Question about 2005 Kia Optima

1 Answer

Water pump, service ask $900.00 - 2005 Kia Optima

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

The price range for your repair should be around 450 to 695. the labor cost should be from 350 to 450 the parts should cost between 130 to 250.

If you have anymore questions please ask if not please accept the answer.

Good Luck

Posted on Oct 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much does a water pump replaced cost for a 2003 Jeep Liberty?


Water Pump Replacement Cost for Jeep Grand Cherokee ...

repairpal.com > Estimator > Jeep > Grand Cherokee
This is a national average for all Jeep Grand Cherokee model years, but you can make it more accurate by adding your car info and ZIP. ... When replacing the Jeep Grand Cherokee's water pump, the drive belts and/or timing belt may need to be removed. ...Jeep Grand Cherokee water pumps ...

Water Pump Replacement Service & Cost - YourMechanic

www.yourmechanic.com > Auto Repair and Maintenance Services
How much does Water Pump Replacement cost? Get an estimate instantly. Service, parts, cost & recommendations from YourMechanic. Your definitive guide to ...

Replacing a Water Pump Cost - CostHelper.com


Dec 01, 2015 | 2003 Jeep Liberty

3 Answers

There's a sound like a bad bearing coming from the water pump but no water coming out of the weep hole. i'm guessing the pump is bad. is this common for this car?


Bearings on a water pump failing on any car is a common problem! The water leaking from around the water pump area is the tell tale sign.........get it checked out and replaced as soon as possible to avoid further damage to the engine.

Oct 14, 2015 | 1993 Geo Prizm

1 Answer

I need to know what the pipe is called that the lower rad hose hooks up to at the back of the 3.0L automatic


its the water pump inlet tube , if its leaking coolant its more than likely the water pump if thats why you asking the question , worked on plenty of those engines and the weep hole for the water pump when the seal goes it leaks out and runs down under the intake manifold at the rear of the engine , timing belt water pump service end result

Jul 07, 2014 | 1998 Plymouth Grand Voyager

1 Answer

Water pump location


you are asking where it is?
which engine, never post questions, with out engine type.
cylinder count, displacement and if gas or diesel.
or just read the book called the FSM
its free to look
http://www.jeep4x4center.com/knowledge-base/index.htm?utm_source=cj#service

it while show all engines, so still need to know what engine it is to read the book. or buy parts or ask for help or, or,...

Feb 05, 2014 | 1999 Jeep Grand Cherokee

1 Answer

Do i have to remove my timing belt in order to replace my water pump in my 1997 ford thunderbird lx its a 4.6 v8


Your car use3s a timing chain not a belt. The water pump will be serviced by first removing the serpentine belt and then removing the water pump pulley and then finally removing the water pump. It is a fairly easy pump to replace.

If you have any further question please ask I I will be happy to help.

Aug 14, 2011 | 1997 Ford Thunderbird LX

1 Answer

Need a picture of a water pump housing for a 1998 eldorado


Water Pump Removal and Installation All Engines To Remove:
  1. Before servicing the vehicle, refer to the Cautions and Warnings in the beginning of this section.
  2. Remove or disconnect the following:
    • Coolant into a suitable container
    • Upper filler panel
    • Air cleaner assembly
    • Secondary AIR injection control valve gm_car_cad_sev_wtr_pmp_belt_shld.gif

    • Oil level indicator tube nut
    • Water pump belt shield fasteners
    • Water pump belt shield gm_car_cad_sev_wtr_pmp_drv_belt.gif

    • Water pump drive belt (D) gm_car_cad_sev_rad_outl_hos.gif

    • Radiator outlet hose from the thermostat housing gm_car_cad_sev_wtr_pmp_and_covr.gif

    • Water pump cover bolts
    • Water pump cover
    • Heater return hose
    gm_car_cad_sev_wtr_pmp_pulr.gif

  3. Position suitable water pump puller/installer tool (or special service tool J38816-A) to the water pump locking ears.
  4. Fasten the support plate to the water housing crossover to ensure proper engagement of the tool to the water pump locking ears.
  5. Remove or disconnect the following:
    • Pump from the housing:
      1. Use suitable water pump puller/installer tool (or special service tool J38816-A) to turn the pump clockwise
    • Support plate from the water housing crossover gm_car_cad_sev_wtr_pmp_rem.gif

    • Water pump
    • Seal from the water crossover
  6. Clean the sealing surfaces of the water housing crossover and the pump cover.
  7. Clean and inspect the water pump.
To Install:
  1. Install or connect the following:
    • Seal into the recessed portion of the water crossover
    gm_car_cad_sev_wtr_pmp_crosovr_seal.gif

