WHAT STEPS DO I TAKE TO REPLACE A STARTER ON A TOYOTA COROLLA

SOURCE: replacing starter on 1988 toyota corolla

should be on the back of the engine block going into the transmission somewhere you may need to get under the car to access it good luck please rate -jeff

SOURCE: Replace a door handle on a 98 toyota

Here is step by step pictures:
http://www.bodyshopzone.com/archives/trim/door_panels/Toyota/Camry_2000_front/removal_f4.html

SOURCE: how to change a starter in a '94 toyota corolla

It's easier if you remove the air filter box and duct.

Frank
Frank's Friendly Cars Maui Car Rental
www.MauiCarRental.biz

SOURCE: how to replace alternator in 2000 toyota corolla

1. Before servicing the vehicle, refer to the Precautions section.
   
   NOTE It may be necessary to remove the gravel shield and work from underneath the car in order to gain access to the alternator retaining bolts.
   
2. Remove or disconnect the following:
   
   • Negative battery cable
     
   • Wiring from the alternator
     
   • Drive belt
     
   • Alternator
     

1. Install or connect the following:
   
   • Alternator. Torque the smaller bolt to 18 ft. lbs. (25 Nm) and the larger bolt to 40 ft. lbs. (54 Nm).
     
   • Alternator connector and wiring
     
   • Drive belt
     
   • Negative battery cable
     

Steve Allison

• 5569 Answers
• Posted on Oct 24, 2009

SOURCE: 1992 toyota corolla starter replacement

If you like doing your own repairs, I'd like to recommend having a Haynes service manual on hand; it will give you all the info you need to do home-based repairs:
'92 Toyota Corolla manual
We have a manual for each of our vehicles and even when a job is destined for a workshop, you can get a rough idea of how much labor it entails and therefore how much it should cost.