How do I remove the turn signal/light switch from a 94 Mercury tracer.

TURN OFF RADIO FIRST TO KEEP FROM LOCKING IT OUT.DISCONNECT NEGATIVE BATTERY CABLE WAIT 20 MINUTES FOR AIRBAG TO DISCHARGE THEN.REMOVE STEERING WHEEL COVER RETAINING SCREWS FROM THE BACK SIDE OF THE STEERING WHEEL AND REMOVE THE COVER.DISCONNECT THE HORN ELECTRICAL CONNECTOR AND THE SPEED CONTROL ELECTRICAL CONNECTORS IF EQUIPPED.REMOVE THE STEERING WHEEL MOUNTING NUT OR BOLT.YOU NEED A STEERING WHEEL PULLER TO REMOVE STEERING WHEEL DONT USE A HAMMER ON STEERING WHEEL BECAUSE IT WAS FACTORY MADE TO COLLAPSE DURING A CAR ACCIDENT.IF HIT STEERING WHEEL WITH HAMMER IT WILL COLLAPSE.USE STEERING WHEEL PULLER YOU CAN BUY ONE AT SEARS AUTO TOOLS OR SNAP ON TOOLS ALSO MOST AUTO PARTS STORE CARRY IT ALSO.OKAY AFTER REMOVING STEERING WHEEL.REMOVE THE 4 RETAINING SCREWS FROM THE STEERING COLUMN LOWER COVER AND REMOVE THE COVER REMOVE THE UPPER COVER.DISCONNECT THE 3 MULTIFUNCTION SWITCH ELECTRICAL CONNECTORS.REMOVE THE MULTIFUNCTION SWITCH RETAINING SCREW PULL THE ELECTRICAL CONNECTORS FROM THE RETAINING BRACKETS AND REMOVE THE SWITCH.INSTALL EVERYTHING VISA VERSA.TORQUE STEERING WHEEL MOUNTING BOLT TO 34 - 46 FT LBS.