Question about 1996 Ford Escort 4 Door

1 Answer

I need to repace a solenoid/small or no purge flow condition for a 1996 ford escort lx1.9 motor.Ineed it for emmision testing.Where is the part located on top where the motor is or in the where the transmission is.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 7,753 Answers

The valve/solenoid is next to the battery--see picture below. here is the procedure from autozone.com. Let me know if you have questions.

Evaporative Emission (EVAP) Canister Purge Valve

  1. Disconnect the negative battery cable.
  2. Unplug the canister purge valve electrical connection.
  3. Tag and disconnect the vacuum lines from the valve.
  4. Remove the valve from the car.
To install:
  1. Install the valve and connect the vacuum hose.
  2. Attach the valve electrical connection.
  3. Connect the negative battery cable.

I need to repace a solenoid/small or no purge flow - d5d7dc5.gif

Posted on Oct 15, 2010

  • mannixx5183 Oct 15, 2010

    my name is joseph s romano thank-you and it was very helpful for this information that you sent me.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I keep getting a P0441 code -Evaporative Emission Control System Incorrect Purge Flow on my 1996 chevy camaro it has the 3.5 v6 motor


TO TEST WHERE THE PROBLEM IS COMING FROM IT'S A LEAK TEST MAKE WITH SPECIAL TOOL .
LOOK FOR PURGE SOLENOID STUCK OPEN

Oct 15, 2013 | 1996 Chevrolet Camaro

1 Answer

Codes0441 0442 0455 0456


codes po441 po442 po455 po456. code po441 - EVAP system no flow during purge conditions.code po442 -EVAP system small leak detected conditions. code po455 - EVAP system large leak detected conditions.code po456 - EVAP system very small leak detected. possible causes loose damaged missing fuel cap.fuel tank sensor disconnected or failed. ORING on top fuel sending unit leaking.purge valve vapor line clogged disconnected or purge solenoid failed.vent solenoid not closing or has failed.

May 23, 2013 | 2002 Dodge Durango

1 Answer

What does Evap pressure sensor failure means. ihave 97 ford escort, 94,000 miles


Hi Vanessa,

Diagnostic Test Code (DTC) P1443 has a "generic" description of "Very Small Or No Purge Flow Condition"
To put it very simply, the Powertrain Control Mdule (PCM) is commanding the Canister Purge (CANP) solenoid to open and purge the fuel vapors from your charcoal canister and fuel tank. Then it "looks" at data from the Purge Flow (PF) sensor to see if if the CANP solenoid complied with its command. This is not occuring as it should. (see the picture below to see how all these parts work together)

Here is a list of the possible causes of this code:
> Leaks in fuel tank, filler cap or vapor hoses
> Wiring harness circuits (CANP SIG, PF, PWR GND, VMV and VPWR)
> Faulty Canister Purge (CANP) solenoid
> Faulty Purge Flow (PF) sensor
> Faulty Vapor Management Valve (VMV)
> Faulty carbon canister
> Faulty PCM
The system must be diagnosed to find out which parts of the system are functioning correctly and which are not, so the fault can be found. The computer only knows that the data from the PF sensor is not what it should be - it does not know WHY.


11_2_2011_12_22_52_am.gif

Nov 01, 2011 | 1997 Ford Escort

1 Answer

P1441 evap system flow during nonpurge


CODE P1441 -- EVAP SYSTEM FLOW DURING NON PURGE CONDITIONS. POSSIBLE CAUSES. EVAP PURGE VALVE PIPE OR THE CHARCOAL CANISTER HAS A TEMPORARY BLOCKAGE. FTP SENSOR IS OUT OF CALIBRATION DAMAGED OR IT IS SKEWED. EVAP PURGE SOLENOID VALVE IS DAMAGED OR HAS FAILED. PCM HAS FAILED.

Jul 06, 2011 | 1996 Buick Roadmaster

2 Answers

Diagnostic code for 96 ford ranger-code number - p1443


Check the voltage on the purge flow (PF) sencor, with engine running...

Jun 19, 2011 | Ford Ranger Cars & Trucks

1 Answer

I got a 1996 ford thunderbird 6 cly and the problem is a p1443 i need to know what i do to fix this or even if it is worth fixing and a est about how much it would cost thank you


CODE P1443 - LOW PURGE FLOW OR NO PURGE FLOW CONDITION DETECTED.POSSIBLE CAUSES EVAP CANISTER PURGE VALVE STUCK CLOSED MECHANICALLY FUEL VAPOR HOSE BLOCKED BETWEEN EVAP PURGE VALVE AND THE FTP SENSOR OR BLOCKED BETWEEN PURGE VALVE AND INTAKE MANIFOLD OR VACUUM HOSE BLOCKED BETWEEN PURGE VALVE AND INTAKE MANIFOLD.CANT GIVE PRICE CHECK UNTIL FIND OUT THE PROBLEM.

May 04, 2011 | 1996 Ford Thunderbird LX

2 Answers

Check engine lite came on code is p1443 what does this code mean


P1443 Evaporative Emission Control System Control Valve The Evaporative Emission Control System monitors the fuel vapor flow between the engine intake manifold and the EVAP canister. The system failure occurs when a leak or blockage between the intake manifold, the EVAP canister purge valve and the EVAP canister is detected by the PCM.

Code P1443 Possible Causes:

- Pinched, blocked or plugged fuel vapor tubes/hoses (except between fuel tank and EVAP canister)

- Damaged EVAP canister

- Disconnected, cracked or cut fuel vapor tubes/hoses (except between fuel tank and EVAP canister)

- Damaged EVAP canister purge valve

May 04, 2011 | 1997 Ford Escort

1 Answer

CEL comes on, I throw a fix at it, reset the light and then check with code reader and it says all systems ok after trip cycle.......drive about 25 to 50 miles after that and it comes back on again same...


You have to find and repair the EVAP problem

PO1443--Very Small or No Purge Flow Condition

Blocked Hose
Loose Fuel Vapor Hose to EVAP system components
Vacuum Line from intake manifold to evap solenoid ,off/loose
and other things

Nov 04, 2010 | 1996 Ford Ranger SuperCab

1 Answer

How to fix obd2 code 1443 on 96 ford ranger emisson test failed


It is usually carbon pieces from the evap carbon canister clogging the purge solenoid and purge flow sensor. There should still be a one piece purge solenoid and purge sensor with hose assembly available. You will also need to replace the carbon storage canister.
After replacement disconnect the negative battery cable, hold your foot on the brake pedal for 30 seconds, then reconnect the battery.

Oct 25, 2009 | 1996 Ford Ranger SuperCab

Not finding what you are looking for?
1996 Ford Escort 4 Door Logo

1,020 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...