    NOTE: The notched locking ear must be in the 7 o'clock position.
  2. Index the water pumps locking ears with the tangs in the water crossover.
  3. Position suitable water pump puller/installer tool (or special service tool J38816-A) to the water pump locking ears.
  4. Fasten the support plate to the water housing crossover to ensure proper engagement of the tool to the water pump locking ears.
  5. Turn suitable water pump puller/installer tool (or special service tool J38816-A) counterclockwise.
  6. Torque the water pump
    • Torque to: 74 ft. lbs. (100 Nm)
  7. Remove the support plate from the water housing crossover.
  8. Install or connect the following:
    • Water pump cover to the heater return hose
    • Water pump cover to the water housing crossover
    • Water pump cover bolts
      1. Torque to 89 inch. lbs. (10 Nm)
    • Radiator outlet hose to the thermostat housing
    • Water pump drive belt
  9. Place the water pump belt shield in position.
  10. Install or connect the following:
    • Water pump belt shield fasteners
      1. Torque to 89 inch. lbs. (10 Nm)
    • Oil level indicator tube nut
      1. Torque to 89 inch. lbs. (10 Nm)
    • Secondary AIR injection control valve
    • Air cleaner assembly
    • Upper filler panel
  11. Fill the cooling system.
  12. Start the engine then idle until normal operating temperature is attained.
  13. Recheck coolant level and top off as needed.
  14. Test drive the vehicle.
prev.gif next.gif

Aug 17, 2010 | 1998 Cadillac Eldorado

2 Answers

Water pump needs replacing looking for the layout on the 92 lasebre engine, would make things a whole lot easier


Loosen the bolts on the water pump pulley, then remove the belt, then remove the the 4 pulley bolts on the water pump. Then remove the water pump bolts, I think there's 6 bolts, size 8mm then remove the water pump.9b05c85.gif

Mar 04, 2010 | 1992 Buick LeSabre

1 Answer

1999 Tercel. Timing belt/water pump interval change?


Hello tinaromano1: The factory specification are to replace the belt every 90,000 miles in severe service. I would recommend to replace at 90,000 no matter what the service would be. Keep in mind should the belt break there is always a chance engine damage may occur. Should you need further help just ask. Thank You for using FixYa. Roger

Apr 15, 2009 | 1998 Toyota Tercel

2 Answers

Change water pump


If you have any questions feel free to ask. Let me know if you dont get diagrams(happens sometimes)

0900c1528004319d.jpgReverse rotation water pump—2.5L and 4.0L engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this manual.
  2. Drain the cooling system.
  3. Remove or disconnect the following: NOTESome 4.0L engines are equipped with a fan clutch that threads Directly on to the water pump shaft. This fan clutch is equipped with right-hand threads. NOTEDo not store the fan clutch assembly horizontally, silicone may leak into the bearing grease and cause contamination. NOTEOne of the water pump bolts is longer than the others. Note the location for reassembly.
    • Negative battery cable
    • Electric cooling fan connector
    • Accessory drive belt
    • Engine cooling fan and pulley
    • Water pump pulley
    • Power steering pump
    • Lower radiator hose from the water pump
    • Heater hose
    • Water pump and discard the gasket
To install:
  1. Clean the mating surfaces of all gasket material.
  2. Install or connect the following:
    • Water pump using a new gasket. Torque the bolts to 17 ft. lbs. (23 Nm).
    • Heater hose
    • Lower radiator hose
    • Water pump pulley. Torque the bolts to 20 ft. lbs. (27 Nm).
    • Power steering pump
    • Engine cooling fan and shroud. Torque the bolts to 31 inch lbs. (3 Nm).
    • Accessory drive belt
    • Electric cooling fan connector
    • Negative battery cable
  3. Fill and bleed the cooling system.
  4. Start the engine, check for leaks and repair if necessary.
3.7L Engine
  1. Before servicing the vehicle, refer to the precautions in the beginning of this manual.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    • Negative battery cable
    • Fan and clutch assembly from the pump
    • Fan shroud and fan assembly. If you’re reusing the fan clutch, keep it upright to avoid silicone fluid loss!
    • Lower hose
    • Water pump (8 bolts)
  4. Installation is the reverse of removal. Tighten the bolts, in sequence, to 40 ft. lbs. (54 Nm). 0900c1528004319e.jpgWater pump tightening sequence—3.7L

Nov 15, 2008 | 2002 Jeep Grand Cherokee

1 Answer

Abs


There are speed sensors for the abs in the front wheel bearing assemblies. Rust builds up and changes the air gap between the speed sensor and the reluctor ring inside of the hub. The rust needs to be cleaned away to restore the proper air gap it fix the problem.

Sep 03, 2008 | 1997 Chevrolet Blazer

Not finding what you are looking for?
2005 Kia Optima Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77186 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...