that should go out a drain tube to the outside (only if A/C or Defrost is on) or a leaky heater core. If it is a heater core you can usually smell a coolant smell and the water will be warm and your windows will fog up inside. Heater core is more common. Joe ASE Master Tech

Posted on Mar 05, 2009

  • 2 Answers

SOURCE: Clunk sound when turning left in 2005 Chev Malibu

I have 3 2005 Malibus - 1 Maxx LT, 1 Sedan LT, and 1 Sedan LS. All three needed to have the steering rod replaced by 50K miles. You'd feel a muted clunk through the wheel when turning. The other light clunk issue I had with the Maxx was I hit a parking curb and it broke the lower radiator bracket. In certain bumps you'd feel a light clunk. A new $22 bracket fixed the issue and now I make sure I never pull too far into the spaces in the garage at work.

Posted on Apr 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clunk noise passenger rear


when does it make the clunk sound? ie; 1) when driving over bumpy road, 2) when making a right or left hand turn, 3) when accelerating or 4) when coming to a stop.

Jul 06, 2014 | 2000 Ford Taurus

1 Answer

Noise clunk


Melinda, since it is under warranty and you have already taken it to the dealership there is record of the complaint and attempted repair. Take it back to them. As long as it is covered under the warranty it shouldn't cost you anything.

Dec 04, 2013 | 2012 Dodge Journey American Value Package...

1 Answer

Resolving a clunking in front end of a ford tarus 2002 a consistant clunking over bumps. sounds like the front end is going to come apart.


Lower control arm bushings and lower ball joints can cause a noise like this. But I have fixed a few that sounded like the front end was falling offf. It turned out to be the air conditioning plenum under the dash. There is a tube that comes loose some how. this tube stretches all the way across the dash. you can see part of it under the drivers side, it disappears in the center. I take a piece of thick foam and wedge it under the tube towards the center column. Most times this gets rid of the noise or most of it. No one wanted to pay to take apart the dash to fix the passenger side.

Jul 02, 2011 | 2002 Ford Taurus

1 Answer

Truck has clunking sound when driven on rough road or bumps 92 ford 2 wheel drive 302 super cab


Is the clunking form the body reaction to the bumps or is through the transmission. What ever sounds like some rubber is missing. Look at frame to body mounts, spring to frame mounts and anti roll bar mounts, basically anything that isolates something that moves from something that should be solid. On the transmission look at rubber prop couplings and universal spiders along with gearbox and engine mounts. Finally check the shock absorber mounts for wear

May 11, 2010 | 1992 Ford F150 SuperCab

2 Answers

Have a rattle underneath my 1992 buick roadmaster when you are on rough road - I have checked for something loose, brakes,tailpipes,park brake cable,mufflers, linkage on transmission,swaybar,ball joint,...


my roadmaster has dynaride, the rubber mounts on the compressor were bad and cause a rattle on rough roads. sound like under rear driver side passenger

Feb 05, 2010 | 1992 Buick Roadmaster

1 Answer

Driving over bumps and rough roads I hear and feel of loose clattering or cliking sounds,as something is loose


most likely your problem is the exhaust system bumping. If it sounds like it is coming from front of vehicle, it may be struts clunking. Rear shocks can also do this if they are worn.

Oct 06, 2009 | 2005 Cadillac Deville

1 Answer

Rattle/clunking in the dash


I had the same problem drove me near nuts ,lift up hood on outside back at hinge ,hits on cowl put piece of rubber or cork under hinge rattle will stop. Took me 2 months to find this problem. good luck

Mar 07, 2009 | 2000 GMC Sonoma Extended Cab

1 Answer

2001 Tarus clunking sound


very common problem is the sway bay end links that attach to the strut from the sway bar. They sound like a light chuckling knock over bumps. The bushings that hold the subframe up wear or the bolts loosed due to the bushings wearing. usually the rear ones The bushings are 2 piece ,upper and lower Tighten with 18mm socket

Feb 17, 2009 | 2000 Ford Taurus

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...