Question about 1991 Ford Econoline
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 97 ford 460 no spark
The module on the dist would be my first thing to look at and can be tested for free at most auto parts stores. also mice and other rodents tend to like to eat wires on unatended vehicals-might look around to see if any made a meal out of them.
Posted on Aug 26, 2009
Testimonial: "thank you found modual was bad , good info !!!"
Posted on Mar 23, 2010
Theres 2 pumps one in the tank, lift pump, and one in the chassis rail under the driver side. The one in the tank is cheap, the one in the rail is not. The one in the tank only produces low pressure to prime the main pump and if it is broken, may not cause that much of an issue except when starting. the one in the rail is a no-start if it fails. The idea is that the rail pump can supply high pressure for the injectors, so a fuel pressure test at the injector rail will determine which pump is playing up. Hope that helps Tim
Posted on May 26, 2010
first hit the fuel tank with rubber mallet where you might think the pump is. it's best to do this with someone trying to start the truck. if the pump comes on, it is definitely the pump. you can also check at the relay look at the relay and it should show a diagrahm. jump the leads with the switch, not the coil, first check your fuses and check for power at the relay
Posted on Jun 14, 2010
Tips for a great answer:
Mar 24, 2018 | Ford Cars & Trucks
Apr 17, 2014 | 1987 Ford Econoline
Jul 24, 2012 | Ford Cars & Trucks
Aug 01, 2017 | Ford E-350 Cars & Trucks
Jul 07, 2010 | 1988 Ford Econoline
Mar 23, 2010 | 1989 Ford Econoline
Feb 24, 2010 | 1990 Ford F350
Dec 01, 2009 | 1987 Ford Econoline
Jun 10, 2014 | 1991 Ford Econoline
84 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: