Question about 2000 Mercury Grand Marquis

Open Question

Turn signals not working on my 2000 merc. marquis, can it be a fuse or a bulb

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
goalie39
  • 469 Answers

SOURCE: turn signals and hazard don't work

Next best guess is the flasher unit has failed, this could be your little blue box, pick up a replacement at any auto parts store and replace it.

Posted on Apr 15, 2009

Ad
  • 11 Answers

SOURCE: need to replace both front turn signal light bulbs

Pop the hood, there is a tray that sits over the radiator, if the locks are still intact, twist them until the tray comes free, (There should be 3 plastic locks) remove the tray. Now you have access to the lights. There is an orange plug on both sides (L&R Headlights). Turn the plug until it frees up, then slide plug out of headlamp fixture. Then simply pull the bulb out and replace with new bulb.

Posted on Apr 27, 2010

  • 4 Answers

SOURCE: 2004 merc grand marquis. how to adjust headlights, replace turn s

ther is a plastic guard with 3 locking caps that need to be turned clockwise a quarter turn to remove. remove from the front. you will then have be able to see and have access to the lights and adjustment screws

Posted on Jun 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 merc grand marquis Headlights keep blowing a fuse


Does your Grand Marquis have head lamps with auto lamps ? Which fuse keeps blowing ? Could be a shorted LCM - lighting control module ?

Lighting Control Module (LCM)
The LCM eliminates the electronic interference and heat associated with the thermoelectric devices used previously. The LCM is a microprocessor-based module that controls several vehicle subsystems. It responds to electrical input signals from various switches, sensors, and external modules..

Visual Inspection Chart Mechanical Electrical
  • Headlamp switch
  • Central junction box (CJB) fuse(s).
    • 1 (15A)
    • 9 (20A)
    • 26 (10A)
    • 15 (7.5A)
    • 7 (10A)
  • Headlamp bulb
  • Circuitry
  • Headlamp switch
  • Lighting control module (LCM)
  • Underhood power distribution box (PDB)
    • F104 (40A)
    • F01 (20A)
    • F02 (25A)

Feb 12, 2017 | Cars & Trucks

1 Answer

Where is the flasher relay located on a 1969 mercury marquis ?


its located under the dash to the left of the steering colume. if you turn on the hazards and look under the dash you will see what the signal flasher looks like. they look the same. If I remember right these are mounted in the fuse panel but its been a while since I`ve seen a 69 merc.

Sep 18, 2014 | Cars & Trucks

1 Answer

I need to find the flasher relay for a grand marquis 2001 .does it has one? My turn signals wont work I can hear the sound but don't even flash


Yes, it does have a flasher, although it may be a combined unit with the hazard flashers relay. So you hear the clicking of the flasher relay? That seems to indicate the relay is working properly. Have you checked the bulbs and the turn signal fuse? Any turn signal bulbs light up anywhere, front or back?
How about your brake lights, do they work? Your car may have separate, stand alone turn signals in the rear, but many American cars use the same bulb and same filament on the bulb for the brake lights and turn signals. If your merc is like this and the brake lights work, then the bulb must be good.
Turn on the hazard flashers and see if all bulbs work and flash at each corner of the car. This would be the same bulb as for the turn signals. If they work, it could be a bad turn signal switch, may even be the flasher relay somehow malfunctioning, and in a few cases, a bad hazard switch can affect the turn signal switch. Check fuses and bulbs first. If you have any type of body control module that controls lights and other accessories, you may have to investigate that. I know I'm not being very helpful, just throwing out a few suggestions. Good luck.

May 21, 2012 | 2001 Mercury Grand Marquis

1 Answer

95 grand marquis no turn signals changed the switch still didnt work changed the lcm no change all the fuses are good . next problem have no climate control nothing lights up fuses are good thank you


check the turn signal flasher,also check the bulbs some autos,are designed to do this.
If there is a blown bulb,the turn signal on that side will not blink,but will burn steady to tell the driver,a short in wiring can also cause this

Sep 25, 2011 | 1998 Mercury Grand Marquis

1 Answer

2004 merc grand marquis. how to adjust headlights, replace turn s


ther is a plastic guard with 3 locking caps that need to be turned clockwise a quarter turn to remove. remove from the front. you will then have be able to see and have access to the lights and adjustment screws

May 26, 2010 | 2004 Mercury Grand Marquis

2 Answers

The turn signals do not work but the 4 ways do i have already replaced the flasher and the fuse what else can it be


If the fuse and the flasher are good and we know the wireing is good because the hazards work then you are down to the turn signal switch [unless you replaced the wrong flasher].

Nov 12, 2009 | 1994 Mercury Grand Marquis

1 Answer

The turn signals do not work on 2000 nissan exterra.Fuse was blown. Replaced and blew again after a few seconds.


1.Remove front & Rear turn signal Bulbs.
2.Replace Fuse.
3.Signal on.
4.Fix rear Signal Bulb.
5.Fix Front Signal Bulb.
7.If your Fuse blown.
8.Defect is There.

Jun 11, 2009 | 2000 Nissan Xterra

2 Answers

My 1985 Mercury marquis blinkers are not working


my need to replace turn signal switch on the steering coloum. Dont know if it will help or not.

Mar 28, 2009 | 1985 Mercury Marquis

3 Answers

Turn signal don't work or the flashers?


If you still have flasher problems, I read on Google to spray WD-40 down in and around the hazzard flasher button, then press it up and down several times...and BINGO...all flashers and signals worked again....just had some dirt and dust in the wiring....

Jan 24, 2009 | 1997 Mercury Grand Marquis

Not finding what you are looking for?
2000 Mercury Grand Marquis Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

fordexpert

Level 3 Expert

5522 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...