Question about 1999 Jeep Grand Cherokee

2 Answers

Looking for the location of the camshaft sensor

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 277 Answers

The Camshaft Position Sensor is bolted to the top of the oil pump drive shaft assembly.

Posted on Oct 15, 2010

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 84 Answers

The sensor should be on the drivers side bell ousing of the tranny. Get under the vehicle on this side and reach your hand up over the bell houseing and you should be able to feel it. Its not easy to get at to relace but with a little patients you can do it. You can also follow the wire in behind the motor on the drivers side along the fire wall down the lower wall to the bell housing to locate it.

If I can help more please feel free to ask!

Joe

Posted on Oct 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the cam position sensor on a 97 Hyundai elantra


Hi Zolo,here's a link to your camshaft position sensor. Duralast Camshaft Position Sensor SU4117 ReadReviews onDuralast SU4117 The Camshaft Position Sensoris located: Under hood, passenger side, upper engine area, mounted in engine block .Here's another on how to replace it.
Repair Guides Electronic Engine Controls Camshaft Position cmp Sensor...

Sep 28, 2016 | Hyundai Cars & Trucks

1 Answer

Location of camshaft position sensor on a 2002 oldsmobile bravada


4200 vortec, Its located in front of engine, its just below the engine oil fill cap, right by the coolant hose is the camshaft position sensor (CMP)
If your looking for the camshaft positioning actuator solenoid its location is on the exhaust manifold side on the top right corner of the cylinder head, if your looking at the motor from the exhaust side, its behind the power steering fill. You have to remove the belt to loosin the power steering pump through the pulley then kind of push it aside as you take out the camshaft actuator solenoid.

Feb 29, 2016 | 2002 Oldsmobile Bravada

1 Answer

Location camposition sensorslincolnls3.9


Hi James,i have a 2004 Lincoln LS with the 3.0 engine,mine is Cashmere in color,here's a link to your camshaft sensor. Repair Guides Component Locations Camshaft Position cmp Sensor AutoZone com Here's what they look like,2 of them. Camshaft Position Sensor at AutoZone com Best Camshaft Position Sensor...

Nov 13, 2014 | 2003 Lincoln LS

1 Answer

Where is the camshaft position sensor located in a


The camshaft position sensor is located on top of the engine near the ignition coils.
The camshaft position sensor is located on top of the engine near the ignition coils.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The camshaft position sensor is either located near the top of the engine, passenger-s side, or on the right side of the engine near the ignition coils.
The camshaft position sensor is located on the engine near the camshaft pulley.
This sensor is located at the front of the engine near the camshaft gear this is what I got 6 different locations manual covers 99-05

Oct 10, 2014 | Cars & Trucks

1 Answer

Camshaft sensor location


look on the rear of the camshaft bearing area or near the cam drive sproket..

Dec 14, 2013 | Ford Cars & Trucks

1 Answer

Does a 2003 pontiac sunfire have a cam shaf scensor and where it is located on the car


THE 2.2L ENGINE CAMSHAFT SENSOR LOCATED BACKSIDE OF THE ENGINE BLOCK TO THE LEFT OF THE KNOCK SENSOR. THE 2.4L ENGINE CAMSHAFT SENSOR LOCATED ON FRONT CAMSHAFT HOUSING TOP COVER LOOK DOWN ON TOP COVER WHERE IT SAYS 2.4L TWIN .SENSOR BELOW T ON TWIN ON TOP COVER.

Jul 08, 2011 | 2003 Pontiac Sunfire

1 Answer

2004 escape where is the crank position sensor located?


We would recommend taking a look at the front of your motor, by either of the camshafts and where they exit the head(s). The sensor is either a optical or hall effect sensor, so try and find a housing that is near or around your intake or exhaust camshaft ( or just single camshaft) for the location of your camshaft position sensor

Jan 27, 2010 | 2003 Ford Escape

1 Answer

Where is cam sensor on Volvo V40 (exact location)


Take a look at the front of your motor, The sensor is either a optical or hall effect sensor, so try and find a housing that is near or around your intake or exhaust camshaft or just single camshaft for the location of your camshaft position senso.

Sep 03, 2009 | 2003 Volvo V40

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...