Question about 2004 Chevrolet Impala

1 Answer

Low tire pressure light is on but they are fine. how do i reset the lights

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 120 Answers

Vehicles with tiremonitor systems are sensitive.Make sure tire presure is set to the spec on the drivers side door jam. If you have your owner manual the reset procedure will be in there. If you have access to a scan tool you can reset it with that. However if your sensor is bad in any of the tires the light wont go out. National tire and battery or dealership has this tool to check

Posted on Oct 24, 2010

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
DAD5bbbbg
  • 111 Answers

SOURCE: low tire pressure light is on all tire pressure is

Turn off the radio and turn the key to the on postion. push the bottom knob ( to turn the station). Hold it in intell the info comes on. in the window it will show all the things you can reset. using the arrows to the right of the knob find tire reset the push on the station knob. this will reset it. then go back to the arrows and find end. push on the knob one more time and you will be done.( you have to make sure the radio is off). I hope this helps.

Posted on Feb 28, 2009

  • 1861 Answers

SOURCE: Reset the Low Pressure Tire Indicator Light

If you have the silver-metal valve cores, on the rims, there is NO reset proceedure. Under the valve cores is a transmitter, which is battery powered. It sends a "yes/no" signal to the tire pressure ECM. Note that ALL 5 tires transmit to the ECM. The signal is "at or above" the specific target pressure needed, or is is below the target pressure. What to do: get a GOOD tire pressure gauge, not those cheap ones that look like pencils. Set the tire pressures to the specification, INCLUDING the spare. Your light should go out. If not, there is the possibility that one of the sensors is innoperative, and that will involve a trip to the dealership, to get it replaced under warranty. Try the tire pressure resetting, adn don't forget the spare. Get back to me if this works. Glad to help, and thanks for choosing FixYA.

Posted on Nov 11, 2008

  • 1 Answer

SOURCE: Low Tire Pressure Indicator

I took my car to the dealer and they solved it for me, I am not sure what exactly they did, but I know it involved me changing some tires.

Posted on Dec 16, 2008

  • 29 Answers

SOURCE: low tire pressure idiot light

Your nissan also has a tire monitor on your spare tire if your spare has low pressure and the other 4 tires have correct pressure the light will stay on . after you ajust the spare also the light should go away.

Posted on Mar 24, 2009

  • 1 Answer

SOURCE: I WANT TO RESET THE LOW TIRE PRESSURE LIGHT FROM M...

I want to reset the low tire pressure light on my 2003 chevy impala. I go into the stereo disp. button, but the option is not there. How can reset it without using the stereo?

Posted on Jun 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buick rendezvous low tire pressure light


After checking/adjusting all tire's pressure (including spare, some spares have a tire pressure sending unit), turn ignition "ON" (NOT "START", just the position key is at when you are driving).
Press the MODE button until LOW TIRE PRESSURE HOLD SET TO RESET is displayed.
Press and hold the SET button until a chime sounds and TIRE PRESSURE RESET is displayed and a chime sounds 3 times.
Release the SET button and TIRE PRESSURE NORMAL is displayed.

Mar 06, 2014 | Cars & Trucks

1 Answer

We got the car a few months ago. Low tire pressure light came on during the first cold snap. One tire was couple lbs low. We reset it. Few days later the light came on again. Tires were fine. We reset it....


Hello: If the tires are programmed to the correct position on the truck the the tire that is showing low may have a bad sensor. The battery in the sensor only lasts so long (maintence item) When the light?message comes on is a tire actually low?

Jan 11, 2011 | 2005 Buick Rendezvous

1 Answer

Low tire pressure light comes on once temperature outside dropped. Had checked..tire pressure fine. How do I reset to make indicator light go away?


What was the pressure.? the tire pressure specification should be on the drivers door jamb. It needs to be set cold. The light will go off when each tire signals that it has the proper pressure.

Nov 10, 2010 | 2009 Honda Fit

2 Answers

The low tire light comes on on the dash. I checked my tire pressures and they are fine. I can reset the light but about 2 or 3 minutes into driving it comes back on and tires are fine. What else can cause...


Tire light should blink 3 times to ensure reset. Overinflation will set it off. Those tires should be at 32psi. Don't forget the spare if it's a full size, it has a sensor too.

Sep 04, 2010 | 2004 Toyota Highlander

3 Answers

Flashing exclamation point


definetly tire prssure low light. you can reset it by scrolling through the mileage and trip meter once you get to the screen for the tire preesure monitor hold the button down till it flashes and it will reset. make sure you check all your tire pressures first.

Aug 07, 2010 | 2004 Ford Freestar

1 Answer

Changed right front tire now reads zero on dash light is on


Your tire pressure monitor needs to be reset whenever you change or rotate your tires...

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 24, 2009 | 2008 Chevrolet Tahoe

1 Answer

How do you reset low tire light


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 20, 2009 | 2005 Chrysler PT Cruiser

2 Answers

Low tire light came on - tire pressure ok


Because of changing outside temps this happens, just hold reset button on left side of dash until it reads tire pressure 100% again, just make sure your pressure is right before you do it. this is the same for oil changes and the like.

Apr 26, 2009 | 2001 Buick LeSabre

1 Answer

What does it mean when you reset the low tire sensor on a 2002 toyota Sienna and comes back on? The tire pressure has been checked and its fine.


You have to "Teach" the tire sensors to the correct pressure. The 02 Sienna does not measure the actual PSI tire pressures, it measures the RPM of the tires. with the tires set to specs, the rotation RPM is "x". If a tire goes low, the rotation RPM would bt "y", and that will light the light.

The proceedure: Set the tires to specs with a known good pressure gauge. The ones that you can put in your pocket, that looks like a pen, are alway sincorrect. Get one with a needle reading. Set the tires correctly. Now, press the reset button, hold it until the light blinks 3 times. Drop it into gear, and DRIVE IT. 8-12 miles, above 19 MPH, and UNDER 61 MPH. This will re-teach the ABS computer the correct values.

Apr 01, 2009 | 2002 Toyota Sienna

2 Answers

Low tire pressure idiot light


Your nissan also has a tire monitor on your spare tire if your spare has low pressure and the other 4 tires have correct pressure the light will stay on . after you ajust the spare also the light should go away.

Mar 24, 2009 | 2007 Nissan Pathfinder Off Road

Not finding what you are looking for?
2004 Chevrolet Impala Logo

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...